Engineering Papers⌕ Search

Engineering topics

Yin, Liang

Publications and source records attributed to Yin, Liang.

At least 37 records · Page 2

Heavily Tungsten–Doped Sodium Thioantimonate Solid–State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion

A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. Here, the 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Heavily Tungsten-Doped Sodium Thioantimonate Solid-State Electrolytes with Exceptionally Low Activation Energy for Ionic Diffusion

A strategy for modifying the structure of solid-state electrolytes (SSEs) to reduce the cation diffusion activation energy is presented. Two heavily W-doped sodium thioantimonate SSEs, Na 2.895 W 0.3 Sb 0.7 S 4 and Na 2.7 W 0.3 Sb 0.7 S 4 are designed, both exhibiting exceptionally low activation energy and enhanced room temperature (RT) ionic conductivity; 0.09 eV, 24.2 mS/cm and 0.12 eV, 14.5 mS/cm. At –15 °C the Na 2.895 W 0.3 Sb 0.7 S 4 displays a total ionic conductivity of 5.5 mS/cm. The 30 % W content goes far beyond the 10–12 % reported in the prior studies, and results in novel pseudo-cubic or orthorhombic structures. Here, calculations reveal that these properties result from a combination of multiple diffusion mechanisms, including vacancy defects, strongly correlated modes and excessive Na-ions. An all-solid-state battery (ASSB) using Na 2.895 W 0.3 Sb 0.7 S 4 as the primary SSE and a sodium sulfide (Na 2 S) cathode achieves a reversible capacity of 400 mAh g –1 .

sodium metal battery (SMB)↗

Tunning the linkage of structure units to enable stable spinel-based cathode in the wide potential window

The low practical capacity (<140 mA h g –1 ) of spinel phase LiMn 2–x Ni x O 4 (0 < x < 1) excludes it from high energy density lithium ion batteries (LIBs) for powering electric vehicles. Extending the operating potential window from 3.0 to 4.8 V to 2.0–4.8 V can double the capacity, but result in fast capacity decay due to the drastic cubic-tetragonal phase transition below 3.0 V, induced by serious Jahn-Teller (J-T) distortion of structure units (Mn 3+ )O 6 octahedra. Herein, we propose a novel strategy to suppress J-T distortion by tuning the linkage of structure units MnO 6 octahedra. The original full-vertex-sharing LiO 4 tetrahedra around MnO 6 octahedra in spinel phase are partially replaced by edge-sharing LiO 6 octahedra, which relate Mn-O bonds along the dz 2 direction with those along the d xy plane, thus significantly mitigating J-T distortion and suppressing the phase transition when discharged to 2.0 V. Following this strategy, the prepared spinel-based cathode achieves a high reversible capacity of about 290 mA h g –1 and an energy density up to 957 W h kg –1 with improved cycling stability. Furthermore, this work finds a new opportunity for the traditional spinel cathode towards applications in high energy density LIBs in a low cost and sustainable manner.

25 ENERGY STORAGE↗

In situ observation of thermal-driven degradation and safety concerns of lithiated graphite anode

Abstract Graphite, a robust host for reversible lithium storage, enabled the first commercially viable lithium-ion batteries. However, the thermal degradation pathway and the safety hazards of lithiated graphite remain elusive. Here, solid-electrolyte interphase (SEI) decomposition, lithium leaching, and gas release of the lithiated graphite anode during heating were examined by in situ synchrotron X-ray techniques and in situ mass spectroscopy. The source of flammable gas such as H 2 was identified and quantitively analyzed. Also, the existence of highly reactive residual lithium on the graphite surface was identified at high temperatures. Our results emphasized the critical role of the SEI in anode thermal stability and uncovered the potential safety hazards of the flammable gases and leached lithium. The anode thermal degradation mechanism revealed in the present work will stimulate more efforts in the rational design of anodes to enable safe energy storage.

25 ENERGY STORAGE↗

Operando X-ray Diffraction Studies of the Mg-Ion Migration Mechanisms in Spinel Cathodes for Rechargeable Mg-Ion Batteries

A promising high-voltage spinel oxide cathode material MgCrMnO 4 with 18% Mg/Mn inversion was synthesized successfully. A new custom operando battery device was designed to study the cation migration mechanisms of the MgCrMnO 4 cathode using 0.1 M Mg(TPFA) 2 electrolyte dissolved in triglyme and activated carbon as the anode. For the first time in multivalent batteries, high-quality operando diffraction data enabled the accurate quantification of cation contents in the host structure. Besides the exceptional reversibility of 12% Mg 2+ insertion in Mg 1- x CrMnO 4 ( x ≤ 1), a partially reversible insertion of excess Mg 2+ during overdischarging was also observed. Moreover, the insertion/extraction reaction was experimentally shown to be accompanied by a series of cation redistributions in the spinel framework, which were further supported by density functional theory calculations. Furthermore, the inverted Mn is believed to be directly involved in the cation migrations, which would cause voltage hysteresis and irreversible structural evolution after overdischarging. Tuning the Mg/Mn inversion rate could provide a direct path to further optimize spinel oxide cathodes for Mg-ion batteries, and more generally, the operando techniques developed in this work should play a key role in understanding the complex mechanisms involved in multivalent ion insertion systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stress- and interface-compatible red phosphorus anode for high-energy and durable sodium-ion batteries

Sodium-ion battery is a promising candidate for energy storage application, but the absence of high-capacity and low-cost anode materials significantly limit their practical specific energy and cost. Red phosphorus (RP) possesses a high theoretical specific capacity but suffers from large volume change, low electronic conductivity and unstable solid-electrolyte interphase (SEI). Herein, a hierarchical micro/nanostructured antimony-doped RP/carbon anode was developed, which demonstrate extraordinary electrochemical performance with high initial Coulombic efficiency of ~90%, high areal (~1.7 mAh cm-2) capacity together with good cycle stability and rate capability. Combined experimental and computational studies consistently revealed that such a unique structural design can dramatically accommodate the mechanical stress and moreover effectively restrain the undesired decomposition of electrolyte solvents regardless of electrolytes formulation, resulting in superior structural integrity and thin/robust SEI formation during cycling. The present finding has offered an alternative strategy for stress management and interface engineering on high-capacity alloying-based anode materials.

Liu, Xiang↗

Stoichiometric irreversibility of aged garnet electrolytes

Solid-state lithium batteries (SSLBs) have been regarded as one of the next-generation energy storage systems. With the adoption of solid-state electrolytes (SSEs) and lithium metal anodes, SSLBs enable higher energy density and more reliable safety than the state-of-the-art lithium-ion batteries. Among potential SSEs, the cation-doped Li 7 La 3 Zr 2 O 12 (LLZO) is promising for its high ionic conductivity (~10 –3 S cm –2 ) at room temperature and high stability with Li metal anode. However, the storage of doped LLZO in the ambient condition suffers the aging effect, including the structural transition (i.e. low-temperature cubic form) and the stoichiometric changes (i.e. Li 2 CO 3 ). These changes are detrimental to LLZO ionic conductivity and interfacial stability in SSLBs. To this end, in this study we are motivated to investigate the structural and stoichiometric reversibility of aged LLZO during thermal treatment. With the help of an in-situ synchrotron-based high-energy X-ray diffraction technique, our experiments revealed that the LLZO powders became a low-temperature cubic phase when exposed to the ambient condition for an extended period of time. A high temperature cubic form can be restored after a thermal treatment of the aged LLZO powder, regardless of the type of dopant. However, the restoration of the stoichiometry remained a challenge, and the degree of the restoration showed a clear dependence on the dopant chemistry.

36 MATERIALS SCIENCE↗

Quantifying the reaction mechanisms of a high-capacity CuP 2 /C composite anode for potassium ion batteries

Introducing metals into phosphorus to form metal phosphide materials as anodes for potassium ion batteries (PIBs) is an effective strategy to improve the electronic conductivity and alleviate the volume change during cycling, although with a compromise of capacity. Here in this paper, we explore a CuP 2 /C composite as a novel anode for PIBs, which delivers a high reversible capacity of >450 mA h g -1 . Unexpectedly, our results reveal that the POx components existing in the prepared composite are reversible, through a quantitative analysis via high-resolution solid-state 31 P NMR and synchrotron X-ray diffraction tests. Their potassiation products K 3 PO 4 and K 4 P 2 O 7 can react with K–P alloys and turn back to PO x during depotassiation, which probably accounts for the high capacity of the prepared material. The results also illustrate a crystallization–amorphization evolution process during cycling involving nanocrystalline α-K 4 P 6 , K 4 P 3 and KP, and amorphous K 4 P 6 , KP and K 3 P phases, among which, the amorphous phases are identified for the first time.

25 ENERGY STORAGE↗

Probing the Thermal-Driven Structural and Chemical Degradation of Ni-Rich Layered Cathodes by Co/Mn Exchange

The intrinsic poor thermal stability of layered LiNi x Co y Mn 1-x-y O 2 (NCM) cathodes and the exothermic side reactions triggered by the associated oxygen release are the main safety threats for their large-scale implantation. In NCM family, it is widely accepted that Ni is the stability troublemaker, while Mn has long been considered as a structure stabilizer, whereas the role of Co remains elusive. Here, via Co/Mn exchange in Ni-rich LiNi 0.83 Co 0.11 Mn 0.06 O 2 cathode, we demonstrate that, the chemical and structural stability of the deep delithiated NCM cathodes are significantly affected by Co, rather than the widely reported Mn. Operando synchrotron X-ray characterization coupling with in situ mass spectrometry reveal that the Co 4+ reduces prior to the reduction of Ni 4+ , and could thus prolong the Ni migration by occupying the tetrahedra sites, and hence postpone the oxygen release and thermal failure. In contrast, the Mn itself is stable, but barely stabilizes the Ni 4+ . Our results highlight the importance of evaluating the intrinsic role of compositional tuning on Ni-rich/Co-free layered oxide cathode materials to guarantee the safe operation of high-energy Li-ion batteries.

25 ENERGY STORAGE↗

High-Voltage Phosphate Cathodes for Rechargeable Ca-Ion Batteries

Calcium-ion batteries (CIBs) are under investigation as next-generation energy storage devices due to their theoretically high operating potentials and lower costs tied to the high natural abundance of calcium. However, the development of CIBs has been limited by the lack of available positive electrode materials. In this study, for the first time, we report two functional polyanionic phosphate materials as high-voltage cathodes for CIBs at room temperature. NaV 2 (PO 4 ) 3 electrodes were found to reversibly intercalate 0.6 mol of Ca 2+ (81 mA h g –1 ) near 3.2 V (vs Ca 2+ /Ca) with stable cycling performance at a current density of 3.5 mA g –1 . The olivine framework material FePO 4 reversibly intercalates 0.2 mol of Ca 2+ (72 mA h g –1 ) near 2.9 V (vs Ca 2+ /Ca) at a current density of 7.5 mA g –1 in the first cycle. Structural, electronic, and compositional changes are consistent with reversible Ca 2+ intercalation into these two materials.

25 ENERGY STORAGE↗

Dynamics of Hydroxyl Anions Promotes Lithium Ion Conduction in Antiperovskite Li 2 OHCl

Li 2 OHCl is an exemplar of the antiperovskite family of ionic conductors, for which high ionic conductivities have been reported, but in which the atomic-level mechanism of ion migration is unclear. The stable phase is both crystallographically defective and disordered, having similar to 1/3 of the Li sites vacant, while the presence of the OH(- )anion introduces the possibility of rotational disorder that may be coupled to cation migration. In this work, complementary experimental and computational methods are applied to understand the relationship between the crystal chemistry and ionic conductivity in Li 2 OHCl , which undergoes an orthorhombic to cubic phase transition near 311 K (approximate to 38 degrees C) and coincides with the more than a factor of 10 change in ionic conductivity (from 1.2 x 10 -5 mS/cm at 37 degrees C to 1.4 x 10 -3 mS/cm at 39 degrees C). X ray and neutron experiments conducted over the temperature range 20-200 degrees C, including diffraction, quasi-elastic neutron scattering (QENS), the maximum entropy method (MEM) analysis, and ab initio molecular dynamics (AIMD) simulations, together show conclusively that the high lithium ion conductivity of cubic Li2OHCl is correlated to "paddlewheel" rotation of the dynamic OH - anion. The present results suggest that in antiperovskites and derivative structures a high cation vacancy concentration combined with the presence of disordered molecular anions can lead to high cation mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Antiperovskite Solid Electrolytes: Comparing Li 3 SI, Na 3 SI, and Ag 3 SI

Prior calculations have predicted that chalcohalide anti-perovskites may exhibit enhanced ionic mobility compared to oxyhalide anti-perovskites as solid-state electrolytes. Herein, the synthesis of Ag-, Li- and Na-based chalcohalide anti-perovskites is investigated using first-principle calculations and in situ synchrotron X-ray diffraction. These techniques demonstrate that the formation of Ag 3 SI is facilitated by the adoption of a common body centered cubic packing of S 2– and I – in the reactants and products at elevated temperatures, with additional stabilization achieved by the formation of a solid solution of the anions. Further, the absence of these two features appears to hinder the formation of the analogous Li and Na anti-perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗