Radiation-induced uncertainty in laminar flame speed measured from propagating spherical flames
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Yu, Hao.
Explore the source record for details and available documents.
Selective extraction of metal ions from a complex aqueous mixture into an organic phase is used to separate toxic or radioactive metals from polluted environments and nuclear waste, as well as to produce industrially relevant metals, such as rare earth ions. Selectivity arises from the choice of an extractant amphiphile, dissolved in the organic phase, which interacts preferentially with the target metal ion. The extractant-mediated process of ion transport from an aqueous to an organic phase takes place at the aqueous–organic interface; nevertheless, little is known about the molecular mechanism of this process despite its importance. Although state-of-the-art X-ray scattering is uniquely capable of probing molecular ordering at a liquid–liquid interface with subnanometer spatial resolution, utilizing this capability to investigate interfacial dynamical processes of short temporal duration remains a challenge. We show that a temperature-driven adsorption transition can be used to turn the extraction on and off by controlling adsorption and desorption of extractants at the oil–water interface. Lowering the temperature through this transition immobilizes a supramolecular ion–extractant complex at the interface during the extraction of rare earth erbium ions. Under the conditions of these experiments, the ion–extractant complexes condense into a two-dimensional inverted bilayer, which is characterized on the molecular scale with synchrotron X-ray reflectivity and fluorescence measurements. Raising the temperature above the transition leads to Er ion extraction as a result of desorption of ion–extractant complexes from the interface into the bulk organic phase. XAFS measurements of the ion–extractant complexes in the bulk organic phase demonstrate that they are similar to the interfacial complexes.
The prepared g-C{sub 3}N{sub 4}/Cu{sub 2}O composite exhibited the enhanced photocatalytic activity under visible-light irradiation due to the stronger ability in separation of electron–hole pairs, which was proven by the transient photocurrent measurement. - Highlights: • The coupled Cu{sub 2}O with g-C{sub 3}N{sub 4} of narrow-band-gap semiconductor has been designed. • g-C{sub 3}N{sub 4}/Cu{sub 2}O is prepared via an alcohol-aqueous based on chemical precipitation method. • g-C{sub 3}N{sub 4}/Cu{sub 2}O exhibits the enhanced photocatalytic activity under visible-light. • The enhanced photocatalytic activity is proven by the transient photocurrent test. • A mechanism for the visible-light-driven photocatalysis of g-C{sub 3}N{sub 4}/Cu{sub 2}O is revealed. - Abstract: To overcome the drawback of low photocatalytic efficiency brought by electron–hole pairs recombination and narrow photo-response range, a novel g-C{sub 3}N{sub 4}/Cu{sub 2}O composite photocatalyst was designed and prepared successfully. Compared with bare Cu{sub 2}O and g-C{sub 3}N{sub 4}, the g-C{sub 3}N{sub 4}/Cu{sub 2}O composite exhibited significantly enhanced photocatalytic activity for acid orange-II (AO-II) degradation under visible light irradiation. Based on energy band positions, the mechanism of enhanced visible-light photocatalytic activity was proposed.
The CDEX Collaboration has been established for direct detection of light dark matter particles, using ultra-low energy threshold p-type point-contact germanium detectors, in China JinPing underground Laboratory (CJPL). The first 1 kg point-contact germanium detector with a sub-keV energy threshold has been tested in a passive shielding system located in CJPL. The outputs from both the point-contact p + electrode and the outside n + electrode make it possible to scan the lower energy range of less than 1 keV and at the same time to detect the higher energy range up to 3 MeV. The outputs from both p + and n + electrode may also provide a more powerful method for signal discrimination for dark matter experiment. Some key parameters, including energy resolution, dead time, decay times of internal X-rays, and system stability, have been tested and measured. The results show that the 1 kg point-contact germanium detector, together with its shielding system and electronics, can run smoothly with good performances. This detector system will be deployed for dark matter search experiments.
Optical waveguide lightmode spectroscopy (OWLS) is usually applied as a biosensor system to the sorption-desorption of proteins to waveguide surfaces. Here, we show that OWLS can be used to monitor the quality of oxide thin film materials and of coatings of pulsed laser deposition synthesized CdSe quantum dots (QDs) intended for solar energy applications. In addition to changes in data treatment and experimental procedure, oxide- or QD-coated waveguide sensors must be synthesized. We synthesized zinc stannate (Zn2SnO4) coated (Si,Ti)O2 waveguide sensors, and used OWLS to monitor the relative mass of the film over time. Films lost mass over time, though at different rates due to variation in fluid flow and its physical effect on removal of film material. The Pulsed Laser Deposition (PLD) technique was used to deposit CdSe QD coatings on waveguides. Sensors exposed to pH 2 solution lost mass over time in an expected, roughly exponential manner. Sensors at pH 10, in contrast, were stable over time. Results were confirmed with atomic force microscopy imaging. Limiting factors in the use of OWLS in this manner include limitations on the annealing temperature that maybe used to synthesize the oxide film, and limitations on the thickness of the film to be studied. Nevertheless, the technique overcomes a number of difficulties in monitoring the quality of thin films in-situ in liquid environments.
Friction stir welding and ultrasonic welding techniques were applied to join automotive magnesium alloys to steel sheet. The effect of tooling and process parameters on the post-weld microstructure, texture and mechanical properties was investigated. Static and dynamic loading were utilized to investigate the joint strength of both cast and wrought magnesium alloys including their susceptibility and degradation under corrosive media. The conditions required to produce joint strengths in excess of 75% of the base metal strength were determined, and the effects of surface coatings, tooling and weld parameters on weld properties are presented.
Graphical abstract: Both Mo{sub 2}C and Mo{sub 2}N can be transformed to MoP, whereas the reverse changes are inviable, which is used to develop a promising and practical pathway for preparing MoP nanoparticles. Highlights: {yields} Mo carbide, nitride and phosphide are prepared. {yields} The structural stability increases in the order of Mo{sub 2}N < Mo{sub 2}C < MoP. {yields} Both Mo{sub 2}C and Mo{sub 2}N can be transformed to MoP, whereas the reverse changes are inviable. {yields} This study develops a promising and practical pathway for preparing MoP nanoparticles. -- Abstract: The structural stability and transformations of Mo carbide, nitride and phosphide were investigated under various atmosphere conditions by X-ray diffraction (XRD). The results indicated that the order of structural stability of these Mo-based compounds was as follows: Mo{sub 2}N < Mo{sub 2}C < MoP. Both Mo{sub 2}C and Mo{sub 2}N can be transformed to MoP, whereas the reverse transformations did not occur. Noticeably, compared with those Mo sources containing oxygen, the use of Mo{sub 2}C/Mo{sub 2}N as Mo-source can produce finely dispersed MoP nanoparticles by the temperature-programmed reaction (TPR) method. The result was probably due to the fact that lower-levels H{sub 2}O generated during synthesis process can avoid strong hydrothermal sintering. The influence of formation energy had been considered and was found to relate to the structural stability and transformations of these Mo-based compounds.
Highlights: {yields} N-doped TiO{sub 2} are prepared by hydrothermally treating TiN with H{sub 2}O{sub 2}. {yields} The content of N in TiO{sub 2} can be controlled by the concentration of H{sub 2}O{sub 2}. {yields} The as-prepared N-TiO{sub 2} shows higher photocatalytic activity under visible light. -- Abstract: Nitrogen doped anatase TiO{sub 2} (N-TiO{sub 2}) were prepared by hydrothermally treating TiN with H{sub 2}O{sub 2}. The as-synthesized samples were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), UV-vis diffuse reflectance spectrum (DRS), Fourier transform infrared spectra (FT-IR) and X-ray photoelectron spectroscopy (XPS) techniques. The results confirmed that the hydrothermal oxidation is an effective method to prepare N-doped TiO{sub 2} anatase. The nitrogen concentration in TiO{sub 2} could be controlled by the concentration of H{sub 2}O{sub 2} solution. Photocatalytic degradation of methyl orange (MO) was carried out under visible light and UV-visible light irradiation, respectively. The as-prepared optimal N-TiO{sub 2} showed higher photocatalytic activity than N-P25 and P25, and exhibited excellent reusability.
B,N-TiO{sub 2} photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH{sub 3} at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO{sub 2} were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO{sub 2} lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 {sup o}C. Higher temperature may form many oxygen vacancies and Ti{sup 3+} species, resulting in the decrease of photocatalytic activity in visible light. -- Graphical abstract: The changes of photocatalytic activity of B,N-TiO{sub 2} with variable nitrogen doping temperatures are attributed to the transformation of surface structure and oxygen vacancies, and the Ti-O-B-N structure plays a vital role in photocatalytic activity under visible light irradiation. Display Omitted Research highlights: > B,N-TiO{sub 2} photocatalysts are synthesized by boron doping firstly and subsequently nitrogen doping in NH{sub 3} at variable temperatures. > The boron and nitrogen can be incorporated into the TiO{sub 2} lattice either interstitially or substitutionally or both. > The temperature of nitrogen doping affects the transformation of surface structure and oxygen vacancies. > The Ti-O-B-N structure plays an important role in photocatalytic activity under visible light irradiation.