Engineering Papers⌕ Search

Engineering topics

Yip, Sidney

Publications and source records attributed to Yip, Sidney.

Data-Driven Insights into the Structural Essence of Plasticity in High-Entropy Alloys

The heterogeneous mechanical response of a crystalline alloy with multiple principal elements was investigated using molecular dynamics simulations. The local configuration of the alloy in its quiescent state was characterized by the variables derived from the gyration tensor and the atomic electronegativity. A multivariate analysis identified the geometric and chemical factors that influenced the atomic packing variations. Further, upon straining, the non-affine displacement exhibited spatial heterogeneity. A statistical correlation was established between the local yield events and the specific features of the local configuration. Our findings, validated by the performance metrics analysis, provided a structural criterion for the instability mechanisms in high-entropy alloys (HEAs) and enhanced the understanding of their plasticity.

36 MATERIALS SCIENCE↗

Viscoelastic relaxation and topological fluctuations in glass-forming liquids

In this study, a method for characterizing the topological fluctuations in liquids is proposed. This approach exploits the concept of the weighted gyration tensor of a collection of particles and permits the definition of a local configurational unit (LCU). The first principal axis of the gyration tensor serves as the director of the LCU, which can be tracked and analyzed by molecular dynamics simulations. Analysis of moderately supercooled Kob–Andersen mixtures suggests that orientational relaxation of the LCU closely follows viscoelastic relaxation and exhibits a two-stage behavior. The slow relaxing component of the LCU corresponds to the structural, Maxwellian mechanical relaxation. Additionally, it is found that the mean curvature of the LCUs is approximately zero at the Maxwell relaxation time with the Gaussian curvature being negative. This observation implies that structural relaxation occurs when the configurationally stable and destabilized regions interpenetrate each other in a bicontinuous manner. Finally, the mean and Gaussian curvatures of the LCUs can serve as reduced variables for the shear stress correlation, providing a compelling proof of the close connection between viscoelastic relaxation and topological fluctuations in glass-forming liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the mechanisms of amorphous creep through molecular simulation

Significance The individual and collective molecular displacements in an amorphous solid undergoing plastic deformation are simulated by an atomistic method that allows incremental motions to be observed over a time window of fractions of seconds. Because the timescale matches well with the conditions of experimental measurements, simulation details provide dynamical evidence for the fundamental mechanisms of amorphous creep. In particular, knowledge of the interplay between diffusion (flow) and mechanical deformation processes enables us to explain the stress and temperature behavior of the experimental data as well as the validity of model descriptions of molecular mechanisms in terms of spatially and temporally heterogeneous fluctuations.

42 ENGINEERING↗

Mechanical behavior of a composite interface: Calcium-silicate-hydrates

The generalized stacking fault (GSF) is a conceptual procedure historically used to assess shear behavior of defect-free crystalline structures through molecular dynamics or density functional theory simulations. We apply the GSF technique to the spatially and chemically complex quasi-layered structure of calcium-silicate-hydrates (C-S-H), the fundamental nanoscale binder within cementitious materials. A failure plane is enforced to calculate the shear traction-displacement response along a composite interface containing highly confined water molecules, hydroxyl groups, and calcium ions. GSF simulations are compared with affine (homogeneous) shear simulations, which allow strain to localize naturally in response to the local atomic environment. Comparison of strength and deformation behavior for the two loading methods shows the composite interface controls bulk shear deformation. Both models indicate the maximum shear strength of C-S-H exhibits a normal-stress dependency typical of cohesive-frictional materials. These findings suggest the applicability of GSF techniques to inhomogeneous structures and bonding environments, including other layered systems such as biological materials containing organic and inorganic interfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Materials aging at the mesoscale: Kinetics of thermal, stress, radiation activations

The complexity of materials aging may be seen as a result of the interplay between several activation processes operating on multiple spatial and temporal scales. Though the disciplines involved may seem disparate at first, material aging fundamentally could be linked by the same set of underlying activations and responses of the system. We view how recent studies of shear-induced deformation and rheological flow initiated in the soft-matter community can be leveraged to probe the mechanisms of radiation damage in nuclear materials. Bridging these two traditionally separate areas of research demonstrates the emerging notions of mesoscale science as a research frontier concerned with linking macroscale behavior to microscale processes in driven systems. We believe the combining of microstructure-sensitive measurements with fundamental theories and mechanism-specific simulations is crucial to addressing metastable materials responses of strongly activated states.

36 MATERIALS SCIENCE↗

High Surface Reactivity and Water Adsorption on NiFe 2 O 4 (111) Surfaces

Transition metal-doped ferrites are attractive candidates for a wide range of applications including catalysis and electronic and magnetic devices. Although their bulk characteristics are well-understood, very little is known about their surface properties at the molecular level. Here, we demonstrate high reactivity of NiFe 2 O 4 (111) surfaces, a Ni-doped ferrite, by elucidating the surface structure and water adsorption mechanism using density functional theory with on-site correction for Couloumb interaction (DFT + U). The surface reactivity of NiFe 2 O 4 (111) surfaces (with 0.25 ML Fe tet1 and 0.5 ML Fe oct2–tet1 terminations) is shown to be significantly higher in comparison with the undoped Fe 3 O 4 (111) surfaces. Dissociation of water is found to be highly favorable with an adsorption energy of -1.11 eV on the 0.25 ML Fe tet 1 terminated surface and -2.30 eV on the 0.5 ML Fe oct2–tet1 terminated surface. In addition, we computed a low activation barrier of 0.18 eV for single water molecule dissociation on the 0.25 ML Fe tet1 termination, while the corresponding dissociation reaction on the 0.5 ML Fe oct2–tet1 termination proceeded without a barrier. The reactivity of NiFe 2 O 4 surfaces toward water is understood based on strong interactions between the adsorbing OH radical molecular orbitals and the d orbitals of the surface Fe atom. In particular, the new bonding orbitals created due to the interaction of the OH 3σ orbital and the Fe d states are pushed deeper down the energy axis resulting in a greater energy gain and higher water adsorption strength in the case of 0.5 ML Fe oct2–tet1 termination. Furthermore, transition-metal surface resonances (TMSR) are found to be good descriptors of the surface reactivity in the two ferrites investigated and is a useful measure to design ferrite-based catalytic systems. These findings have strong implications toward the use of NiFe 2 O 4 as an effective metal-doped ferrite catalyst in a typical industrial process such as the water-gas shift (WGS) reaction and are of significance in fuel materials durability in nuclear reactors where ferrites are known to trap boron resulting in failure of the reactors.

Chemistry↗

Mapping Strain-rate Dependent Dislocation-Defect Interactions by Atomistic Simulations

Probing the mechanisms of defect-defect interactions at strain rates lower than 106 s-1 is an unresolved challenge to date to molecular dynamics (MD) techniques. Here we propose a novel atomistic approach based on transition state theory and the concept of a strain-dependent effective activation barrier that is capable of simulating the kinetics of dislocation-defect interactions at virtually any strain rate, exemplified within 10-7 to 107 s-1. We apply this approach to the problem of an edge dislocation colliding with a cluster of self-interstitial atoms (SIA) under shear deformation. Using an activation-relaxation algorithm (1), we uncover a unique strain-rate dependent trigger mechanism that allows the SIA cluster to be absorbed during the process leading to dislocation climb. Guided by this finding, we determine the activation barrier of the trigger mechanism as a function of shear strain, and use that in a coarse-graining rate equation formulation for constructing a mechanism map in the phase space of strain-rate and temperature. Our predictions of a crossover from a defect recovery at the low strain rate regime to defect absorption behavior in the high strain-rate regime are validated against our own independent, direct MD simulations at 105 to 107 s-1. Implications of the present approach for probing molecular-level mechanisms in strain-rate regimes previously considered inaccessible to atomistic simulations are discussed.

activation mecanism↗

Mechanism of Void Nucleation and Growth in bcc Fe: Atomistic Simulations at Experimental Time Scales

Evolution of small-vacancy clusters in bcc Fe is simulated using a multiscale approach coupling an atomistic activation-relaxation method for sampling transition-state pathways with environment-dependent reaction coordinate calculations and a kinetic Monte Carlo simulation to reach time scales on the order of {approx}10{sup 4} s. Under vacancy-supersaturated condition, di- and trivacancy clusters form and grow by coalescence (Ostwald ripening). For cluster size greater than four we find a transition temperature of 150 deg. C for accelerated cluster growth, as observed in positron annihilation spectroscopy experiments. Implications for the mechanism of stage-IV radiation-damage-recovery kinetics are discussed.

36 MATERIALS SCIENCE↗

Competing strain effects in reactivity of LaCoO 3 with oxygen

Planar strain effects on oxygen-vacancy formation and oxygen adsorption on LaCoO 3 are shown to manifest through competing mechanisms. Through first-principles calculations, we postulate that these unit processes are facilitated by elastic stretching. However, spin-state transitions and Co-O bond exchange hinder these processes by trapping the lattice oxygen with increasing tensile strain. A transition from chemisorption to physisorption of the oxygen molecule is identified at high strains. Insights on charge-density profiles, density of electronic states, and stress thresholds suggest the possibility of tuning strain-mediated reactivity in LaCoO 3 and related perovskite oxides.

36 MATERIALS SCIENCE↗

Panel 3 - material science

In the last decades, NNSA's national security challenge has evolved, and the role of simulation and computation has grown dramatically. The process of certifying nuclear weapons performance has changed from one based on integrated tests to science-based certification in which underground nuclear tests have been replaced by large-scale simulations, appropriately validated with fundamental experimental data. Further, the breadth of national security challenges has expanded beyond stewardship of a nuclear deterrent to a broad range of global and asymmetric threats. Materials challenges are central to the full suite of these national security challenges. Mission requirements demand that materials perform predictably in extreme environments -- high pressure, high strain rate, and hostile irradiation and chemical conditions. Considerable advances have been made in incorporating fundamental materials physics into integrated codes used for component certification. On the other hand, significant uncertainties still remain, and materials properties, especially at the mesoscale, are key to understanding uncertainties that remain in integrated weapons performance codes and that at present are treated as empirical knobs. Further, additional national security mission challenges could be addressed more robustly with new and higher performing materials.

36 MATERIALS SCIENCE↗