Engineering Papers⌕ Search

Engineering topics

Ye, Ruquan

Publications and source records attributed to Ye, Ruquan.

Flash healing of laser-induced graphene

The advancement of laser-induced graphene (LIG) technology has streamlined the fabrications of flexible graphene devices. However, the ultrafast kinetics triggered by laser irradiation generates intrinsic amorphous characteristics, leading to high resistivity and compromised performance in electronic devices. Healing graphene defects in specific patterns is technologically challenging by conventional methods. Herein, we report the rapid rectification of LIG’s topological defects by flash Joule heating in milliseconds (referred to as F-LIG), whilst preserving its overall structure and porosity. The F-LIG exhibits a decreased I D /I G ratio from 0.84 – 0.33 and increased crystalline domain from Raman analysis, coupled with a 5-fold surge in conductivity. Pair distribution function and atomic-resolution imaging delineate a broader-range order of F-LIG with a shorter C-C bond of 1.425 Å. The improved crystallinity and conductivity of F-LIG with excellent flexibility enables its utilization in high-performance soft electronics and low-voltage disinfections. Notably, our F-LIG/polydimethylsiloxane strain sensor exhibits a gauge factor of 129.3 within 10% strain, which outperforms pristine LIG by 800%, showcasing significant potential for human-machine interfaces.

36 MATERIALS SCIENCE↗

Direct Synthesis of Ammonia from Nitrate on Amorphous Graphene with Near 100% Efficiency

Abstract Ammonia is an indispensable commodity in the agricultural and pharmaceutical industries. Direct nitrate‐to‐ammonia electroreduction is a decentralized route yet challenged by competing side reactions. Most catalysts are metal‐based, and metal‐free catalysts with high nitrate‐to‐ammonia conversion activity are rarely reported. Herein, it is shown that amorphous graphene synthesized by laser induction and comprising strained and disordered pentagons, hexagons, and heptagons can electrocatalyze the eight‐electron reduction of NO 3 − to NH 3 with a Faradaic efficiency of ≈100% and an ammonia production rate of 2859 µg cm −2 h −1 at −0.93 V versus reversible hydrogen electrode. X‐ray pair‐distribution function analysis and electron microscopy reveal the unique molecular features of amorphous graphene that facilitate NO 3 − reduction. In situ Fourier transform infrared spectroscopy and theoretical calculations establish the critical role of these features in stabilizing the reaction intermediates via structural relaxation. The enhanced catalytic activity enables the implementation of flow electrolysis for the on‐demand synthesis and release of ammonia with >70% selectivity, resulting in significantly increased yields and survival rates when applied to plant cultivation. The results of this study show significant promise for remediating nitrate‐polluted water and completing the NO x cycle.

Huang, Libei↗

Preparation of 2D Polyaniline/MoO 3– x Superlattice Nanosheets via Intercalation-Induced Morphological Transformation for Efficient Chemodynamic Therapy

Organic intercalation of layered nanomaterials is an attractive strategy to fabricate organic/inorganic superlattices for a wide range of promising applications. However, the synthesis of 2D organic/inorganic superlattice nanosheets remains a big challenge. In this work, the preparation of 2D polyaniline/MoO 3–x (PANI/MoO 3–x ) superlattice nanosheets via intercalation-induced morphological transformation from MoO 3 nanobelts, as efficient Fenton-like reagents for chemodynamic therapy (CDT), is reported. Micrometer-long MoO 3 nanobelts are co-intercalated with Na + /H 2 O followed by the guest exchange with aniline monomer for in situ polymerization to obtain PANI/MoO 3–x nanosheets. Intriguingly, the PANI intercalation can induce the morphological transformation from long MoO 3 nanobelts to 2D PANI/MoO 3–x nanosheets along with the partial reduction of Mo 6+ to Mo 5+ , and generation of rich oxygen vacancies. More importantly, thanks to the PANI intercalation-induced activation, the PANI/MoO 3–x nanosheets exhibit excellent Fenton-like catalytic activity for generation of hydroxyl radical (·OH) by decomposing H 2 O 2 compared with the MoO 3 nanobelts. It is speculated that the good conductivity of PANI can facilitate electron transport during the Fenton-like reaction, thereby enhancing the efficiency of CDT. Thus, the polyvinylpyrrolidone-modified PANI/MoO 3–x nanosheets can function as Fenton-like reagents for highly efficient CDT to kill cancer cells and eradicate tumors.

2D materials↗

Atomically Thin, Ionic–Covalent Organic Nanosheets for Stable, High–Performance Carbon Dioxide Electroreduction

The incorporation of charged functional groups is effective to modulate the activity of molecular complexes for the CO 2 reduction reaction (CO 2 RR), yet long-term heterogeneous electrolysis is often hampered by catalyst leaching. Herein, an electrocatalyst of atomically thin, cobalt-porphyrin-based, ionic–covalent organic nanosheets (CoTAP-iCONs) is synthesized via a post-synthetic modification strategy for high-performance CO 2 -to-CO conversion. The cationic quaternary ammonium groups not only enable the formation of monolayer nanosheets due to steric hindrance and electrostatic repulsion, but also facilitate the formation of a *COOH intermediate, as suggested by theoretical calculations. Consequently, CoTAP-iCONs exhibit higher CO 2 RR activity than other cobalt-porphyrin-based structures: an 870% and 480% improvement of CO current densities compared to the monomer and neutral nanosheets, respectively. Additionally, the iCONs structure can accommodate the cationic moieties. In a flow cell, CoTAP-iCONs attain a very small onset overpotential of 40 mV and a stable total current density of 212 mA cm –2 with CO Faradaic efficiency of >95% at –0.6 V for 11 h. Further coupling the flow electrolyzer with commercial solar cells yields a solar-to-CO conversion efficiency of 13.89%. Finally, this work indicates that atom-thin, ionic nanosheets represent a promising structure for achieving both tailored activity and high stability.

36 MATERIALS SCIENCE↗

High Performance Electrocatalytic Reaction of Hydrogen and Oxygen on Ruthenium Nanoclusters

The development of catalytic materials for the hydrogen oxidation, hydrogen evolution, oxygen reduction or oxygen evolution reactions with high reaction rates and low overpotentials are key goals for the development of renewable energy. We report here Ru(0) nanoclusters supported on nitrogen-doped graphene as high-performance multifunctional catalysts for the hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR), showing activities similar to that of commercial Pt/C in alkaline solution. For HER performance in alkaline media, sample Ru/NG-750 reaches 10 mA cm-2 at an overpotential of 8 mV with a Tafel slope of 30 mV dec-1. The high HER performance in alkaline solution is advantageous because most catalysts for ORR and oxygen evolution reaction (OER) also prefer alkaline solution environment whereas degrade in acidic electrolytes. For ORR performance, Ru/NG effectively catalyzes the conversion of O2 into OH- via a 4e process at a current density comparable to that of Pt/C. The unusual catalytic activities of Ru(0) nanoclusters reported here are important discoveries for the advancement of renewable energy conversion reactions.

36 MATERIALS SCIENCE↗

Intrinsic and extrinsic defects in a family of coal-derived graphene quantum dots

In this letter, we report on the high frequency (239.2 and 336 GHz) electron spin resonance (ESR) studies performed on graphene quantum dots (GQDs), prepared through a wet chemistry route from three types of coal: (a) bituminous, (b) anthracite, and (c) coke; and from non-coal derived GQDs. The microwave frequency-, power-, and temperature-dependent ESR spectra coupled with computer-aided simulations reveal four distinct magnetic defect centers. In bituminous- and anthracite-derived GQDs, we have identified two of them as intrinsic carbon-centered magnetic defect centers (a broad signal of peak to peak width = 697 (10{sup −4} T), g = 2.0023; and a narrow signal of peak to peak width = 60 (10{sup −4} T), g = 2.003). The third defect center is Mn{sup 2+} ({sup 6}S{sub 5/2}, 3d{sup 5}) (signal width = 61 (10{sup −4} T), g = 2.0023, A{sub iso} = 93(10{sup −4} T)), and the fourth defect is identified as Cu{sup 2+} ({sup 2}D{sub 5/2}, 3d{sup 9}) (g{sub ⊥} = 2.048 and g{sub ‖} = 2.279), previously undetected. Coke-derived and non-coal derived GQDs show Mn{sup 2+} and two-carbon related signals, and no Cu{sup 2+} signal. The extrinsic impurities most likely originate from the starting coal. Furthermore, Raman, photoluminescence, and ESR measurements detected no noticeable changes in the properties of the bituminous GQDs after one year. This study highlights the importance of employing high frequency ESR spectroscopy in identifying the (magnetic) defects, which are roadblocks for spin relaxation times of graphene-based materials. These defects would not have been possible to probe by other spin transport measurements.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗