Engineering Papers⌕ Search

Engineering topics

Zarkevich, Nikolai

Publications and source records attributed to Zarkevich, Nikolai.

Fifth-degree elastic energy for predictive continuum stress-strain relations and elastic instabilities under large strain and complex loading in silicon

Materials under complex loading develop large strains and often phase transformation via an elastic instability, as observed in both simple and complex systems. Here, we represent a material (exemplified for Si I) under large Lagrangian strains within a continuum description by a 5th-order elastic energy found by minimizing error relative to density functional theory (DFT) results. The Cauchy stress—Lagrangian strain curves for arbitrary complex loadings are in excellent correspondence with DFT results, including the elastic instability driving the Si I → II phase transformation (PT) and the shear instabilities. PT conditions for Si I → II under action of cubic axial stresses are linear in Cauchy stresses in agreement with DFT predictions. Such continuum elastic energy permits study of elastic instabilities and orientational dependence leading to different PTs, slip, twinning, or fracture, providing a fundamental basis for continuum physics simulations of crystal behavior under extreme loading.

Levitas, Valery↗

Giant enhancement of the magnetocaloric response in Ni–Co–Mn–Ti by rapid solidification

Magnetocaloric refrigeration is a solid-state cooling approach that assures high energy efficiency and low environmental impact. It remains uncompetitive with conventional vapor-compression technologies due to lack of high-performing materials that exhibit large magnetocaloric effects in low magnetic fields. In this work we report a game-changing enhancement of the magnetocaloric response in a transition-metal-based Ni–Co–Mn–Ti. Mechanically and chemically stable rapidly solidified ribbons exhibit magnetic entropy changes as high as ~27J·kg –1 K –1 for a moderate field change of 2T, comparable to or larger than the best known materials for near-room temperature applications. The ribbons can be easily manufactured in large quantities and the transition temperature can be adjusted by varying Co concentration.

36 MATERIALS SCIENCE↗

Effects of Cooling Rate on 6.5% Silicon Steel Ordering

Increasing Si content improves magnetic and electrical properties of electrical steel, with 6.5% Si as the optimum. Unfortunately, when Si content approaches 5.7%, the Fe-Si alloy becomes brittle. At 6.5%, the steel conventional cold rolling process is no longer applicable. The heterogeneous formation of B2 and D03 ordered phases is responsible for the embrittlement. The formation of these ordered phases can be impeded by rapid cooling. However, only the cooling rates of water and brine water were investigated. A comprehensive study of the effect of rapid cooling rate on the formation of the ordered phases was carried out by varying wheel speed and melt-injection rate. Thermal imaging employed to measure cooling rates while microstructures of the obtained ribbons are characterized using X-ray diffraction and TEM. The electrical, magnetic and mechanical properties are characterized using 4-pt probe, VSM, and macro-indentation methods. The relations between physical properties and ordered phases are established.

36 MATERIALS SCIENCE↗

Effects of Cooling Rate on 6.5% Silicon Steel Ordering

Increasing Si content improves magnetic and electrical properties of electrical steel, with 6.5% Si as the optimum. Unfortunately, when Si content approaches 5.7%, the Fe-Si alloy becomes brittle. At 6.5%, the steel is so brittle that a conventional cold rolling process is no longer applicable. The heterogeneous formation of B2 and D03 ordered phases is responsible for the severe material embrittlement. Studies show that the formation of these ordered phases can be impeded by rapid cooling. However, due to the availability of quenching media, only the cooling rates of water and brine water were investigated. At Ames Laboratory, a comprehensive study of the effect of rapid cooling rate on the formation of the ordered phases was carried out. Melt spin method was used to prepare thick steel ribbon. A wide range of cooling rates was achieved by varying wheel speed and melt-injection rate. A calibrated high-resolution thermal camera was used to measure temperature changes during solidification. The microstructures of the obtained ribbons were characterized using X-ray diffraction and TEM. The electrical, magnetic and mechanical properties were characterized using 4-pt probe, VSM, and macro-indentation methods. The relations between these physical properties and ordered phases were established.

36 MATERIALS SCIENCE↗

ThermoPhonon

ThermoPhonon is a stand-alone code, which can be integrated into other software packages. Typically, it is used together with a density functional theory (DFT) code (such as VASP, Wien2k, AbInit, SIESTA) and a phonon code (such as Phonopy or Phon). The workflow is the following. Molecular dynamics (MD) in a supercell at a given temperature T is performed using another code. After sufficient equilibration, the output in the form of atomic positions and forces for a large number of selected MD steps is recorded into a file. If needed, one can modify this file by applying additional constraints, such as enforced crystal symmetry or subtracted motion of the center of mass. ThermoPhonon reads the file with atomic positions and forces and writes a new file with the force constants. Force constants can be used by another code (such as Phonopy or Phon) to produce phonon spectrum for plotting, in the assumption of known equilibrium atomic positions provided in a separate file.

Zarkevich, Nikolai↗

ThermoPhonon

ThermoPhonon is a stand-alone code, which can be integrated into other software packages. Typically, it is used together with a density functional theory (DFT) code (such as VASP, Wien2k, AbInit, SIESTA) and a phonon code (such as Phonopy or Phon). The workflow is the following. Molecular dynamics (MD) in a supercell at a given temperature T is performed using another code. After sufficient equilibration, the output in the form of atomic positions and forces for a large number of selected MD steps is recorded into a file. If needed, one can modify this file by applying additional constraints, such as enforced crystal symmetry or subtracted motion of the center of mass. ThermoPhonon reads the file with atomic positions and forces and writes a new file with the force constants. Force constants can be used by another code (such as Phonopy or Phon) to produce phonon spectrum for plotting, in the assumption of known equilibrium atomic positions provided in a separate file.

Zarkevich, Nikolai↗