Engineering Papers⌕ Search

Engineering topics

Yu, S

Publications and source records attributed to Yu, S.

31 records · Page 2

ELECTRON-BEAM-INDUCED RADIO EMISSION FROM ULTRACOOL DWARFS

We present the numerical simulations for an electron-beam-driven and loss-cone-driven electron-cyclotron maser (ECM) with different plasma parameters and different magnetic field strengths for a relatively small region and short timescale in an attempt to interpret the recent discovered intense radio emission from ultracool dwarfs. We find that a large amount of electromagnetic (EM) field energy can be effectively released from the beam-driven ECM, which rapidly heats the surrounding plasma. A rapidly developed high-energy tail of electrons in velocity space (resulting from the heating process of the ECM) may produce the radio continuum depending on the initial strength of the external magnetic field and the electron beam current. Both significant linear polarization and circular polarization of EM waves can be obtained from the simulations. The spectral energy distributions of the simulated radio waves show that harmonics may appear from 10 to 70{nu}{sub pe} ({nu}{sub pe} is the electron plasma frequency) in the non-relativistic case and from 10 to 600{nu}{sub pe} in the relativistic case, which makes it difficult to find the fundamental cyclotron frequency in the observed radio frequencies. A wide frequency band should therefore be covered by future radio observations.

79 ASTRONOMY AND ASTROPHYSICS↗

COMPARATIVE ANALYSIS OF TWO FORMATION SCENARIOS OF BURSTY RADIO EMISSION FROM ULTRACOOL DWARFS

Recently, a number of ultracool dwarfs have been found to produce periodic radio bursts with high brightness temperature and polarization degree; the emission properties are similar to the auroral radio emissions of the magnetized planets of the solar system. We simulate the dynamic spectra of radio emission from ultracool dwarfs. The emission is assumed to be generated due to the electron-cyclotron maser instability. We consider two source models: the emission caused by interaction with a satellite and the emission from a narrow sector of active longitudes; the stellar magnetic field is modeled by a tilted dipole. We have found that for the dwarf TVLM 513-46546, the model of the satellite-induced emission is inconsistent with observations. On the other hand, the model of emission from an active sector is able to reproduce qualitatively the main features of the radio light curves of this dwarf; the magnetic dipole seems to be highly tilted (by about 60 Degree-Sign ) with respect to the rotation axis.

79 ASTRONOMY AND ASTROPHYSICS↗

An Experimental Exploration of Chemical Bond Characteristic Bulk Modulus and Phase Stability in ZnO: Cu Nanocrystals under High Pressure

The high pressure induced phase transitions in Zn{sub 1-x} Cu{sub x} O (x = 0.005 and 0.011) are investigated by angle-dispersive synchrotron radiation X-ray diffraction. As the pressure increases, phase transformations from the wurtzite structure to the rocksalt structure are observed in both samples, with the transition pressures at 9.8 GPa and 7.9 GPa, respectively. With the increasing of the Cu-doping concentration in ZnO, crystalline parameters, the bulk moduli, and the Zn-O bond lengths all increased, meanwhile, the transition pressures decreased. The results could be explained in terms of the reduction of phase transformation barriers and the lowering of bond energy.

36 MATERIALS SCIENCE↗

The Study of Structural Transition of ZnS Nanorods under High Pressure

The study of pressure behavior for ZnS nanorods by X-ray diffraction measurements up to 37.2 GPa is carried out. ZnS nanorods transform from the initial wurtzite phase to rock salt phase at 19.6 GPa without undergoing the transition to zinc blende structure, and this is the first report about the direct phase transition from wurtzite to rock salt phase for ZnS. The longitudinal c-axis of ZnS nanorods exhibits more compressible behavior than that of radial a-axis direction, which is caused by the special rod morphology, and this induces the special direct phase transition to rock salt phase without zinc blende phase in the transition process. The results show the morphology of ZnS nanorods plays a crucial role in the special pressure behavior and also suggests we could explore the various pressure behaviors applying particular shaped nanomaterials under high pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoelectron Spectroscopy of U Oxide at LLNL

In our laboratory at LLNL, an effort is underway to investigate the underlying complexity of 5f electronic structure with spin-resolved photoelectron spectroscopy using chiral photonic excitation, i.e. Fano Spectroscopy. Our previous Fano measurements with Ce indicate the efficacy of this approach and theoretical calculations and spectral simulations suggest that Fano Spectroscopy may resolve the controversy concerning Pu electronic structure and electron correlation. To this end, we have constructed and commissioned a new Fano Spectrometer, testing it with the relativistic 5d system Pt. Here, our preliminary photoelectron spectra of the UO{sub 2} system are presented. X-ray photoelectron spectroscopy has been used to characterize a sample of UO{sub 2} grown on an underlying substrate of Uranium. Both AlK{alpha} (1487 eV) and MgK{alpha} (1254 eV) emission were utilized as the excitation. Using XPS and comparing to reference spectra, it has been shown that our sample is clearly UO{sub 2}.

36 MATERIALS SCIENCE↗

High-pressure crystal growth and magnetic and electrical properties of the quasi-one dimensional osmium oxide Na{sub 2}OsO{sub 4}

Na{sub 2}OsO{sub 4} crystals were grown by a NaCl flux method under high pressure. It crystallizes in the Ca{sub 2}IrO{sub 4}-type structure without having additional elements or metal vacancies, which are usually accommodated. It appears that Na{sub 2}OsO{sub 4} is a metal-stoichiometric Ca{sub 2}IrO{sub 4}-type compound never been synthesized to date. Na{sub 2}OsO{sub 4} has the octahedral environment of Os{sup 6+}O{sub 6} so that the electronic configuration is 5d{sup 2}, suggesting the magnetic S=1 ground state. However, magnetization, electrical resistivity, and specific heat measurements indicated that the non-magnetic S=0 state is much likely for Na{sub 2}OsO{sub 4} than the S=1 state. Band structure calculations and the structure analysis found that the disagreement is probably due to the statically uniaxial compression of the OsO{sub 6} octahedra, resulting in splitting of the t{sub 2{sub g}} band. - Graphical abstract: Na{sub 2}OsO{sub 4} crystals were grown by a NaCl flux method under high pressure. It crystallizes in the Ca{sub 2}IrO{sub 4}-type structure comprising infinite Os{sup 6+}O{sub 6} octahedra (5d{sup 2}) chains. The crystal growth, the crystal structure, and the magnetic and electrical properties are reported.

36 MATERIALS SCIENCE↗

Synchrotron X-ray Diffraction and Infrared Spectroscopy Studies of C60H18 Under High Pressure

In situ high-pressure angle-dispersive synchrotron X-ray diffraction and high-pressure mid-infrared (IR) spectrum measurements of C{sub 60}H{sub 18} were carried out up to 32 and 10.2 GPa, respectively. Our diffraction data indicated that the fcc structure of C{sub 60}H{sub 18} was stable up to 32 GPa. The bulk modulus B{sub 0} was determined to be 21 {+-} 1.16 GPa, about 40% higher than that of C{sub 60}. The C-H vibrations still existed up to 10.2 GPa, and the vibrational frequencies decreased with increasing pressure. IR-active vibrational frequencies and their corresponding eigenvectors of C{sub 60}H{sub 18} were simulated by DMOL{sup 3}. The effects of the hydrogen atoms attached to the fullerene molecular cage on the stability of the structure under high pressure are discussed.

08 HYDROGEN↗

Investigations of Magnetic Overlayers at the Advanced Photon Source

Magnetic overlayers of Fe and Co have been investigated with X-ray Magnetic Circular Dichroism in X-ray Absorption Spectroscopy (XMCD-ABS) and Photoelectron Spectroscopy (PES), including Spin-Resolved Photoelectron Spectroscopy (SRPES), at Beamline 4 at the Advanced Photon Source (APS). Particular emphasis was placed upon the interrogation of the 2p levels of the Fe.

36 MATERIALS SCIENCE↗

Narrowing the Range of Possible Solutions to the Pu Electronic Structure Problem: Developing a New Bremstrahlung Isohromat Spectroscopy Capability

Bremstrahlung Isochromat Spectroscopy (BIS) has a proven record for the probing of unoccupied electronic structure, including feasibility studies of actinides such as U and Th. A description of the BIS or Inverse Photoelectron Spectroscopy (IPES) process and of our reasoning concerning the potential importance of extending the application of BIS related techniques to the actinides, will be provided. To put this into the proper context, our past successes, using soft x-ray techniques to interrogate the electronic structure of Pu, will be briefly reviewed. Finally, the initial results of the calibration of the BIS device, including preliminary spectra from of the surrogate system CeOxide, will be presented.

36 MATERIALS SCIENCE↗

The Spectroscopic Signature of Aging in (delta)-Pu(Ga)

The electronic structure of Pu is briefly discussed, with emphasis upon Aging effects. Photoelectron Spectroscopy and X-ray Absorption Spectroscopy have contributed greatly to our improved understanding of Pu electronic structure. (See Figure 1.) From these and related measurements, the following has been determined: (1) The Pu 5f spin-orbit splitting is large; (2) The number of Pu5f electrons is 5; and (3) The Pu 5f spin-orbit splitting effect dominates 5f itineracy.

36 MATERIALS SCIENCE↗

DARHT 2 kA Cathode Development

In the campaign to achieve 2 kA of electron beam current, we have made several changes to the DARHT-II injector during 2006-2007. These changes resulted in a significant increase in the beam current, achieving the 2 kA milestone. Until recently (before 2007), the maximum beam current that was produced from the 6.5-inch diameter (612M) cathode was about 1300 A when the cathode was operating at a maximum temperature of 1140 C. At this temperature level, the heat loss was dominated by radiation which is proportional to temperature to the fourth power. The maximum operating temperature was limited by the damage threshold of the potted filament and the capacity of the filament heater power supply, as well as the shortening of the cathode life time. There were also signs of overheating at other components in the cathode assembly. Thus it was clear that our approach to increase beam current could not be simply trying to run at a higher temperature and the preferred way was to operate with a cathode that has a lower work function. The dispenser cathode initially used was the type 612M made by SpectraMat. According to the manufacturer's bulletin, this cathode should be able to produce more than 10 A/cm{sup 2} of current density (corresponding to 2 kA of total beam current) at our operating conditions. Instead the measured emission (space charge limited) was 6 A/cm{sup 2}. The result was similar even after we had revised the activation and handling procedures to adhere more closely to the recommend steps (taking longer time and nonstop to do the out-gassing). Vacuum was a major concern in considering the cathode's performance. Although the vacuum gauges at the injector vessel indicated 10{sup -8} Torr, the actual vacuum condition near the cathode in the central region of the vessel, where there might be significant out-gassing from the heater region, was never determined. Poor vacuum at the surface of the cathode degraded the emission (by raising the work function value). We reexamined all the components in the cathode region and eliminated those parts that were suspected to be potential sources of contamination, e.g., feed-throughs with zinc coating. Finally, we considered a change in the cathode type, by using a different combination of impregnation and coating. Since the ETA-II accelerator at LLNL used a 12.5 cm diameter 311XW (barium oxide doped with scandium and coated with a osmium-tungsten thin film) cathode and emitted 2200A of beam current (i.e. 18 A/cm{sup 2}), it was reasonable to assume that DARHT can adopt this type of cathode to produce 2 kA (i.e., 10A/cm{sup 2}). However, it was later found that the 311XW has a higher radiation heat loss than the 612M and therefore resulted in a maximum operating temperature (as limited by filament damage) below that required to produce the high current. With the evidence provided by systematic emission tests using quarter-inch size cathodes, we confirmed that the 311XM (doped with scandium and has a osmium-ruthenium (M) coating) had the best combination of low work function and low radiation heat loss. Subsequently a 6.5-inch diameter 311XM cathode was installed in DARHT and 2 kA beam current was obtained on June 14, 2007. In testing the quarter-inch size cathode, we found that the beam current was sensitive to the partial pressure of various gases in the vacuum chamber. Furthermore, there was a hysteresis effect on the emission as a function of temperature. The phenomenon suggested that the work function of the cathode was dependent on the dynamic equilibrium between the diffusion of the impregnated material to the surface and the contamination rate from the surrounding gas. Water vapor was found to be the worst contaminant amongst the various gases that we have tested. Our data showed that the required vacuum for emitting at 10 A/cm{sup 2} is in the low 10{sup -8} Torr range.

25 ENERGY STORAGE↗

High-Pressure Structural Transitions of Sc2O3 by X-ray Diffraction, Raman Spectra, and Ab Initio Calculations

The high-pressure behavior of scandium oxide (Sc2O3) has been investigated by angle-dispersive synchrotron powder X-ray diffraction and Raman spectroscopy techniques in a diamond anvil cell up to 46.2 and 42 GPa, respectively. An irreversible structural transformation of Sc2O3 from the cubic phase to a monoclinic high-pressure phase was observed at 36 GPa. Subsequent ab initio calculations for Sc2O3 predicted the phase transition from the cubic to monoclinic phase but at a much lower pressure. The same calculations predicted a second phase transition at 77 GPa from the monoclinic to hexagonal phase.

43 PARTICLE ACCELERATORS↗

Continuous metal-insulator transition of the antiferromagnetic perovskite NaOsO{sub 3}.

The perovskite NaOsO{sub 3} shows a Curie-Weiss metallic nature at high temperature and suddenly goes into an antiferromagnetically insulating state at 410 K on cooling. Electronic specific heat at the low-temperature limit is absent, indicating that the band gap fully opens. In situ observation in electron microscopy undetected any lattice anomalies in the vicinity of the transition temperature. It is most likely that the antiferromagnetic correlation plays an essential role in the gap opening.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗