Engineering Papers⌕ Search

Engineering topics

Zhang, Chi

Publications and source records attributed to Zhang, Chi.

At least 73 records · Page 4

A two-set order parameters phase-field modeling of crack deflection/penetration in a heterogeneous microstructure

Modeling of crack deflection/penetration or manifested as intergranular/transgranular fracture in polycrystals has long been a challenge in both fracture mechanics and materials science. A phase-field model formulated with two-set order parameters describing the crack field and the microstructure field respectively, is herein established to investigate the competition between crack penetration and deflection at an interface. The advantages of the proposed model are three-fold: (1) the fracture toughness of grain boundaries and/or interfaces, besides single crystal properties (e.g., Young’s modulus, Poisson ratio, and fracture toughness), can be automatically incorporated, (2) cohesive interfaces are treated in one phase-field framework in comparison with the integrated phase-field and cohesive zone model in which cohesive elements have to be manually placed at the interface, and (3) two-set order parameters enable to describe the concurrent crack propagation and microstructure evolution. The proposed model is validated by comparing the simulated critical deflection angles with the results from theoretical analysis of the linear elastic fracture mechanics and the experiments. The model is then applied to a heterogeneous Silicon Nitride polycrystal to determine the effect of interface fracture toughness on the intergranular/transgranular fracture transition and the effective toughness of the materials.

Chen, Hu↗

Impact of Long-Course Neoadjuvant Radiation on Postoperative Low Anterior Resection Syndrome and Quality of Life in Rectal Cancer: Post Hoc Analysis of a Randomized Controlled Trial

Background: Neoadjuvant radiation is recommended for locally advanced rectal cancer, with proven benefit in local control but not in disease-free survival. However, the impact of long-course radiation on postoperative bowel function and quality of life (QOL) remains controversial. This study aimed to investigate the impact of long-course neoadjuvant radiation on bowel function and QOL, and to identify risk factors for severe bowel dysfunction. Methods: Patients who underwent long-course neoadjuvant chemoradiotherapy (nCRT) or chemotherapy (nCT) followed by radical low anterior resection for locally advanced rectal cancer were recruited from the FOWARC randomized controlled trial. Low anterior resection syndrome (LARS) score and European Organisation for Research and Treatment of Cancer (EORTC) C30/CR29 questionnaires were used to assess bowel function and QOL, respectively. Results: Overall, 220 patients responded after a median follow-up of 40.2 months, of whom 119 (54.1%) reported major LARS, 74 (33.6%) reported minor LARS, and 27 (12.3%) reported no LARS. Compared with the nCT group, the nCRT group reported more major LARS (64.4% vs. 38.6%, p < 0.001) and worse QOL. Long-course neoadjuvant radiation (OR 2.20, 95% CI 1.24–3.91; p = 0.007), height of anastomosis (OR 0.74, 95% CI 0.63–0.88; p < 0.001), and diverting ileostomy (OR 2.59, 95% CI 1.27–5.30; p = 0.009) were independent risk factors for major LARS. Conclusions: Long-course neoadjuvant radiation, along with low anastomosis, are likely independent risk factors for postoperative bowel function and QOL. Our findings might have implications for alleviating LARS and improving QOL by informing selection of neoadjuvant treatment.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Bandgap prediction by deep learning in configurationally hybridized graphene and boron nitride

Abstract It is well-known that the atomic-scale and nano-scale configuration of dopants can play a crucial role in determining the electronic properties of materials. However, predicting such effects is challenging due to the large range of atomic configurations that are possible. Here, we present a case study of how deep learning algorithms can enable bandgap prediction in hybridized boron–nitrogen graphene with arbitrary supercell configurations. A material descriptor that enables correlation of structure and bandgap was developed for convolutional neural networks. Bandgaps calculated by ab initio calculations, and corresponding structures, were used as training datasets. The trained networks were then used to predict bandgaps of systems with various configurations. For 4 × 4 and 5 × 5 supercells they accurately predict bandgaps, with a R 2 of >90% and root-mean-square error of ~0.1 eV. The transfer learning was performed by leveraging data generated from small supercells to improve the prediction accuracy for 6 × 6 supercells. This work will pave a route to future investigation of configurationally hybridized graphene and other 2D materials. Moreover, given the ubiquitous existence of configurations in materials, this work may stimulate interest in applying deep learning algorithms for the configurational design of materials across different length scales.

Dong, Yuan↗

Characterization of Static Recrystallization of a Ni-Cr-Mo-Based C276 Superalloy in Two-Stage Isothermal Compression

In order to clarify the microstructure evolution characteristics during holding period after slight degree of deformation for a Ni-Cr-Mo-based C276 superalloy, two-stage isothermal compression tests have been performed at the temperature range of 1000-1150 °C and the strain rate range of 0.1-5 s{sup −1}. The stress–strain curves and microstructure observation infer that both static recovery (SRV) and static recrystallization (SRX) took place during the holding period when the specimens were deformed at 1100-1150 °C and only SRV occurred in the specimens that deformed at the temperatures lower than 1100 °C. The softening effects increase with the increasing temperature and deformation degree, while the influence of strain rate seems less pronounced because of the limited stored energy resulted from the small deformation. The grain boundary characteristics, analyzed using electron backscatter diffraction technique, indicate that high densities of twins and Σ3 grain boundaries form associated with the nucleation and growth of SRX grains. Finally, the recrystallization during and after deformation, i.e., dynamic recrystallization, SRX and metadynamic recrystallization, was discussed concurrently.

36 MATERIALS SCIENCE↗

Cellular Automaton Modeling of Dynamic Recrystallization of Nimonic 80A Superalloy Based on Inhomogeneous Distribution of Dislocations Inside Grains

A modified cellular automaton (CA) model in the time and space scale is developed to simulate the dynamic recrystallization (DRX) mechanism of Nimonic 80A nickel-base superalloy during hot deformation. Some necessary thermo-mechanical parameters used as input data in CA approach such as work hardening and softening coefficient are fitted according to the previous hot compression experiments. Based on the experimental results, nucleation kinetics is modified as a function of Zener-Holloman parameter. A dislocation density model at transient recrystallization boundary is proposed, in which the dislocation density is a function of temperature, strain rate and annealed dislocation density. The simulated results are in good agreement with experimental results, proving that the modified CA model is capable of predicting both flow behavior and microstructural evolution of Nimonic 80A during hot deformation. According to the experimental and simulated results, the DRX behavior is discussed in detail. It demonstrates that the flow stress and microstructural evolution of DRX have a relationship with the deformation temperature and strain rate.

36 MATERIALS SCIENCE↗

Experimental Study on the Hot Deformation Characterization of Low-Carbon Nb-V-Ti Microalloyed Steel

X80 steel, as typical low-carbon Nb-V-Ti microalloyed steel, is getting more and more attention in oil and gas transmission pipeline manufacturing. In this paper, the hot deformation behavior of X80 steel has been investigated. Hot compression tests of the steel were conducted under different temperatures and strain rates. Based on the experimental data, the flow stress constitutive equations were established. It is found that the hot deformation activation energy of this steel is higher than C-Mn and low-carbon steel. Then, the kinetics model and grain size model of dynamic recrystallization were developed according to the flow curves and the optical microstructures. In addition, the processing maps were developed to analyze the workability of X80 steel at elevated temperature. The analysis results show that the optimum processing window is at the temperature of 1300-1473 K and the strain rate of 0.01-10 s{sup −1}. The microstructure observation indicates that the optimum processing parameters are applicable to the tested steel.

36 MATERIALS SCIENCE↗

Formation of TiO2 nanoribbons by anodization under high current density

Highlights: • TiO{sub 2} nanotubes were obtained under low current density. • TiO{sub 2} nanoribbons were obtained under high current density. • The pore walls of top TiO{sub 2} nanotubes are obviously thinner than other part. • Micro-liquid-flow causes the appearance of TiO{sub 2} nanoribbons. - Abstract: Highly ordered TiO{sub 2} nanoribbons are obtained by anodizations in NH{sub 4}F electrolyte under high current density. Although intact TiO{sub 2} nanoribbons appear, there are still nanotubes beneath nanoribbons. It is reasonable to speculate that TiO{sub 2} nanoribbons evolve from TiO{sub 2} nanotubes. While the applied current is high, the electronic current is also high, which gives rise to lots of oxygen bubbles. With the accumulation of oxygen bubbles, oxygen bubbles must expand upward and rupture finally. Therefore, gas flow from oxygen bubbles results in the generation of micro-liquid-flow. Because of micro-liquid-flow, the nanotube wall is corroded and scoured. The corrosion of upper pore wall is the most sever and thus the upper pore wall becomes the thinnest locality of nanotube wall. As a result, the nanotubes can collapse easily. Finally, one TiO{sub 2} nanotube is divided into several TiO{sub 2} nanoribbons while there is still intact tube beneath nanoribbons.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Mechanistic Understanding of Uranyl Ion Complexation on Montmorillonite Edges: A Combined First-Principles Molecular Dynamics–Surface Complexation Modeling Approach

Systematic first-principles molecular dynamics (FPMD) simulations were carried out to study the structures, free energies, and acidity constants of UO 2 2+ surface complexes on montmorillonite in order to elucidate the surface complexation mechanisms of the uranyl ion (UO 2 2+ ) on clay mineral edges at the atomic scale. Four representative complexing sites were investigated, that is, ≡Al(OH) 2 and ≡AlOHSiO on the (010) surface and ≡AlOHOa and ≡SiOOa on the (110) surface. The results show that uranyl ions form bidentate complexes on these sites. We report all calculated binding free energies for these complexes are very similar. These bidentate complexes can be hydrolyzed, and their corresponding derived p K a values (around 5.0 and 9.0 for p K a1 and p K a2 , respectively) indicate that UO 2 (OH) + and UO 2 (OH) 2 surface groups are the dominant surface species in the environmental pH range. The OH groups of UO 2 (OH) 2 surface complexes can act as complexing sites for subsequent metals. Additional simulations showed that such multinuclear adsorption is feasible and can be important at high pH. Furthermore, FPMD simulation results served as input parameters for an electrostatic thermodynamic surface complexation model (SCM) that adequately reproduced adsorption data from the literature. Overall, this study provides an improved understanding of UO 2 2+ complexation on clay mineral edge surfaces.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Apixaban attenuates ischemia-induced myocardial fibrosis by inhibition of Gq/PKC signaling

Highlights: • Apixaban attenuates ischemia-induced myocardial fibrosis. • Ischemia-induced myocardial fibrosis shows higher thrombin level. • Thrombin induced collagen deposition in cardiac fibroblasts. • Thrombin induced collagen deposition by activation of Gq/PKC signaling. • Inhibition of Gq/PKC blunts ischemia-induced myocardial fibrosis. It was previously found that patients with symptom of myocardial dysfunction had increased levels of thrombin. Apixaban is one of the novel oral anticoagulant drugs widely used in clinic. As the inhibitor of FXa (prothrombin), it inhibits prothrombin conversion into thrombin leading to thrombin deficiency in vivo. However, the effects of apixaban on myocardial fibrosis were still unclear, and the concomitant molecular mechanisms remain to be investigated. Here, we showed that myocardial fibrosis-bearing mice induced by continuous myocardial ischemia (MI) had higher levels of thrombin. Orally administration of apixaban significantly abrogated fibrosis condition and thrombin levels. In vitro, thrombin induced collagen deposition in primary cardiac fibroblasts in a dose-dependent manner. Mechanistic experiments showed that thrombin induced collagen deposition by activation of the Par-1-coupled Gq/PKC signaling. Genetic ablation of Gq or pharmacological inhibition of PKC effectively blunted thrombin-induced collagen deposition in cardiac fibroblasts. Moreover, administration of PKC inhibitor or Gq antagonist obviously blocked MI-induced myocardial fibrosis in mice. To conclude, apixaban attenuates MI-induced myocardial fibrosis by inhibition of thrombin-dependent Par-1/Gq/PKC signaling axis.

60 APPLIED LIFE SCIENCES↗

Uncovering transcription factor and microRNA risk regulatory pathways associated with osteoarthritis by network analysis

Osteoarthritis (OA) is the most common form of joint disease. The development of inflammation have been considered to play a key role during the progression of OA. Regulatory pathways are known to play crucial roles in many pathogenic processes. Thus, deciphering these risk regulatory pathways is critical for elucidating the mechanisms underlying OA. We constructed an OA-specific regulatory network by integrating comprehensive curated transcription and post-transcriptional resource involving transcription factor (TF) and microRNA (miRNA). To deepen our understanding of underlying molecular mechanisms of OA, we developed an integrated systems approach to identify OA-specific risk regulatory pathways. In this study, we identified 89 significantly differentially expressed genes between normal and inflamed areas of OA patients. We found the OA-specific regulatory network was a standard scale-free network with small-world properties. It significant enriched many immune response-related functions including leukocyte differentiation, myeloid differentiation and T cell activation. Finally, 141 risk regulatory pathways were identified based on OA-specific regulatory network, which contains some known regulator of OA. The risk regulatory pathways may provide clues for the etiology of OA and be a potential resource for the discovery of novel OA-associated disease genes.

60 APPLIED LIFE SCIENCES↗

American Gut: an Open Platform for Citizen Science Microbiome Research

Although much work has linked the human microbiome to specific phenotypes and lifestyle variables, data from different projects have been challenging to integrate and the extent of microbial and molecular diversity in human stool remains unknown. Using standardized protocols from the Earth Microbiome Project and sample contributions from over 10,000 citizen-scientists, together with an open research network, we compare human microbiome specimens primarily from the United States, United Kingdom, and Australia to one another and to environmental samples. Our results show an unexpected range of beta-diversity in human stool microbiomes compared to environmental samples; demonstrate the utility of procedures for removing the effects of overgrowth during room-temperature shipping for revealing phenotype correlations; uncover new molecules and kinds of molecular communities in the human stool metabolome; and examine emergent associations among the microbiome, metabolome, and the diversity of plants that are consumed (rather than relying on reductive categorical variables such as veganism, which have little or no explanatory power). We also demonstrate the utility of the living data resource and cross-cohort comparison to confirm existing associations between the microbiome and psychiatric illness and to reveal the extent of microbiome change within one individual during surgery, providing a paradigm for open microbiome research and education. We show that a citizen science, self-selected cohort shipping samples through the mail at room temperature recaptures many known microbiome results from clinically collected cohorts and reveals new ones. Of particular interest is integrating n = 1 study data with the population data, showing that the extent of microbiome change after events such as surgery can exceed differences between distinct environmental biomes, and the effect of diverse plants in the diet, which we confirm with untargeted metabolomics on hundreds of samples.

59 BASIC BIOLOGICAL SCIENCES↗