Engineering Papers⌕ Search

Engineering topics

Yang, Ying

Publications and source records attributed to Yang, Ying.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Creep behavior of an additively manufactured 9Cr steel in the as-built condition

Limited studies have evaluated the creep behavior of additively manufactured (AM) ferritic-martensitic (FM) steels. This work investigated the creep behavior of a 9Cr FM steel fabricated by powder blown directed energy deposition (DED) technique. Here, the creep testing at 550–650 °C and 150 MPa for the specimens along the deposition direction in the as-built condition, together with corresponding microstructural characterization, revealed a threshold temperature between 600 and 625 °C, below which the steel has creep resistance comparable with Grade 91 cross-welds and noticeably greater than 9Cr-1Mo steel. The threshold temperature distinguishes the creep behavior in two regimes differentiated in creep activation energy, creep deformation, and failure mechanism. Unlike the creep rupture surface ~45° from the loading direction when tested above the threshold temperature, the creep rupture for testing below the threshold temperature resembles type IV failure in the cross-welds of ferritic steels. The DED-induced layer structure in the as-built steel played a significant role on the change of creep behavior.

36 MATERIALS SCIENCE↗
DOE OSTI2022

On the high-temperature stability of the Al 8 Cu 3 Ce intermetallic in an additively manufactured Al-Cu-Ce-Zr alloy

High-temperature resistant eutectic Al alloys are crucial materials for lightweight and energy efficient design in the automotive and aviation industries. Additive manufacturing offers a pathway to refine eutectic microstructures and develop novel alloys with superior high-temperature strength. High-volume fraction intermetallic Al-Cu-Ce alloys have been developed to deliver high-temperature strength in combination with reduced hot-tearing susceptibility. Zr is added to provide additional strengthening via nanoscale Al 3 Zr precipitation, and to stabilize and avoid coarsening of the Al 8 Cu 3 Ce phase. However, the detailed interaction between Zr and Al 8 Cu 3 Ce remains unexplored. In this work, we show with synchrotron X-ray diffraction that laser powder bed fusion fabricated Al-Cu-Ce and Al-Cu-Ce-Zr alloys contain predominantly the Al 8 Cu 3 Ce intermetallic in the as-fabricated condition. Heat treatment of the Al-Cu-Ce alloy results in the Al 8 Cu 3 Ce → Al 8 Cu 4 Ce phase transformation. In the Al-Cu-Ce-Zr alloy, minor fractions of (Al,Cu,Si) 4 Ce and Al 2 Cu-θ are found in the as-fabricated condition, while Al 8 Cu 3 Ce remains stable during heat treatment. Atom probe microscopy quantifies intermetallic stoichiometries and reveals how Zr is enriched at the Al-matrix/Al 8 Cu 3 Ce interface acting as a diffusion barrier against solute exchange. Calibrated thermodynamic modeling underpins this as a kinetic effect. Here, a qualitative microstructural model summarizes, how Zr stabilizes Al 8 Cu 3 Ce against phase transformations and coarsening.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evidence of a room-temperature quantum spin Hall edge state in a higher-order topological insulator

Room-temperature realization of macroscopic quantum phases is one of the major pursuits in fundamental physics. The quantum spin Hall phase is a topological quantum phase that features a two-dimensional insulating bulk and a helical edge state. Here we use vector magnetic field and variable temperature based scanning tunnelling microscopy to provide micro-spectroscopic evidence for a room-temperature quantum spin Hall edge state on the surface of the higher-order topological insulator Bi 4 Br 4 . Here, we find that the atomically resolved lattice exhibits a large insulating gap of over 200 meV, and an atomically sharp monolayer step edge hosts an in-gap gapless state, suggesting topological bulk–boundary correspondence. An external magnetic field can gap the edge state, consistent with the time-reversal symmetry protection inherent in the underlying band topology. We further identify the geometrical hybridization of such edge states, which not only supports the Z 2 topology of the quantum spin Hall state but also visualizes the building blocks of the higher-order topological insulator phase. Our results further encourage the exploration of high-temperature transport quantization of the putative topological phase reported here.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Astragaloside IV improved antioxidative stress capacity and related gene expression of the Keap1‐Nrf2 pathway in grass carp ( Ctenopharyngodon idella ) hepatocytes under heat stress

Abstract This study aims to investigate the protective effects of astragaloside IV (AS‐IV) on the hepatocytes of grass carp ( Ctenopharyngodon idella ) on heat stress. Cultured cells were treated with AS‐IV (0, 50, 100 and 200 μg/ml) at 28°C for 24 h and then exposed to heat stress by increasing the culturing temperature (32 ± 0.5°C) for 6 h. The increased temperatures significantly reduced cell viability and superoxide dismutase (SOD) activity, and increased malondialdehyde (MDA) levels in the 0 μg/ml AS‐IV treatment group at 32°C, but the grass carp hepatocytes treated with 100 and 200 μg/ml AS‐IV had significantly increased cell viability and SOD activity and decreased MDA levels. The mRNA levels of keap1a , keap1b , nrf2 , gsh‐px , cat , cu‐zn sod , mgst1 and il‐6 were significantly lower in the 0 μg/ml AS‐IV treatment group at 32°C, while those of keap1a , nrf2 , gsh‐px , cat , cu‐zn sod , gstp1 , ho‐1 and il‐6 were significantly higher in cells treated with 100 or 200 μg/ml AS‐IV. Our findings indicate that AS‐IV could enhance the antioxidative stress capacity of grass carp hepatocytes under heat stress, and its mechanism may be associated with the activation of the Keap1‐Nrf2 pathway. Thus, these results provide new insights into how to alleviate heat stress in grass carp.

Liu, Hua↗
DOE OSTI2022

Carbon-efficient conversion of natural gas and natural-gas condensates to chemical products and intermediate feedstocks via catalytic metal–organic framework (MOF) chemistry

The net-zero carbon emission scenario of stopping hydrocarbon use as fuel is unlikely to end the extraction of fossil hydrocarbons. Remaining will be a sizable need for hydrocarbons as feedstocks for commodity chemicals destined for transformation into polymers, manufacturing-relevant intermediates, and value-added chemicals. Historically, the primary feedstock source has been oil. Over the past dozen years, however, fracking-based extraction of shale-trapped natural gas from known enormous reserves, in North America, has resulted in feedstock sourcing instead from wet shale gas. This shift has transformed the catalytic chemistry of commodity chemical manufacturing. In this paper, following a brief discussion of the merits and limitations of crystallographically well-defined metal–organic frameworks (MOFs) as model catalysts and catalyst-supports, we examined their applications for understanding and potentially enabling carbon-economical, catalytic transformation of C 1 , C 2 , C 3 , and C 4 components of natural gas to desirable commodity chemicals, intermediates, or model compounds.

03 NATURAL GAS↗
DOE OSTI2022

Engineering Interlayer Electron–Phonon Coupling in WS 2 /BN Heterostructures

In van der Waals (vdW) heterostructures, the interlayer electron–phonon coupling (EPC) provides one unique channel to nonlocally engineer these elementary particles. However, limited by the stringent occurrence conditions, the efficient engineering of interlayer EPC remains elusive. Here we report a multitier engineering of interlayer EPC in WS2/boron nitride (BN) heterostructures, including isotope enrichments of BN substrates, temperature, and high-pressure tuning. The hyperfine isotope dependence of Raman intensities was unambiguously revealed. In combination with theoretical calculations, we anticipate that WS2/BN supercells could induce Brillouin-zone-folded phonons that contribute to the interlayer coupling, leading to a complex nature of broad Raman peaks. We further demonstrate the significance of a previously unexplored parameter, the interlayer spacing. By varying the temperature and high pressure, we effectively manipulated the strengths of EPC with on/off capabilities, indicating critical thresholds of the layer–layer spacing for activating and strengthening interlayer EPC. Our findings provide new opportunities to engineer vdW heterostructures with controlled interlayer coupling.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

The CALPHAD approach for HEAs: Challenges and opportunities

Phases are key microstructural features that determine material properties. The most intuitive way of representing phase stability in a material is by its phase diagram. The vastness of the composition space is the most compelling reason for investigating high-entropy alloys (HEAs), but it also creates major challenges in controlling phases and microstructures of HEAs due to lack of experimental phase diagrams in highly concentrated multicomponent space. The CALPHAD (Calculation of Phase Diagram) approach, although it needs improvements, is the only viable way to calculate multicomponent phase diagrams. The two major property databases in CALPHAD, Gibbs energy and mobility, when coupled, can provide not only the equilibrium phase information, but also information about diffusion and kinetics. In this article, we will review the use of the CALPHAD approach in understanding phase stability and diffusion in high-entropy alloys. Finally, we will discuss the notable trend of coupling the high-throughput CALPHAD approach with machine learning in HEA design.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ta-containing Fe-Ni based superalloys with high strength and oxidation resistance for high-temperature applications

A Fe—Ni based alloy comprising, in weight percent: Ni 30-35; Cr 12-14; Al 3-5; Ti 0-2; Ta 2-8; C<=0.05; B<=0.005; Zr<=0.2; Si<0.5; where Cr/(Cr+Fe+Ni)=0.125-0.145; Al/(Al+Ti+Ta)=0.15-0.5; and Fe≥Ni; balance Fe, the alloy having a face-centered cubic (fcc) matrix with from 25 to 30 vol. % of L12-type γ′-Ni3M (M=Al, Ta, Ti and mixtures thereof) precipitates.

Yang, Ying↗
DOE OSTI2022

Effect of laser scanning speed on the microstructure, phase transformation and mechanical property of NiTi alloys fabricated by $\mathrm{LPBF}$

This study investigated the effects of laser scanning speed on the microstructure, phase transformation and properties of NiTi alloys fabricated by laser powder bed fusion (LPBF). In this study, the contributions of metallurgical factors under different scanning speeds, such as Ni evaporation, Ni4Ti3 precipitation, dislocations and internal stress, to the transformation temperature and transformation latent heat were clarified through specially designed experiments. Ni evaporation is found to have the most profound effect, followed by precipitation. Increasing scanning speed is found to reduce Ni loss, thus cause less increase in the transformation temperature and transformation heat of the LPBF-NiTi alloys. Increasing scanning speed also increases the microstructure non-uniformity and thus widens the transformation temperature interval. The orientations of residual stress exhibit strong crystallographic stiffness dependence. The LPBF-NiTi alloys with different scanning speeds all exhibited high strains (>13.4%) and excellent shape memory effect. A LPBF-NiTi honeycomb structure exhibited 96% shape recovery rate after a 60% pre-compressive deformation. Besides, there is an optimum scanning speed for minimum porosity and smallest average pore size. However, the pore structure is found to have weak influence on the tensile behaviour of the LPBF-NiTi alloys, possibly due to the high defect tolerance of the martensitic transformation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A creep-resistant additively manufactured Al-Ce-Ni-Mn alloy

Existing additively manufactured aluminum alloys exhibit poor creep resistance due to coarsening of their strengthening phases and refined grain structures. In this paper, we report on a novel additively manufactured Al-10.5Ce-3.1Ni-1.2Mn wt.% alloy which displays excellent creep resistance relative to cast high-temperature aluminum alloys at 300–400 °C. In this work, the creep resistance of this alloy is attributed to a high volume fraction (~35%) of submicron intermetallic strengthening phases which are coarsening-resistant for hundreds of hours at 350 °C. The results herein demonstrate that additive manufacturing provides opportunities for development of creep-resistant aluminum alloys that may be used in bulk form in the 250–400 °C temperature range. Pathways for further development of such alloys are identified.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Data Mining and Visualization of High-Dimensional ICME Data for Additive Manufacturing

Integrated computational materials engineering (ICME) methods combining CALPHAD with process-based simulations can produce rich, high-dimensional data for alloy and process design. In ICME methods for metallurgical applications, the visualization and interpretation of such high-dimensional data has previously been through heat maps represented in 2 or 3 dimensions. While such an approach is ideal when one variable is varied at a time, in the case of high-dimensional data with multiple variables varied simultaneously, as is the case in additive manufacturing, interpreting the trends through two- or three-dimensional heat maps becomes challenging. Here, we propose a strategy of mixed visual data mining and quantitative analysis for high-dimensional metallurgical and process data using high-throughput thermodynamic calculations. Two case studies show the application of the proposed approach. The first case study investigated the effects of feedstock chemistry on the δ ferrite formation in 316L stainless steel powders used for binder jet additive manufacturing. The second case study linked Scheil–Gulliver calculations to a process model for dissimilar joining of aluminum alloys 5356 and 6111 during laser hot-wire additive manufacturing. Both cases contained thousands of calculated data points, showcasing the utility of visual data analysis through parallel coordinate plotting, Pearson correlation coefficient matrices, and scatter matrices compared to traditional process maps. These visualization techniques can be extended to many additive manufacturing problems to capture process–structure–property relationships for additively manufactured components.

36 MATERIALS SCIENCE↗
DOE OSTI2022

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. Here, this review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗