Engineering Papers⌕ Search

Engineering topics

Yu, Zongfu

Publications and source records attributed to Yu, Zongfu.

At least 19 records

Compact hyperspectral spectrometers based on semiconductor nanomembranes

Hyperspectral resonant cavity imaging spectrometers and imaging systems incorporating the resonant cavity spectrometers are provided. The spectrometers include an array of photodetectors based on photosensitive semiconductor nanomembranes disposed between two dielectric spacers, each of the dielectric spacers having a thickness gradient along a lateral direction, such that the resonant cavity height differs for different photodetectors in the array.

Ma, Zhenqiang↗

Nonreciprocal Thermal Emitters Using Metasurfaces with Multiple Diffraction Channels

The emissivity and absorptivity of nonreciprocal thermal emitters are not constrained by the well-known Kirchhoff law of thermal radiation, which usually serves as the theoretical basis to characterize thermal properties. When thermal emitters are nondiffracting, which is the case in previous studies of nonreciprocal thermal emitters, the angular distribution of emissivity and absorptivity is mirror symmetric with respect to the normal direction, and the nonreciprocal effect is confined to a relatively narrow angular range. In this work, we consider nonreciprocal thermal emitters that can simultaneously couple to multiple diffraction channels. We show that the symmetry relation between absorptivity and emissivity can be broken in such multichannel emitters. The angular range in which the nonreciprocal effect is strong can also be significantly broadened. Such multichannel emitters can operate as one-way energy splitters. Our work significantly broadens the flexibility of thermal-radiation control in nonreciprocal thermal-emitter design.

42 ENGINEERING↗

Spatially resolved x-ray detection with photonic crystal scintillators

We study the self-collimation phenomenon in photonic crystals (PhC) of wide bandgap materials for ultra-fast and high spatial resolution x-ray detection. We work on various heavy inorganic scintillators: BaF 2 , GaN, ZnO, CsI:Tl, NaI:Tl, LYSO, WO 4 compounds, and plastic scintillators. Conventional scintillator detectors do not rely on a direct detection mechanism; hence, they require intricate design and fabrication processes. We offer a PhC design to observe self-collimation phenomena and overcome the ongoing spatial resolution challenges with these types of materials. We investigate the photonic band diagrams and iso-frequency contours. Fourier transforms based on finite-difference time-domain and frequency domain simulations are done for verifying and analyzing the self-collimation with the selected material. Light extraction efficiency at the PhC–air interface, depending on the truncation distance from the excitation point, is measured. Beam divergence values are calculated at 1 mm propagation distance. The vertical field profiles are obtained to observe the confinement. For the spatial resolution analysis, cross-sectional beam profiles have been examined. Furthermore, Gaussian envelopes are fitted to beam profiles for a consistent data analysis, and full-width-at-half-maximum values are considered. As a result, we theoretically prove and demonstrate the spatially resolved x-ray detection at the sub-micrometer level for a wide range of scintillator materials.

36 MATERIALS SCIENCE↗

Wavefront detector

A wavefront sensor system suitable for integration into an integrated circuit light detector may provide for wave angle sensors having varying functional relationships between the wave angle and signal to provide improved dynamic range. These wave angle sensors may be combined with integrated circuit phase angle sensors for a more complete analysis of the waveform.

Yu, Zongfu↗

Wavefront detector

A wavefront sensor system suitable for integration into an integrated circuit light detector may provide for wave angle sensors having varying functional relationships between the wave angle and signal to provide improved dynamic range. These wave angle sensors may be combined with integrated circuit phase angle sensors for a more complete analysis of the waveform.

42 ENGINEERING↗

Single-shot on-chip spectral sensors based on photonic crystal slabs

Miniaturized spectrometers have significant potential for portable applications such as consumer electronics, health care, and manufacturing. These applications demand low cost and high spectral resolution, and are best enabled by single-shot free-space-coupled spectrometers that also have sufficient spatial resolution. Here, we demonstrate an on-chip spectrometer that can satisfy all of these requirements. Our device uses arrays of photodetectors, each of which has a unique responsivity with rich spectral features. These responsivities are created by complex optical interference in photonic-crystal slabs positioned immediately on top of the photodetector pixels. The spectrometer is completely complementary metal–oxide–semiconductor (CMOS) compatible and can be mass produced at low cost.

42 ENGINEERING↗

High-sensitivity silicon ultraviolet p+-i-n avalanche photodiode using ultra-shallow boron gradient doping

Photo detection of ultraviolet (UV) light remains a challenge since the penetration depth of UV light is limited to the nanometer scale. Therefore, the doping profile and electric field in the top nanometer range of the photo detection devices become critical. Traditional UV photodetectors usually use a constant doping profile near the semiconductor surface, resulting in a negligible electric field, which limits the photo-generated carrier collection efficiency of the photodetector. Here, we demonstrate, via the use of an optimized gradient boron doping technique, that the carrier collection efficiency and photo responsivity under the UV wavelength region have been enhanced. Moreover, the ultrathin p+-i-n junction shows an avalanche gain of 2800 and an ultra-low junction capacitance (sub pico-farad), indicating potential applications in the low timing jitter single photon detection area.

36 MATERIALS SCIENCE↗

Single-crystalline germanium nanomembrane photodetectors on foreign nanocavities

Miniaturization of optoelectronic devices offers tremendous performance gain. As the volume of photoactive material decreases, optoelectronic performance improves, including the operation speed, the signal-to-noise ratio, and the internal quantum efficiency. Over the past decades, researchers have managed to reduce the volume of photoactive materials in solar cells and photodetectors by orders of magnitude. However, two issues arise when one continues to thin down the photoactive layers to the nanometer scale (for example, <50 nm). First, light-matter interaction becomes weak, resulting in incomplete photon absorption and low quantum efficiency. Second, it is difficult to obtain ultrathin materials with single-crystalline quality. We introduce a method to overcome these two challenges simultaneously. It uses conventional bulk semiconductor wafers, such as Si, Ge, and GaAs, to realize single-crystalline films on foreign substrates that are designed for enhanced light-matter interaction. We use a high-yield and high-throughput method to demonstrate nanometer-thin photodetectors with significantly enhanced light absorption based on nanocavity interference mechanism. As a result, these single-crystalline nanomembrane photodetectors also exhibit unique optoelectronic properties, such as the strong field effect and spectral selectivity.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photon management with index-near-zero materials

Index-near-zero materials can be used for effective photon management. They help to restrict the angle of acceptance, resulting in greatly enhanced light trapping limit. In addition, these materials also decrease the radiative recombination, leading to enhanced open circuit voltage and energy efficiency in direct bandgap solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Flexible germanium nanomembrane metal-semiconductor-metal photodiodes

We demonstrate flexible Ge nanomembrane (Ge NM) based metal-semiconductor-metal photodiodes. The effect of uniaxial tensile strain on Ge NM based photodiodes was investigated using bending fixtures. Dark current density is decreased from 21.5 to 4.8 mA/cm{sup 2} at 3 V by a tensile strain of 0.42% while photon responsivity is increased from 0.2 to 0.45 A/W at the wavelength of 1.5 μm. Enhanced responsivity is also observed at longer wavelengths up to 1.64 μm. The uniaxial tensile strain effectively reduces the direct bandgap energy of the Ge NM, leading to a shift of the absorption edge toward a longer wavelength.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analog of superradiant emission in thermal emitters

When wave effects of thermal photons become significant, thermal emitters can exhibit intriguing coherent effects. Here in this paper, we show that the superradiant emission, which was originally found in quantum emitters, can be realized in resonant thermal emitters. Similar to the superradiance in quantum emitters, the in-phase oscillation of resonant emitters reduces the lifetime of thermal photons in the emitters. Unlike the atomic superradiance, one remarkable consequence of the thermal superradiance is the anomalous power scaling, where the emission power can scale inversely with the number of thermal emitters. More thermal emitters generate less power due to the coherent interference of thermal photons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunneling-enabled spectrally selective thermal emitter based on flat metallic films

Infrared thermal emission from metals has important energy applications in thermophotovoltaics, radiative cooling, and lighting. The emissivity of flat metal films is close to zero because the screening effect prevents metals' fluctuating currents from emitting to the far field. As a result, metal films are often used as reflecting mirrors instead of thermal emitters. Recently, nanostructured metals, such as metamaterials, have emerged as an interesting way to enhance and to spectrally control thermal emission based on plasmonic resonant effects. However, they require sophisticated lithography. Here, we proposed and experimentally demonstrated a completely different mechanism to achieve spectrally selective metallic emitters based on atunneling effect. Furthermore, this effect allows a simple flat metal film to achieve a near-unity emissivity with controlled spectral selectivity for efficient heat-to-light energy conversion.

36 MATERIALS SCIENCE↗

Optoelectronic semiconductor device and method of fabrication

An optoelectronic device comprising an optically active layer that includes a plurality of domes is presented. The plurality of domes is arrayed in two dimensions having a periodicity in each dimension that is less than or comparable with the shortest wavelength in a spectral range of interest. By virtue of the plurality of domes, the optoelectronic device achieves high performance. A solar cell having high energy-conversion efficiency, improved absorption over the spectral range of interest, and an improved acceptance angle is presented as an exemplary device.

14 SOLAR ENERGY↗