Engineering topics

Yinnon, H.

Publications and source records attributed to Yinnon, H..

6 records

NASA NTRS1983

Cooling rates for glass containing lunar compositions

Cooling rates required to form glassy or partly-crystalline bodies of 14 lunar compositions have been estimated using a previously introduced, simplified model. The calculated cooling rates are found to be in good agreement with cooling rates measured for the same compositions. Measurements are also reported of the liquidus temperature and glass transition temperature for each composition. Inferred cooling rates are combined with heat flow analyses to obtain insight into the thermal histories of samples 15422, 14162, 15025, 74220, 74241, 10084, 15425, and 15427. The critical cooling rates required to form glasses of 24 lunar compositions, including the 14 compositions of the present study, are suggested to increase systematically with increasing ratio of total network modifiers/total network formers in the compositions. This reflects the importance of melt viscosity in affecting glass formation.

Fang, C. Y.↗

NASA NTRS1982

Simplified model evaluation of cooling rates for glass-containing lunar compositions

The simplified model of glass formation and the development of partial crystallinity in cooled bodies has been applied to lunar compositions 10060, 15028, 15086, 15101, 15286, 15301, 15498, 15499, 60255, 65016, 77017, Apollo 15 green glass and LUNA 24 highland basalt. The critical cooling rates for glass formation predicted by the simplified model are found to be in good agreement (to within an order of magnitude) with those predicted by the exact treatment of crystallization statistics. These predicted critical cooling rates are in even better agreement (a factor of 2) with measured values of the rates required to form glasses of the materials.

Uhlmann, D. R.↗

NASA NTRS1981

Solute partitioning under continuous cooling conditions as a cooling rate indicator

A model of solute partitioning in a finite body under conditions of continuous cooling is developed for the determination of cooling rates from concentration profile data, and applied to the partitioning of zirconium between ilmenite and ulvospinel in the Apollo 15 Elbow Crater rocks. Partitioning in a layered composite solid is described numerically in terms of concentration profiles and diffusion coefficients which are functions of time and temperature, respectively; a program based on the model can be used to calculate concentration profiles for various assumed cooling rates given the diffusion coefficients in the two phases and the equilibrium partitioning ratio over a range of temperatures. In the case of the Elbow Rock gabbros, the cooling rates are calculated from measured concentration ratios 10 microns from the interphase boundaries under the assumptions of uniform and equilibrium initial conditions at various starting temperatures. It is shown that the specimens could not have had uniform concentrations profiles at the previously suggested initial temperature of 1350 K. It is concluded that even under conditions where the initial temperature, grain sizes and solute diffusion coefficients are not well characterized, the model can be used to estimate the cooling rate of a grain assemblage to within an order of magnitude.

Onorato, P. I. K.↗

NASA NTRS1980

Viscous flow and crystallization behavior of tektite glasses

The variation of viscosity with temperature was determined in the 200-2000 K range for a Muong Nong tektite material. The viscosity at the liquidus temperature of 1320 C is 20,000 P; treatments between 900 and 1300 C do not result in significant crystallization in the natural sample except when the sample is heated in contact with a synthetic tektite composition. Two synthetic microtektite with lower SiO2 contents than the Muong Nong material were also examined; heat flow calculations were performed for 2.5 to 10 cm spheres of tektite when cooling by radiation.

Klein, L. C.↗

NASA NTRS1980

On the barrier to crystal nucleation in lunar glasses

The paper describes an analytical method for calculating in detail the size distributions of small crystallites and nuclei in supercooled liquids as they are being quenched to form a glass and subsequently reheated above the glass transition to produce crystallization. This method is applied to experiments performed using differential thermal analysis (DTA) to estimate the barriers to crystal nucleation and the cooling rates required to form glasses or bodies with various degrees of crystallinity. DTA data and derived nucleation barriers are reported for anorthite and for the following lunar compositions: 15498, 15418, matrix and intrusion compositions of breccia 15286, Apollo 15 green glass, Luna 24 highland basalt, and 65016.

Yinnon, H.↗

NASA NTRS1979

Partitioning as a cooling rate indicator

The paper presents a mathematical model for describing solute partitioning under continuous cooling conditions. It is shown that solute concentration profiles can be calculated for any cooling rate as a function of temperature provided that the appropriate data on diffusion and partitioning are known. As an example, the model is applied to zirconium partitioning between ilmenite and ulvospinel in a number of Apollo 15 Elbow Crater rocks in order to estimate the rates at which they cooled.

Onorato, P. I.↗