Evaluation of targeting αVβ3 in breast cancers using RGD peptide-based agents
Not provided.
Radiology, Nuclear Medicine & Medical Imaging↗
Engineering topics
Yu, Jing
Publications and source records attributed to Yu, Jing.
Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): Assessment and modeling of crack characteristics
Highlights: • A probabilistic model was proposed to model the crack width evolution of SS-ECC at different strain levels. • The Weibull distribution fit the crack width distribution better than the log-normal distribution. • A 5-D representation was proposed to assess the SS-ECC by considering both cracking and mechanical performance. • Larger sea-sand size and lower fiber dosage led to larger crack widths in SS-ECC under the same tensile strain. • 18-mm PE fiber led to larger crack widths in SS-ECC at strain >2%, due to a large fraction of fiber rupture. Seawater sea-sand Engineered Cementitious Composites (SS-ECC) is a new version of ECC for marine constructions facing the scarcity of freshwater and river/manufactured sand. This study aims to assess and model the crack characteristics of SS-ECC, which are critical for its applications with non-corrosive reinforcements. The influence of sea-sand size, fiber length and fiber dosage on the crack characteristics of SS-ECC was explored. A five-dimensional representation was proposed to assess the overall performance of SS-ECC, by comprehensively considering both the crack characteristics (i.e., crack width and its variation) and the mechanical properties (i.e., compressive and tensile properties). A probabilistic model was also proposed to describe the stochastic nature and evolution of crack width, and it can be used to estimate the critical tensile strain on SS-ECC for a given crack-width limit and cumulative probability. The findings and proposed methods can facilitate the design of SS-ECC in marine and coastal structures.
36 MATERIALS SCIENCE↗
Schizophrenia-related microdeletion causes defective ciliary motility and brain ventricle enlargement via microRNA-dependent mechanisms in mice
Progressive ventricular enlargement, a key feature of several neurologic and psychiatric diseases, is mediated by unknown mechanisms. Here, using murine models of 22q11-deletion syndrome (22q11DS), which is associated with schizophrenia in humans, we found progressive enlargement of lateral and third ventricles and deceleration of ciliary beating on ependymal cells lining the ventricular walls. The cilia-beating deficit observed in brain slices and in vivo is caused by elevated levels of dopamine receptors (Drd1), which are expressed in motile cilia. Haploinsufficiency of the microRNA-processing gene Dgcr8 results in Drd1 elevation, which is brought about by a reduction in Drd1-targeting microRNAs miR-382-3p and miR-674-3p. Replenishing either microRNA in 22q11DS mice normalizes ciliary beating and ventricular size. Knocking down the microRNAs or deleting their seed sites on Drd1 mimicked the cilia-beating and ventricular deficits. These results suggest that the Dgcr8–miR-382-3p/miR-674-3p–Drd1 mechanism contributes to deceleration of ciliary motility and age-dependent ventricular enlargement in 22q11DS.
59 BASIC BIOLOGICAL SCIENCES↗
Discontinuous micro-fibers as intrinsic reinforcement for ductile Engineered Cementitious Composites (ECC)
Engineered Cementitious Composites (ECC) have demonstrated superior mechanical and durability performance than conventional concrete. In the micromechanical reinforcing system of ECC, fibers play a pivotal role in establishing the ultrahigh tensile ductility and autogenous crack width control. This article reviews the state-of-the-art of discontinuous micro-fibers as intrinsic reinforcement of ECC regarding technical performance as well as environmental and economic impacts. Mechanical properties of ECC made with different micro-fibers, man-made or natural, and their embodied energy, emissions and material cost, are comprehensively surveyed. Further, studies on fiber hybridization are discussed regarding the combination of different types of fibers to form synergetic reinforcements that mitigate total material cost, and potentially enhance the composite performance. Lastly, recommendations on fiber selections are highlighted and directions for future research are suggested.
42 ENGINEERING↗
Structure and dynamics of lipid membranes interacting with antivirulence end-phosphorylated polyethylene glycol block copolymers
The structure and dynamics of lipid membranes in the presence of extracellular macromolecules are critical for cell membrane functions and many pharmaceutical applications. The pathogen virulence-suppressing end-phosphorylated polyethylene glycol (PEG) triblock copolymer (Pi-ABAPEG) markedly changes the interactions with lipid vesicle membranes and prevents PEG-induced vesicle phase separation in contrast to the unphosphorylated copolymer (ABAPEG). Pi-ABAPEG weakly absorbs on the surface of lipid vesicle membranes and slightly changes the structure of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) unilamellar vesicles at 37 °C, as evidenced by small angle neutron scattering. X-ray reflectivity measurements confirm the weak adsorption of Pi-ABAPEG on DMPC monolayer, resulting in a more compact DMPC monolayer structure. Neutron spin-echo results show that the adsorption of Pi-ABAPEG on DMPC vesicle membranes increases the membrane bending modulus $κ$.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Structure and Magnetic Properties of the Ti-Doped Pyrochlore Molybdate Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7}
The structural, heat capacity, and magnetic properties of Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} were investigated in this work. Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} maintains the pyrochlore structure, but lattice constants are observed to decrease continuously with the Ti{sup 4+} doping. The magnetic measurements indicate a magnetic phase transition at low temperature for all Ti-doped samples, and the Ti{sup 4+} doping suppresses the transition temperature. This is ascribed to the diluted effect of nonmagnetic Ti{sup 4+} substitution of magnetic Mo{sup 4+}. The heat capacity data confirm that the low-temperature magnetic phase is spin glass in the Ti{sup 4+}-doped Y{sub 2}Mo{sub 2(1-x)}Ti{sub 2x}O{sub 7} system. The M(H) data reveals the coexistence of antiferromagnetic and ferromagnetic interactions at low temperatures.
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Second messenger Ap 4 A polymerizes target protein HINT1 to transduce signals in FcεRI-activated mast cells
Signal transduction systems enable organisms to monitor their external environments and accordingly adjust the cellular processes. In mast cells, the second messenger Ap 4 A binds to the histidine triad nucleotide-binding protein 1 (HINT1), disrupts its interaction with the microphthalmia-associated transcription factor (MITF), and eventually activates the transcription of genes downstream of MITF in response to immunostimulation. How the HINT1 protein recognizes and is regulated by Ap 4 A remain unclear. Here, using eight crystal structures, biochemical experiments, negative stain electron microscopy, and cellular experiments, we report that Ap 4 A specifically polymerizes HINT1 in solution and in activated rat basophilic leukemia cells. The polymerization interface overlaps with the area on HINT1 for MITF interaction, suggesting a possible competitive mechanism to release MITF for transcriptional activation. The mechanism depends precisely on the length of the phosphodiester linkage of Ap 4 A. These results highlight a direct polymerization signaling mechanism by the second messenger.
59 BASIC BIOLOGICAL SCIENCES↗
Multidimensional sum-up rounding for integer programming in optimal experimental design
Here we present a numerical method for approximating the solution of convex integer programs stemming from optimal experimental design. The statistical setup consists of a Bayesian framework for linear inverse problems for which the direct relationship is described by a discretized integral equation. Specifically, we aim to find the optimal sensor placement from a set of candidate locations where data are collected with measurement error. The convex objective function is a measure of the uncertainty, described here by the trace or log-determinant of the posterior covariance matrix, for the discretized linear inverse problem solution. The resulting convex integer program is relaxed, producing a lower bound. An upper bound is obtained by extending the sum-up rounding approach to multiple dimensions. For this extension, we analyze its accuracy as a function of the discretization mesh size for a rectangular domain. We show asymptotic optimality of the integer solution defining the upper bound for different experimental design criteria (A- and D-optimal), by proving the convergence to zero of the gap between the upper and lower bounds as the mesh size goes to zero. The technique is illustrated on a two-dimensional gravity surveying problem for both A-optimal and D-optimal sensor placement where our designs yield better results compared with a thresholding rounding approach.
97 MATHEMATICS AND COMPUTING↗
Ion-Specific Effects of Divalent Ions on the Structure of Polyelectrolyte Brushes
Polyelectrolyte brushes consist of charged polymer chains attached on one end to a surface at high densities. They are relevant for many practical applications ranging from biosensors to drug delivery to colloidal stability. Their structure and functionality can be dramatically influenced by multivalent counterions in the solution environment. In this work, the surface forces apparatus (SFA) and atomic force microscopy (AFM) were used to investigate the effects of three alkaline earth divalent cations, Mg 2+ , Ca 2+ , and Ba 2+ , on the structures of polystyrenesulfonate (PSS) brushes tethered to mica and silicon oxide surfaces. While all these ions caused significant shrinkage of the height of the PSS brushes, strong ion-specific effects were observed. Mg 2+ and C 2+ , caused homogeneous shrinkage; Ba 2+ led to pinned-micelle like inhomogeneous structures. Isothermal titration calorimetry (ITC) demonstrated that this ion specificity was mainly caused by the difference in binding energy between sulfonate groups and the divalent cations. Considering the abundance of divalent cations in industrial processes, natural environments, and biological systems, the understanding of strong ion-specific effects of divalent counterions is of great importance for theoretical studies and various applications involving polyelectrolytes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Influence of Particle Size on the Spin Pinning Effect in the fcc-FePt Nanoparticles
In this work, the Fe{sub 60}Pt{sub 40} nanoparticles were synthesized through the chemical reduction method by using the Fe(CO){sub 5} and the Pt(acac){sub 2} as the metallic precursor. The particle size of the synthesized FePt nanoparticles was controlled by adjusting the reaction conditions involving of the Fe(CO){sub 5}-injecting temperature and the soak time of reaction. The structure, morphology, and magnetic properties of the synthesized FePt nanoparticles were characterized by XRD, TEM, and vibrating sample magnetometer (VSM), respectively. The synthesized nanoparticles exhibit uniform size and good dispersity. The magnetization behaviors indicate that the nanoparticles present the core-shell magnetic structure including the ferromagnetic core part and the spin-disorder shell part. There exists a spin pinning effect of the shell part on the core part. The increase of particle size weakens the spin pinning effect.
77 NANOSCIENCE AND NANOTECHNOLOGY↗