Engineering topics
Publications and source records attributed to Yao, Tao.
This dataset contains single-nucleus RNA sequencing data from poplar (Populusspp.) roots under control and methyl jasmonate (MeJA) treatment conditions. It was generated to investigate cell type-specific stress responses and to establish a high-resolution transcriptomic atlas in a perennial woody species.
This dataset contains the stem RNA-seq data of Populus tremula x P. alba genotypes of RGA triple knockout. Populus genotypes in this study includes the empty vector control (EV, Cas9-19) and three independent RGA triple mutants, 267-17 (RGAX4KO_17), 267-2
This dataset contains hyperspectral imaging data collected at the Advanced Plant Phenotyping Laboratory (APPL) at Oak Ridge National Laboratory. Natural variants of Populus trichocarpa were imaged using a high-throughput hyperspectral phenotyping pipeline to quantify spectral reflectance traits for downstream quantitative genetics analyses. The dataset includes hyperspectral image files and derived reflectance data products suitable for extracting spectral features across the measured wavelength range (e.g., VNIR and/or SWIR, depending on instrument configuration), along with associated sample metadata (e.g., genotype identifiers, experimental design factors, and imaging run identifiers). These data were generated to support analyses of broad-sense heritability of hyperspectral traits and their relationships with biochemical phenotypes (including lignin traits from Py-MBMS).
Select leaves from natural variants of Poplar (Populus Trichocarpa) grown in a greenhouse at Oak Ridge National Laboratory were analyzed by Pyrolysis-Molecular Beam Mass Spectrometry (Py-MBMS). Leaves were harvested, cryomilled and kept frozen until analysis. Py-MBMS analysis was conducted using approximately 4 mg of biomass and each sample was analyzed in duplicate. A Frontier PY2020 unit pyrolyzed samples at 500°C for 30 s in 80 µL deactivated stainless steel cups. An Extrel Super-Sonic MBMS Model Max 1000 was used to collect mass spectral data fromm/z30 to 450 at 17 eV and processed using Merlin Automation software (V3). Spectral ion intensities were normalized to the total ion chromatogram signal for each sample for analysis of spectral variance. Lignin content (wt %) was estimated based on relative responses from standards of known Klason lignin content using mean-normalized ion intensities ofm/z120, 124 (G), 137 (G), 138 (G), 150 (G), 152, 154 (S), 164 (G), 167 (S), 168 (S), 178 (G), 180, 181, 182 (S), 194 (S), 208 (S) and 210 (S) where G indicates guaiacyl-derived ions, S indicates syringyl-derived ions, and other ions either derive from other lignin monomers or multiple sources. Ratios of S and G lignin monomer units (S/G) were obtained by dividing the sum of S-based ions by the sum of G-based ions using mean-normalized ion intensities.
Stem tissues from the hybrid poplarPopulus tremula × P. albaclone 717-1B4 and from lectin receptor-like kinase overexpression lines PP7 and PP19 were individually colonized with the ectomycorrhizal fungiLaccaria bicolorstrain S238N,Hyaloscypha finlandicastrain PMI746, orUmbelopsis vinaceastrain PMI3018, as well as with a mixed fungal inoculum; non-inoculated plants served as controls. Plants were grown in a greenhouse at Oak Ridge National Laboratory and harvested in January 2025. Stem samples were analyzed using Pyrolysis–Molecular Beam Mass Spectrometry (Py-MBMS). Stems were harvested, debarked, dried, milled, destarched and ethanol extracted prior to analysis. Py-MBMS analysis was conducted using approximately 4 mg of wood from biomass and each sample was analyzed in duplicate. A Frontier PY2020 unit pyrolyzed samples at 500°C for 30 s in 80 µL deactivated stainless steel cups. An Extrel Super-Sonic MBMS Model Max 1000 was used to collect mass spectral data fromm/z30 to 450 at 17 eV and processed using Merlin Automation software (V3). Spectral ion intensities were normalized to the total ion chromatogram signal for each sample for analysis of spectral variance. Lignin content (wt %) was estimated based on relative responses from standards of known Klason lignin content using mean-normalized ion intensities ofm/z120, 124 (G), 137 (G), 138 (G), 150 (G), 152, 154 (S), 164 (G), 167 (S), 168 (S), 178 (G), 180, 181, 182 (S), 194 (S), 208 (S) and 210 (S) where G indicates guaiacyl-derived ions, S indicates syringyl-derived ions, and other ions either derive from other lignin monomers or multiple sources. Ratios of S and G lignin monomer units (S/G) were obtained by dividing the sum of S-based ions by the sum of G-based ions using mean-normalized ion intensities.
Plants respond to abiotic stresses such as drought, heat, and salinity through both shared and stress-specific regulatory pathways. However, the role of epigenetic mechanisms, particularly DNA methylation, in modulating these responses is still underexplored. Here, we integrated transcriptome profiling with whole-genome bisulfite sequencing (WGBS) to investigate the dynamic relationship between gene expression and DNA methylation in Populus trichocarpa during brief early-stage exposure to abiotic stress. Each stress elicited distinct transcriptional and methylation signatures; however, a subset of conserved stress-responsive genes was commonly regulated across treatments. Approximately 5% of differentially expressed genes also displayed differential methylation patterns, suggesting a coordinated role for DNA methylation in regulating gene expression. Motif enrichment analysis of differentially methylated regions revealed binding sites of key transcription factor families, including ERF, bHLH, and ABF, highlighting potential role for methylation in modulating transcription factor targeting. Furthermore, we identified stress-inducible molecular markers with potential applications in early stress detection and functional dissection of gene regulatory pathways. Together, these findings provide new insights into the coordinated genetic and epigenetic responses to abiotic stress and provide a foundation for developing biosensors and breeding strategies to enhance stress resilience woody plants.
In plants, the pre-mRNA alternative splicing has been demonstrated to be a crucial tier that regulates gene expression in response to salt stress. However, the underlying mechanisms remain elusive. Here, in this study, we studied the roles of DIGEORGE-SYNDROME CRITICAL REGION 14-like (AtDGCR14L) in regulating pre-mRNA splicing and salt stress tolerance. We discovered that Arabidopsis AtDGCR14L is required for maintaining plant salt stress tolerance and the constitutively spliced and active isoforms of important stress- and/or abscisic acid (ABA)-responsive genes. We also identified the interaction between AtDGCR14L and splicing factor U1-70k, which needs a highly conserved three amino acid (TWG) motif in DGCR14. Different from wild-type AtDGCR14L, the overexpression of TWG-substituted AtDGCR14L mutant did not change salt stress tolerance or pre-mRNA splicing of stress/ABA-responsive genes. Additionally, SWITCH3A (SWI3A) is a core subunit of the SWI/SUCROSE NONFERMENTING (SWI/SNF) chromatin-remodeling complexes. We found that SWI3A, whose splicing depends on AtDGCR14L, actively enhances salt stress tolerance. These results revealed that AtDGCR14L may play an essential role in crosstalk between plant salt-stress response and pre-mRNA splicing mechanisms. We also unveiled the potential role of SWI3A in controlling salt stress tolerance. The TWG motif in the intrinsically disordered region of AtDGCR14L is highly conserved and crucial for DGCR14 functions.
The aim of this study was to identity variation in drought tolerance across genotypes of Populus deltoides, Populus trichocarpa, and hybrids of the two species. A panel of 102 Populus genotypes, comprising 37 genotypes of P. trichocarpa, 37 of P. deltoides and 28 unique hybrid genotypes (P. trichocarpa x P. deltoides and P. deltoides x P. trichocarpa) were evaluated in the greenhouse under two treatments, well-watered (WW) and drought (DS). Plant physiological data were collected throughout the experiment once the drought treatment began. Throughout the experiment, we tracked soil volumetric water content, pot weight, stomatal conductance, quantum yield of photosystem II, and electron transport rate. In addition to those measurements, upon completion of the experiment, we assessed above and belowground plant biomass, plant height and stem diameter, leaf number, specific leaf area, relative water content, total protein, and total chlorophyll. We obtained hyperspectral signatures of one leaf from each plant at the end of the experiment. Columns BC – LL are hyperspectral averages for one leaf from each plant at each wavelength as described in the column header.
This dataset contains the phenotypic measurements of Populus genotypes selected for genomic selection and breeding program. Populus species in this study includes P. trichocarpa, P. deltoides and a hybrid between these two species.
Plant biodesign requires the knowledge of DNA parts (e.g., genes, promoters, terminators), along with their combinations (as gene constructs) linked to engineered traits. DNA parts with validated or predicted functions in plants have been deposited in various online databases. However, these existing databases focus on basic biological functions of individual DNA parts, leaving a gap between basic knowledge and bioengineering applications. To fill this knowledge gap, we have created a user-friendly, open-ended database as a knowledge graph linking DNA parts to gene constructs to traits. This database contains experimentally validated DNA parts and gene constructs documented in peer-reviewed publications. The DNA parts include 1) molecular components with biological functions, such as genes involved in various biological processes (e.g., metabolic and signal transduction pathways) and 2) molecular components with technical functions, such as gene expression, genome engineering and sequence splicing. The gene constructs deposited in this database include both single-gene and multi-gene constructs. This database allows users to submit DNA parts and gene construct compositions linked to engineered traits described in peer-reviewed publications, providing a public digital repository for sharing the biodesign information among the researchers in the fields of plant biotechnology and plant synthetic biology.