Engineering Papers⌕ Search

Engineering topics

Zanetti, M.

Publications and source records attributed to Zanetti, M..

Constraining Impact Melt Volumes in Young Simple Lunar Craters

Impact cratering is the most ubiquitous geomorphological phenomenon in the solar system. Ponds of once molten material often occupy the bottoms of lunar craters. The melt was originally produced during the intense heat and pressure of impact, and has the potential to give us insight into the physics of impact cratering, as well as potentially encoding information about the materials comprising impacted surfaces. Here, we seek to define a methodology capable of placing an upper bound on simple lunar impact crater melt volumes using Lunar Reconnaissance Orbiter NAC and Kaguya Terrain Camera digital terrain models (DTMs). One prediction we seek to test is that melt production increases with porosity of impacted materials. Previous research suggests impact craters in the more porous, anorthositic highlands contain impact melt ponds of greater volume than those in less porous basaltic maria in craters of comparable diameters.

Chandra, R.↗

Spatial Variation in Erosion Rates in Mars Equatorial Regions Inferred from Ejecta Retention of 1-3 Km Diameter Craters

The modification of impact craters has long been used to infer the geomorphic forcing on Mars [1], as well as estimate the spatial and temporal variability of this erosion and gradation [e.g., 2]. Here, we studied the population of small primary craters (1-3 km) to understand differences in ejecta retention across equatorial Mars. Specifically, we evaluated whether craters in our study population had observable ejecta deposits (defined on the basis of distinct tone or texture with respect to their surroundings).This is a proxy for the resurfacing rate because only relatively fresh craters retain their ejecta deposits. More broadly, this is part of a larger project we are undertaking [3] to examine crater morphometry and other characteristics from CTX-derived digital terrain models (DTMs), augmented by qualitative observations.

Fassett, C. I.↗

Gully Formation at the Haughton Impact Structure (Arctic Canada) Through the Melting of Snow and Ground Ice, with Implications for Gully Formation on Mars

The formation of gullies on Mars has been the topic of active debate and scientific study since their first discovery by Malin and Edgett in 2000. Several mechanisms have been proposed to account for gully formation on Mars, from “dry” mass movement processes, release of water or brine from subsurface aquifers, and the melting of near-surface ground ice or snowpacks. In their global documentation of martian gullies, report that gullies are confined to ~27–83°S and ~28–72°N latitudes and span all longitudes. Gullies on Mars have been documented on impact crater walls and central uplifts, isolated massifs, and on canyon walls, with crater walls being the most common situation. In order to better understand gully formation on Mars, we have been conducting field studies in the Canadian High Arctic over the past several summers, most recently in summer 2018 and 2019 under the auspices of the Canadian Space Agency-funded Icy Mars Analogue Program. It is notable that the majority of previous studies in the Arctic and Antarctica, including our recent work on Devon Island, have focused on gullies formed on slopes generated by regular endogenic geological processes and in “regular” bedrock. How-ever, as noted above, meteorite impact craters are the most dominant setting for gullies on Mars. Impact craters provide an environment with diverse lithologies – including impact-generated and impact-modified rocks – and slope angle, and thus greatly variable hill slope processes could occur within a localized area. Here, we investigate the formation of gullies within the Haughton impact structure and compare them to gullies formed in unimpacted target rock in the nearby Thomas Lee Inlet

Osinski, G. R.↗

LEP3: A High Luminosity $e^+e^-$ Collider to Study the Higgs Boson

A strong candidate for the Standard Model Scalar boson, H(126), has been discovered by the Large Hadron Collider (LHC) experiments. In order to study this fundamental particle with unprecedented precision, and to perform precision tests of the closure of the Standard Model, we investigate the possibilities offered by An e+e- storage ring collider. We use a design inspired by the B-factories, taking into account the performance achieved at LEP2, and imposing a synchrotron radiation power limit of 100 MW. At the most relevant centre-of-mass energy of 240 GeV, near-constant luminosities of 10^34 cm^{-2}s^{-1} are possible in up to four collision points for a ring of 27km circumference. The achievable luminosity increases with the bending radius, and for 80km circumference, a luminosity of 5 10^34 cm^{-2}s^{-1} in four collision points appears feasible. Beamstrahlung becomes relevant at these high luminosities, leading to a design requirement of large momentum acceptance both in the accelerating system and in the optics. The larger machine could reach the top quark threshold, would yield luminosities per interaction point of 10^36 cm^{-2}s^{-1} at the Z pole (91 GeV) and 2 10^35 cm^{-2}s^{-1} at the W pair production threshold (80 GeV per beam). The energy spread is reduced in the larger ring with respect to what is was at LEP, giving confidence that beam polarization for energy calibration purposes should be available up to the W pair threshold. The capabilities in term of physics performance are outlined.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The CMS Online Cluster: IT for a Large Data Acquisition and Control Cluster

The CMS online cluster consists of more than 2000 computers running about 10000 application instances. These applications implement the control of the experiment, the event building, the high level trigger, the online database and the control of t he buffering and transferring of data to the Central Data Recording at CERN. In this paper the IT solutions employed to fulfil the requirements of such a large cluster are revised. Details are given on the chosen network structure, configuration managemen t system, monitoring infrastructure and on the implementation of the high availability for the services and infrastructure.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The CMS Data Acquisition System Software

The CMS data acquisition system is made of two major subsystems: event building and event filter. The presented paper describes the architecture and design of the software that processes the data flow in the currently operating experiment. The cen tral DAQ system relies on industry standard networks and processing equipment. Adopting a single software infrastructure in all subsystems of the experiment imposes, however, a number of different requirements. High efficiency and configuration flexibilit y are among the most important ones. The XDAQ software infrastructure has matured over an eight years development and testing period and has shown to be able to cope well with the requirements of the CMS experiment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Monitoring the CMS Data Acquisition System

The CMS data acquisition system comprises O(20000) interdependent services that need to be monitored in near real-time. The ability to monitor a large number of distributed applications accurately and effectively is of paramount importance for rob ust operations. Application monitoring entails the collection of a large number of simple and composed values made available by the software components and hardware devices. A key aspect is that detection of deviations from a specified behaviour is suppor ted in a timely manner, which is a prerequisite in order to take corrective actions efficiently. Given the size and time constraints of the CMS data acquisition system, efficient application monitoring is an interesting research problem. We propose an app roach that uses the emerging paradigm of Web-service based eventing systems in combination with hierarchical data collection and load balancing. Scalability and efficiency are achieved by a decentralized architecture, splitting up data collections into re gions of collections. An implementation following this scheme is deployed as the monitoring infrastructure of the CMS experiment at the Large Hadron Collider. All services in this distributed data acquisition system are providing standard web service inte rfaces via XML, SOAP and HTTP [15,22]. Continuing on this path we adopted WS-* standards implementing a monitoring system layered on top of the W3C standards stack. We designed a load-balanced publisher/subscriber system with the ability to include high-s peed protocols [10,12] for efficient data transmission [11,13,14] and serving data in multiple data formats.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗