Engineering topics

Young, Philip R.

Publications and source records attributed to Young, Philip R..

35 records · Page 2

NASA NTRS1992

Characterization of selected LDEF-exposed polymeric films

The characterization of selected experimental and commercially available thin polymeric films which received 10 months of exposure to the LEO environment on the Long Duration Exposure Facility is reported. The visual appearance of most specimens changed due to exposure. However, except for a silicon-containing copolymer film, chemical characterization including infrared, thermal, and X-ray photoelectron analyses showed that the molecular structure of the surviving material had not changed significantly in response to exposure. Surface texturing due to atomic oxygen erosion was documented using various microscopic analyses. The possibility of continued post-exposure degradation of some polymeric materials is proposed.

Young, Philip R.↗

NASA NTRS1992

Analysis of a space-exposed thermoplastic resin

The chemical characterization of a thermoplastic resin exposed to the low Earth orbit (LEO) environment for 10 months and for 5.8 years is reported. The resin, processed as a thick film and as a matrix for a graphite fiber reinforced composite, few exposed in the RAM direction on the NASA Long Duration Exposure Facility (LDEF). Differences attributable to environmental exposure were detected in infrared spectra and in various molecular weight parameters of film after 10 months in LEO. Those effects were not as apparent in composites after 5.8 years in LEO. Increased exposure to atomic oxygen toward the end of the LDEF mission probably scrubbed these effects from specimens exposed for 5.8 years. The intent of this study is to increase our fundamental understanding of space environmental effects on polymeric materials and to develop a benchmark for enhancing our methodology for and understanding of the ground-based simulation of space environmental effects.

Young, Philip R.↗

NASA NTRS1991

An analysis of LDEF-exposed silvered FEP teflon thermal blanket material

The characterization of selected silvered fluorinated ethylene propylene (FEP) teflon thermal blanket material which received 5 years and 9 months of exposure to the LEO environment on the Long Duration Exposure Facility is reported. X-ray photoelectron spectroscopy, infrared, and thermal analyses did not detect a significant change at the molecular level as the result of this exposure. However, various microscopic analyses revealed a roughening of the coating surface due to atomic oxygen erosion which resulted in some materials changing from specular reflectors of visible radiation to diffuse reflectors. The potential effect of silicon-containing molecular contamination on these materials is addressed.

Young, Philip R.↗

NASA NTRS1991

Chemical characterization of selected LDEF polymeric materials

Chemical characterization of selected polymeric materials which received exposure on the Long Duration Exposure Facility (LDEF) is reported. The specimens examined include silvered fluorinated ethylene propylene Teflon thermal blanket material, polysulfone, epoxy, polyimide matrix resin/graphite fiber reinforced composites, and several high performance polymer films. These specimens came from numerous LDEF locations, and thus received different environmental exposures. The results to date show no significant change at the molecular level in the polymer that survived exposure. Scanning electron and scanning tunneling microscopes show resin loss and a texturing of some specimens which resulted in a change in optical properties. The potential effect of a silicon-containing molecular contamination on these materials is addressed. The possibility of continued post-exposure degradation of some polymeric films is also proposed.

Young, Philip R.↗

NASA NTRS1991

Effects of LDEF flight exposure on selected polymeric films and thermal control coatings

The characterization of polymeric films and thermal control coatings which were exposed for five years and ten months to the low-Earth environment is reported. Changes in solar absorptance, thermal emittance, and transmission are compared to laboratory control specimens. Sputter-deposited metallic coatings are shown to eliminate atomic oxygen erosion of resin matrix composite materials. The effects of long-term atomic oxygen exposure to metallized FEP Teflon film is characterized. Chemical characterization of polymeric films indicates that although surface erosion occurs, the molecular structure of the basic polymeric film has not changed significantly in response to this exposure.

Slemp, Wayne S.↗

NASA NTRS1991

Effects of LDEF flight exposure on selected polymer matrix resin composite materials

The characterization of selected graphite fiber reinforced epoxy and polysulfone matrix resin composites which received exposure to the LEO environment on the LDEF is reported. The changes in mechanical properties of ultimate tensile strength and tensile modulus for exposed flight specimens are compared to the three sets of control specimens. Marked changes in surface appearance are discussed, and resin loss is reported. The chemical characterization including IR, thermal, and selected solution property measurements showed that the molecular structure of the polymeric matrix had not changed significantly in response to this exposure.

Slemp, Wayne S.↗

NASA NTRS1991

Characterization of selected LDEF polymer matrix resin composite materials

The characterization of selected graphite fiber reinforced epoxy (934 and 5208) and polysulfone (P1700) matrix resin composite materials which received 5 years and 10 months of exposure to the LEO environment on the Long Duration Exposure Facility is reported. Resin loss and a decrease in mechanical performance as well as dramatic visual effects were observed. However, chemical characterization including infrared, thermal, and selected solution property measurements showed that the molecular structure of the polymeric matrix had not changed significantly in response to this exposure. The potential effect of a silicon-containing molecular contamination of these specimens is addressed.

Young, Philip R.↗

NASA NTRS1990

FTIR Monitoring Of Curing Of Composites

Infrared-sensing optical fiber system developed to monitor principal infrared absorption bands resulting from vibrations of atoms and molecules as chemical bonds form when resin cured. System monitors resin chemistry more directly. Used to obtain Fourier transform infrared (FTIR) spectrum from graphite fiber/polyimide matrix resin prepreg. Embedded fiber optic FTIR sensor used to indicate state of cure of thermosetting composite material. Developed primarily to improve quality of advanced composites, many additional potential applications exist because principal of operation applicable to all organic materials and most inorganic gases. Includes monitoring integrities of composite materials in service, remote sensing of hazardous materials, and examination of processes in industrial reactors and furnaces.

Druy, Mark A.↗

NASA NTRS1990

Proceedings of the LDEF Materials Data Analysis Workshop

The 5-year, 10-month flight of the Long Duration Exposure Facility (LDEF) greatly enhanced the potential value of most LDEF materials, compared to the original 1-year flight plan. NASA recognized this potential by forming the LDEF Space Environmental Effects on Materials Special Investigation Group in early 1989 to address the expanded opportunities available in the LDEF structure and on experimental trays, so that the value of all LDEF materials to current and future space missions would be assessed and documented. The LDEF Materials Data Analysis Workshop served as one step toward the realization of that responsibility and ran concurrently with activities surrounding the successful return of the spacecraft to the NASA Kennedy Space Center. A compilation of visual aids utilized by speakers at the workshop is presented. Session 1 summarized current information on analysis responsibilities and plans and was aimed at updating the workshop attendees: the LDEF Advisory Committee, Principle Investigators, Special Investigation Group Members, and others involved in LDEF analyses or management. Sessions 2 and 3 addressed materials data analysis methodology, specimen preparation, shipment and archival, and initial plans for the LDEF Materials Data Base. A complementary objective of the workshop was to stimulate interest and awareness of opportunities to vastly expand the overall data base by considering the entire spacecraft as a materials experiment.

Stein, Bland A.↗

NASA NTRS1990

Characterization of a thermally imidized soluble polyimide film

A soluble aromatic poly(amic acid) film was converted to a soluble polyimide by staging at 25 deg intervals to 325 C and characterized at each interval by several analytical methods. The behavior observed was consistent with an interpretation that a reduction occurred in molecular weight of the poly(amic acid) during the initial stages of cure before the ultimate molecular weight was achieved as a polyimide. This interpretation was supported by the results of solution viscosity, gel permeation chromatography, low angle laser light scattering photometry and infrared spectroscopy analysis. The results serve to increase the fundamental understanding of how polyimides are thermally formed from poly(amic acids).

Young, Philip R.↗

NASA NTRS1989

Characterization of a thermally imidized soluble polyimide film

Young, Philip R.↗

NASA NTRS1989

Molecular weight characterization of advanced thermoplastic resins

Analytical techniques including low angle laser light scattering photometry (LALLS), differential viscometry (DV), gel permeation chromatography (GPC), GPC-LALLS and GPC-DV, were used to characterize the molecular weight and molecular weight distribution of several advanced thermoplastics. A discussion is presented of various molecular-weight-related parameters obtained by these techniques on an experimental polyimide and poly(arylene ether ketone) and a commercially available polysulfone. Where possible, these parameters are correlated with processability and selected mechanical properties. The molecular weight was found to vary during the thermal conversion of poly(amic acid) to polyimide. However, no change in composition of the polysulfone was noted in response to various processing procedures.

Young, Philip R.↗

NASA NTRS1988

FTIR characterization of thermally cycled PMR-15 composites

Chemical characterization results are presented for a variety of PMR-15/graphite composites, differentiated according to prepreg types and cure cycles, which were subjected to 1000 thermal cycles between 0 and 450 F. Fourier transform IR spectroscopy was used in conjunction with diffuse reflectance sampling to examine whether changes in the matrix resin chemistry due to environmental exposure may have contributed to microcracking. Analysis based on compound spectra revealed behavior associated with the oxidation of methylene groups to carbonyl groups on the composite surface; evidence of crosslinking also emerged, although the two phenomena do not appear to be related.

Young, Philip R.↗

NASA NTRS1988

In situ composite cure monitoring using infrared transmitting optical fibers

The development of infrared-transmitting optical fibers as sensors for monitoring the cure of advanced composite materials is reported. Fourier transform infrared spectra are presented which were remotely sensed during the cure of a high performance polyimide resin and a graphite/polyimide matrix prepreg using an 0.1 mm O.D. x 3 m chalcogenide optical fiber. A discussion of the fiber and sensor element, absorption mechanism and potential applications is presented.

Young, Philip R.↗

NASA NTRS1987

Cure study of soluble aromatic polyimide films

Several soluble aromatic poly(amic acid) films were staged at intervals to 325 C and characterized by IR spectroscopy and various solution property techniques. A series of films in which the polymer had been endcapped in an effort to control chain extension was also examined. Much of the behavior observed is consistent with an interpretation that a reduction in molecular weight occurred during cure before the ultimate molecular weight was achieved as a polyimide.

Young, Philip R.↗

NASA NTRS1986

Isomeric bismaleimides and polyaspartimides

The properties of a series of bismaleimides and polyaspartimides synthesized from the 3,3', 3,4', and 4,4' isomers of diaminodiphenylmethane are described and compared. The effects of the amine isomerism on the characteristics of bismaleimides and their polymers are investigated. It is observed that the 3,3'-bismaleimide had the highest crystalline melting point, the 4,4' isomer the lowest, and the 3,4'-bismaleimide was slightly above the all-para compounds; for the polyaspartimides, the all-para combinations had the highest glass transition temperature (218 C) and the all-meta the lowest (168 C). The data reveal that strong, flexible films were obtained only from the polyaspartimides made from the 4,4'-diamine/4,4'bismaleimide and the 3,4'-diamine/3,4'bismaleimide combinations; and the tensile properties of the 3,4'polymer films were as good as those of the 4,4 'polymer.

Bell, Vernon L.↗

NASA NTRS1985

Characterization of a soluble polyimide

The solid phase thermal imidization of a soluble 4,4-prime-bis (3,4-dicarboxyphynoxy) diphenyl sulfide dianhydride plus 2,2-bis 4-(4-aminophenoxyl)phenyl hexafluoropropane (BDSDA-BDAF) polyimide precursor staged between 40 and 325 C was characterized by gel permeation chromatography, inherent viscosity, and number average molecular weight measurements. The information obtained indicated that this polyamic acid experienced an initial reduction in molecular weight during cure before achieving its ultimate molecular weight as a polyimide. The event was most likely related to the development of an anhydride band that appeared in the infrared spectrum around 1850/cm as the material cured. Correlation through infrared spectroscopy with a previous study dealing with several common, but insoluble, polyimide precursors, suggested that polyimides, in general, exhibit this trend in molecular weight behavior.

Young, Philip R.↗