Engineering Papers⌕ Search

Engineering topics

Zhang, Cheng

Publications and source records attributed to Zhang, Cheng.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A perspective on challenges and opportunities in developing high entropy-ultra high temperature ceramics

The emergence of a new class of high entropy ultra-high temperature ceramics (HE-UHTCs) is expected to possess exceptionally superior mechanical, oxidation, and erosion resistance as compared to conventional UHTCs. The improvement in the properties of HE-UHTCs is attributed to the high configurational entropy of the multi-component system stabilized into a single-phase, but with little discussion on entropy contributions. This perspective article presents a viewpoint on the critical scientific question regarding the actual role entropy plays in stabilizing and enhancing the thermo-mechanical properties of a multi-component system. The high throughput first-principle calculations, which can provide the entropy formation ability (EFA) of thermodynamically stable HE-UHTCs, can prove to be valuable toolset to this puzzle. HE-UHTCs show enhancement in the mechanical properties much higher than the predicted rule of the mixture, which cannot traditionally be explained by a mere solid solution formation effect. Additionally, isothermal oxidation studies of HE-UHTCs limited to furnace testing state remarkable oxidation resistance which is attributed to the passivity of complex, layered structure, and composition of the oxide scale. However, whether all the constituents in the HE-UHTC system react simultaneously or preferential oxidation takes place needs to be addressed. To address all these issues, an integrated computational and experimental approach has been postulated towards designing a thermal protection system (TPS) for re-entry applications. Succeeding the approach will provide new opportunities in the compositional space of HE-UHTCs with tailored properties.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Polymer Entrapment Flash Pyrolysis for the Preparation of Nanoscale Iridium-Free Oxygen Evolution Electrocatalysts

This paper describes the use of a new polymer entrapment flash pyrolysis (PEFP) method for making nanoscale yttrium ruthenate (Y 2 Ru 2 O 7-δ ) electrocatalysts. Here, this approach effectively reduced the synthesis temperature of phase-pure pyrochlore catalysts from 1000 °C to 550 °C, and greatly suppressed the sintering of catalyst particles. The supported nanocrystalline Y 2 Ru 2 O 7-δ catalysts showed enhanced activity towards oxygen evolution reaction (OER) in acidic electrolyte and were stable at 1.50 V for the comparative study (>20 h) under the current density of 10 mA/cm 2 geo in chronopotentiometry testing. This is equivalent to an overpotential value of 270 mV, about half of that of the reference IrO 2 catalyst. X-ray absorption spectroscopy (XAS) and transmission electron microscopy (TEM) analysis showed that the high-surface-area Y 2 Ru 2 O 7-δ catalyst had an oxygen-deficient structure. This study provides a route to the synthesis of fine ceramic (or oxide)-based electrocatalysts for making high-performing electrocatalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Densification and oxidation behavior of spark plasma sintered Hafnium Diboride-Hafnium Carbide composite

This study reports on the sintering and oxidation behaviors of Hafnium Diboride (HfB 2 ) and Hafnium Carbide (HfC) based ultra-high temperature ceramic (UHTC) composites. Pure Hafnium Diboride, Hafnium Carbide, and HfB 2 -50 vol% HfC composite were consolidated using spark plasma sintering (SPS) without the use of sintering aids. HfB 2 -HfC composite displayed a high sintered density of 98% as compared to 87% density of pure HfB 2 . The increased density of the HfB 2 -HfC composite is attributed to the bimodal powder distribution, which allowed for the smaller HfC particle to occupy the voids between the larger HfB 2 particles resulting in improved packing efficiency. Moreover, the higher planar surface energy, for the (111) and the (200) planes for HfC, contributed to the smaller HfC particle being a significant driving force in the sintering process. Oxidation studies of each material were carried out by exposing them to a high-speed plasma jet in a temperature exceeding 2700 °C. The results of these studies show an improved oxidation resistance of HfB 2 -HfC composite by 54% and 70% over pure HfC and HfB 2 , respectively. The enhanced oxidation behavior is attributed to B 2 O 3 filling in the porosity between the HfO 2 scale and protecting the underlying material. This study provides a new alternative to improve the sinterability of UHTC diborides by introducing another UHTC (i.e., HfC) to form a fully dense composite without sintering aid and superior oxidation resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

MEMOTE for standardized genome-scale metabolic model testing

Reconstructing metabolic reaction networks enables the development of testable hypotheses of an organism’s metabolism under different conditions. State-of-the-art genome-scale metabolic models (GEMs) can include thousands of metabolites and reactions that are assigned to subcellular locations. Gene–protein–reaction (GPR) rules and annotations using database information can add meta-information to GEMs. GEMs with metadata can be built using standard reconstruction protocols, and guidelines have been put in place for tracking provenance and enabling interoperability, but a standardized means of quality control for GEMs is lacking. Here we report a community effort to develop a test suite named MEMOTE (for metabolic model tests) to assess GEM quality.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Anomalously Large Seebeck Coefficient of CuFeS 2 Derives from Large Asymmetry in the Energy Dependence of Carrier Relaxation Time

The Seebeck effect in a material originates from the distribution of asymmetry in the electron transport under a temperature gradient, which has contributions from the energy-dependent electronic density-of-states and carrier mobility. However, because the energy dependence of common electron scattering mechanisms is weak, the mobility-driven Seebeck coefficient has long been ignored in most thermoelectric materials, and the energy asymmetry of the density-of-states has been considered the dominant contribution. In this work, we describe a hopping transport behavior observed in CuFeS 2 , and a large carrier Hall mobility gradient of dμH/dT that creates an unusually large energy-dependent mobility contribution to the Seebeck coefficient. This work offers several ideas regarding the mobility-driven Seebeck effect and its potential utilization in the design of thermoelectric materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High-Resolution Laser-Induced Graphene. Flexible Electronics beyond the Visible Limit

Laser-induced graphene (LIG) is a multifunctional graphene foam that is commonly direct-written with an infrared laser into a carbon-based precursor material. Here, a visible 405 nm laser is used to directly convert polyimide into LIG. This enabled the formation of LIG with a spatial resolution of ~12 μm and a thickness of <5 μm. The spatial resolution enabled by the relatively smaller focused spot size of the 405 nm laser represents a >60% reduction in LIG feature sizes reported in prior publications. This process occurs in situ in an SEM chamber, thus allowing direct observation of LIG formation. The reduced size of the LIG features enables the direct-write formation of flexible electronics that are not visible to the unaided eye. A humidity sensor is demonstrated which could detect human breath with a response time of 250 ms. With the growing interest in LIG for flexible electronics and sensors, finer features can greatly expand its utility.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Large Thermal Conductivity Drops in the Diamondoid Lattice of CuFeS 2 by Discordant Atom Doping

Doping in a lattice refers to the introduction of very small quantities of foreign atoms and has a generally small effect on decreasing the lattice thermal conductivity, unlike alloying which involves large fractions of other elements and strongly enhances point defect phonon scattering. Here, we report that, by alloying only 3% of In on the Cu sites of the diamond-like lattice of CuFeS 2 chalcopyrite compound (Cu 1-x In x FeS 2 , x = 0.03) has a disproportionally large effect in reducing the lattice thermal conductivity of the compound from 2.32 to 1.36 Wm -1 K -1 at 630 K. We find that In is not fully ionized to +3 when on the Cu sublattice and exists mainly in the +1 oxidation state. The 5s 2 lone pair of electrons of In + makes this atom incompatible (referred to as discordant) with the tetrahedral geometry of the crystallographic site. This causes strong local bond distortions thereby softening the In-S and Cu-S chemical bonds and introducing localized low frequency vibrations. The latter couple with the base phonon frequencies of the CuFeS 2 matrix enhancing the anharmonicity and decreasing the phonon velocity, and consequently the lattice thermal conductivity. Here, the control material in which the In doping is on the Fe 3+ site of the structure at the same doping level (and found in the site-compatible In 3+ state), has a far smaller effect on the phonon scattering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Crowdsourced reliable labeling of safety-rule violations on images of complex construction scenes for advanced vision-based workplace safety

Construction workplace hazard detection requires engineers to analyze scenes manually against many safety rules, which is time-consuming, labor-intensive, and error-prone. Computer vision algorithms are yet to achieve reliable discrimination of anomalous and benign object relations underpinning safety violation detections. Recently developed deep learning-based computer vision algorithms need tens of thousands of images, including labels of the safety rules violated, in order to train deep-learning networks for acquiring spatiotemporal reasoning capacity in complex workplaces. Such training processes need human experts to label images and indicate whether the relationship between the worker, resource, and equipment in the scenes violate spatiotemporal arrangement rules for safe and productive operations. False alarms in those manual labels (labeling no-violation images as having violations) can significantly mislead the machine learning process and result in computer vision models that produce inaccurate hazard detections. Compared with false alarms, another type of mislabels, false negatives (labeling images having violations as “no violations”), seem to have fewer impacts on the reliability of the trained computer vision models.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Programmable Electrofluidics for Ionic Liquid Based Neuromorphic Platform

Due to the limit in computing power arising from the Von Neumann bottleneck, computational devices are being developed that mimic neuro-biological processing in the brain by correlating the device characteristics with the synaptic weight of neurons. This platform combines ionic liquid gating and electrowetting for programmable placement/connectivity of the ionic liquid. In this platform, both short-term potentiation (STP) and long-term potentiation (LTP) are realized via electrostatic and electrochemical doping of the amorphous indium gallium zinc oxide (aIGZO), respectively, and pulsed bias measurements are demonstrated for lower power considerations. While compatible with resistive elements, we demonstrate a platform based on transitive amorphous indium gallium zinc oxide (aIGZO) pixel elements. Using a lithium based ionic liquid, we demonstrate both potentiation (decrease in device resistance) and depression (increase in device resistance), and propose a 2D platform array that would enable a much higher pixel count via Active Matrix electrowetting.

36 MATERIALS SCIENCE↗