Engineering Papers⌕ Search

Engineering topics

Yang, Yang

Publications and source records attributed to Yang, Yang.

At least 19 records

Machine learning-based bias-corrected future projections of ozone concentrations from a chemistry-climate model

Reliable projection of future near-surface ozone is crucial for air quality management and health risk assessment. However, potential biases in spatial distribution, magnitude and trends in ozone concentrations simulated by global chemistry-climate models limit their applicability in regional-scale evaluations. In this study, LightGBM, a machine learning (ML) algorithm is applied to correct biases in CESM2-simulated ozone concentrations over China, the United States and Europe and calibrate future ozone projections under two diverse Shared Socioeconomic Pathways (SSP1-2.6 and SSP5-8.5) scenarios from 2020 to 2060. The ML-based correction significantly improves the spatial distribution and reduces the model bias by 40%–60%. It also reverses the potentially incorrect trend of ozone change under SSP1-2.6 in eastern China. When applying ML-based bias correction to CESM2 future projections, warm season mean ozone concentrations decrease across China, the United States, and Europe by –13.5, –17.9, and –13.7 µg/m³, respectively, between 2020 and 2060 in SSP1-2.6, while they increase by 9.4, 2.0, and 5.2 µg/m³ in SSP5-8.5. Decomposition analysis show that changes in anthropogenic emissions dominate future ozone changes in both scenarios, while strong climate penalty from ozone changes occurs in polluted eastern China and climate benefit is found in western China, the United States and Europe under SSP5-8.5. These findings demonstrate the value of combining ML with chemistry-climate models to produce more accurate air quality projections, thereby informing more effective and region-specific environmental protection strategies.

Chemistry Model↗

Populus PtrbHLH011 Is a Transcriptional Co‐Regulator Involved in the Activation of Cell Wall Biosynthesis by Iron Deprivation

The lack of a mechanistic understanding of the environmental plasticity of secondary cell wall (SCW) biosynthesis restricts large-scale biomass and bioenergy production on marginal lands. Using Populus (poplar), a key bioenergy crop, we discovered that iron deprivation, a prevalent abiotic stress on marginal lands, stimulates SCW biosynthesis in stems. We identified the transcription factor PtrbHLH011 as a critical regulator underlying this response. Through integrated analyses involving phenotypic characterisation of PtrbHLH011 knockout and overexpression plants, functional genomics and molecular investigations, we established that PtrbHLH011 functions as a central regulator of SCW biosynthesis, iron homeostasis and flavonoid biosynthesis by directly repressing essential genes in these pathways. Iron deprivation downregulates PtrbHLH011 expression, subsequently activating these biosynthetic pathways. Notably, cytosine base editing-based knockout of PtrbHLH011 significantly enhanced plant growth, yielding up to a 110% increase in stem diameter and a 300% increase in leaf iron content. These findings present a novel regulatory mechanism linking environmental iron availability to SCW biosynthesis and illustrate a practical strategy to improve biomass yield on iron-deficient marginal lands. Furthermore, our mechanistic insights into PtrbHLH011 target recognition and regulation provide a valuable foundation for precise manipulation of gene regulatory networks, facilitating the development of high-performance bioenergy crops adapted to marginal environments.

59 BASIC BIOLOGICAL SCIENCES↗

Intensifying heat extremes in China attributed to rising greenhouse gases and declining aerosols since the 2010s

Rising temperatures have increased the frequency, duration, and intensity of extreme temperature events over China in recent decades. The upward trends in heat extremes in China in the warm season (May–September) and their relationships with changes in aerosols and greenhouse gases are investigated using observations, reanalysis data and model results. Significant increasing trends in China are observed in daily maximum temperatures (TXx), heatwave frequency, and heatwave mean duration during 2011–2023, with increasing rates of 0.70 °C/decade, 3.77 d/decade and 0.31 d/event/decade, respectively. This study shows that 43 ± 3% of the TXx increases in China are attributed to the rising CO2 concentrations. Aerosol optical depth in China decreased at a rate of 0.054 per decade from 2011 to 2023 due to significant air quality improvements. The weakened aerosol cooling effect due to declining aerosols contributes 27 ± 3% to the observed TXx trend. In eastern China, where aerosol reductions were most significant, aerosol reduction even accounts for 79 ± 10% of the TXx increasing trend. The intensifying heat waves attributed to GHGs and aerosols are in accordance with the increasing extreme high temperatures. The results highlight the significant impacts of rising GHGs and decreasing aerosols on heat extreme events over China in recent years, emphasizing the need of considering both GHGs and aerosols to address the issue of intensification of heat extremes in a warming future.

Zou, Aili↗

Source attribution of near-surface ozone pollution in Jiangsu Province of China over 2013–2019

Near-surface ozone (O3) is one of the most severe air pollutants in China, particularly over densely populated Jiangsu Province in the Yangtze River Delta. In this study, an O3 source tagging technique is utilized in a chemistry-climate model to quantify the source contributions of various emission sectors and regions for nitrogen oxides (NOx) and volatile organic compounds (VOCs) to O3 concentrations in Jiangsu Province during 2013–2019. The results show that the near-surface O3 in Jiangsu Province is mainly contributed by surrounding and remote anthropogenic NOx emissions through long-range transport. Local anthropogenic NOx emissions account for only 13 % and 18 % of the annual and summertime mean near-surface O3 in Jiangsu Province, respectively. Anthropogenic NOx emissions from the surface transportation, industry, and energy sectors account for 21 %, 22 % and 20 % of the annual mean near-surface O3 concentration in Jiangsu Province, respectively. Biogenic and anthropogenic VOCs emissions each explains one-third of the annual mean near-surface O3 concentration in Jiangsu, while methane and stratospheric chemical production contribute 21 % and 6 %, respectively. The sources from stratospheric production, aircraft, lightning, and foreign emissions are the primary contributors to O3 in the mid- and high troposphere. During high pollution days in Jiangsu Province, the near-surface O3 concentrations increase with the maximum exceeding 20 ppb, which is attributed to both the enhanced photochemical production and regional transport in favorable meteorological conditions.

ozone pollution↗

A High-Order Eulerian–Lagrangian Runge–Kutta Finite Volume (EL–RK–FV) Method for Scalar Nonlinear Conservation Laws

Abstract We present a class of high-order Eulerian–Lagrangian Runge–Kutta finite volume methods that can numerically solve Burgers’ equation with shock formations, which could be extended to general scalar conservation laws. Eulerian–Lagrangian (EL) and semi-Lagrangian (SL) methods have recently seen increased development and have become a staple for allowing large time-stepping sizes. Yet, maintaining relatively large time-stepping sizes post shock formation remains quite challenging. Our proposed scheme integrates the partial differential equation on a space-time region partitioned by linear approximations to the characteristics determined by the Rankine–Hugoniot jump condition. We trace the characteristics forward in time and present a merging procedure for the mesh cells to handle intersecting characteristics due to shocks. Following this partitioning, we write the equation in a time-differential form and evolve with Runge–Kutta methods in a method-of-lines fashion. High-resolution methods such as ENO and WENO-AO schemes are used for spatial reconstruction. Extension to higher dimensions is done via dimensional splitting. Numerical experiments demonstrate our scheme’s high-order accuracy and ability to sharply capture post-shock solutions with large time-stepping sizes.

Chen, Jiajie↗

Peptide programming of supramolecular vinylidene fluoride ferroelectric phases

Ferroelectric structures have spontaneous macroscopic polarization that can be inverted using external electric fields and have potential applications including information storage, energy transduction, ultralow-power nanoelectronics and biomedical devices. These functions would benefit from nanoscale control of ferroelectric structure, the ability to switch polarization with lower applied fields (low coercive field) and biocompatibility. Soft ferroelectrics based on poly(vinylidene fluoride) (PVDF) have a thermodynamically unstable ferroelectric phase in the homopolymer, complex semi-crystalline structures, and high coercive fields. Here, in this work, we report on ferroelectric materials formed by water-soluble molecules containing only six VDF repeating units covalently conjugated to a tetrapeptide, with the propensity to assemble into the β-sheet structures that are ubiquitous in proteins. This led to the discovery of ribbon-shaped ferroelectric supramolecular assemblies that are thermodynamically stable with their long axes parallel to both the preferred hydrogen-bonding direction of β-sheets and the bistable polar axes of VDF hexamers. Relative to a commonly used ferroelectric copolymer, the biomolecular assemblies exhibit a coercive field that is two orders of magnitude lower, as the result of supramolecular dynamics, and a similar level of remnant polarization, despite having a peptide content of 49 wt%. Furthermore, the Curie temperature of the assemblies is about 40 °C higher than that of a copolymer containing a similar amount of VDF. This supramolecular system was created using a biologically inspired strategy that is attractive in terms of sustainability and that could lead to new functions for soft ferroelectrics.

36 MATERIALS SCIENCE↗

Integrated rocksalt–polyanion cathodes with excess lithium and stabilized cycling

Co- and Ni-free disordered rocksalt cathodes utilize oxygen redox to increase the energy density of lithium-ion batteries, but it is challenging to achieve good cycle life at high voltages >4.5 V (versus Li/Li + ). Here, in this study, we report a family of Li-excess Mn-rich cathodes that integrates rocksalt- and polyanion-type structures. Following design rules for cation filling and ordering, we demonstrate the bulk incorporation of polyanion groups into the rocksalt lattice. This integration bridges the two primary families of lithium-ion battery cathodes—layered/spinel and phosphate oxides—dramatically enhancing the cycling stability of disordered rocksalt cathodes with 4.8 V upper cut-off voltage. The cathode exhibits high gravimetric energy densities above 1,100 Wh kg -1 and >70% retention over 100 cycles. This study opens up a broad compositional space for developing battery cathodes using earth-abundant elements such as Mn and Fe.

36 MATERIALS SCIENCE↗

Capacity Fade of Graphite/NMC811: Influence of Particle Morphology, Electrolyte, and Charge Voltage

LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) is an important Li-ion battery cathode material; however, there is a tradeoff between delivered capacity and capacity retention. As the charge potential increases the capacity rises but at the expense of capacity retention. The decrease in capacity retention has been ascribed to several factors including particle cracking, surface reconstruction, transition metal dissolution, and electrolyte reactivity. The present study compares 4.1 and 4.3 V charging limits in commercially relevant graphite/NMC811 pouch cells for single crystal (SC) and polycrystalline (PC) NMC811 with ethylene carbonate (EC)-containing or EC-free electrolytes. The electrochemistry is rationalized through analysis of electrochemical impedance spectroscopy, positive electrode X-ray photoelectron spectroscopy, soft X-ray absorption spectroscopy, X-ray diffraction, and negative electrode mapping by X-ray fluorescence. Graphite/SC-NMC811 cells show high-capacity retention at 4.1 V but exhibit degradation at 4.3 V charging potentials. The EC-free electrolyte cells led to higher capacity fade, especially when charged to 4.3 V. Cathode dissolution and deposition on the negative electrode from PC-NMC811 cells was higher than for samples from SC-NMC811 cells. This study reveals the impact of material type, charge voltage, and electrolyte composition on the reactions at the positive electrode, their influence on the negative electrode, and evolution with cycle number.

36 MATERIALS SCIENCE↗

Ubiquitous short-range order in multi-principal element alloys

Recent research in multi-principal element alloys (MPEAs) has increasingly focused on the role of short-range order (SRO) on material performance. However, the mechanisms of SRO formation and its precise control remain elusive, limiting the progress of SRO engineering. Here, leveraging advanced additive manufacturing techniques that produce samples with a wide range of cooling rates (up to 10 7 K s –1 ) and an enhanced semi-quantitative electron microscopy method, we characterize SRO in three CoCrNi-based face-centered-cubic (FCC) MPEAs. Surprisingly, irrespective of the processing and thermal treatment history, all samples exhibit similar levels of SRO. Atomistic simulations reveal that during solidification, prevalent local chemical order arises in the liquid-solid interface (solidification front) even under the extreme cooling rate of 10 11 K s –1 . This phenomenon stems from the swift atomic diffusion in the supercooled liquid, which matches or even surpasses the rate of solidification. Therefore, SRO is an inherent characteristic of most FCC MPEAs, insensitive to variations in cooling rates and even annealing treatments typically available in experiments.

36 MATERIALS SCIENCE↗

Dynamic Bubbling Balanced Proactive CO 2 Capture and Reduction on a Triple-Phase Interface Nanoporous Electrocatalyst

The formation and preservation of the active phase of the catalysts at the triple-phase interface during CO 2 capture and reduction is essential for improving the conversion efficiency of CO 2 electroreduction toward value-added chemicals and fuels under operational conditions. Designing such ideal catalysts that can mitigate parasitic hydrogen generation and prevent active phase degradation during the CO 2 reduction reaction (CO 2 RR), however, remains a significant challenge. Herein, we developed an interfacial engineering strategy to build a new SnO x catalyst by invoking multiscale approaches. This catalyst features a hierarchically nanoporous structure coated with an organic F-monolayer that modifies the triple-phase interface in aqueous electrolytes, substantially reducing competing hydrogen generation (less than 5%) and enhancing CO 2 RR selectivity (~90%). This rationally designed triple-phase interface overcomes the issue of limited CO 2 solubility in aqueous electrolytes via proactive CO 2 capture and reduction. Concurrently, we utilized pulsed square-wave potentials to dynamically recover the active phase for the CO 2 RR to regulate the production of C1 products such as formate and carbon monoxide (CO). This protocol ensures profoundly enhanced CO 2 RR selectivity (~90%) compared with constant potential (~70%) applied at -0.8 V (V vs RHE). We further achieved a mechanistic understanding of the CO 2 capture and reduction processes under pulsed square-wave potentials via in situ Raman spectroscopy, thereby observing the potential-dependent intensity of Raman vibrational modes of the active phase and CO 2 RR intermediates. Finally, this work will inspire material design strategies by leveraging triple-phase interface engineering for emerging electrochemical processes, as technology moves toward electrification and decarbonization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unique impacts of strong and westward-extended western Pacific subtropical high on ozone pollution over eastern China

As a subtropical anticyclonic high-pressure system that typically forms over the northwestern Pacific Ocean in summer, the Western Pacific subtropical high (WPSH) affects meteorological conditions and ozone pollution in China. The relationship between maximum daily 8-h average ozone (MDA8 O 3 ) concentrations and the extremely strong and westward-extended WPSH occurred in 2022 is investigated using observations, reanalysis data and GEOS-Chem model simulations. The intensity of WPSH has a significant positive correlation with MDA8 O3 over southern China during July-August in 2022, with a correlation coefficient of +0.44, but the correlation is negative (–0.40) in northern China. During the strong WPSH days, MDA8 O 3 increased by 16.5µgm -3 (16.4% relative to July-August average) over southern China and decreased by 19.0µgm -3 (14.5%) in northern China compared to the weak WPSH days. The unique dipole pattern in the relationship between ozone levels and the WPSH in 2022 exhibited a contrast to that during 2015–2021. The difference is primarily due to the extremely strong WPSH intensity and its unusual westward expansion in 2022. In this case, an anomalous anticyclone at 500 hPa dominates over southern China, which creates conditions conducive for ozone formation and accumulation. The anticyclone weakened horizontal winds and reduced the dispersion of ozone, alongside a high temperature and low relative humidity, which favored the chemical production of ozone. In contrast, abnormal northerly winds enhanced ozone diffusion in northern China and the low temperature reduced ozone chemical production. Here, this study reveals the mechanism for the significant impact of strong and westward-extended WPSH on ozone concentrations over China, emphasizing the role of the WPSH location in modulating meteorology and ozone levels.

54 ENVIRONMENTAL SCIENCES↗

Co-Benefits of Mitigating Aerosol Pollution to Future Solar and Wind Energy in China Toward Carbon Neutrality

The climate commitment to achieving carbon neutrality before 2060 in China has been announced recently. In the context of pursuing carbon neutrality, sharing similar sources as greenhouse gases, aerosol particle and precursor emissions are projected to substantially decrease in China, which can potentially have a great impact on climate. Here, we investigate the effects of future aerosol reductions, because of achieving carbon neutrality, on solar and wind energy in China by using an earth system model. We show that significant reductions in aerosol emissions, particularly in eastern China, lead to increases in the surface downwelling shortwave radiation, surface air temperature and wind speed, which can further enhance the potential of solar and wind energy production. The findings underline that the pursuit of carbon neutrality can yield co-benefits of not only mitigating climate change and air pollution but also fortifying the stability of renewable energy sources.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Direct extraction of lithium from ores by electrochemical leaching

With the rapid increase in lithium consumption for electric vehicle applications, its price soared during the past decade. To secure a reliable and cost-effective supply chain, it is critical to unlock alternative lithium extraction resources beyond conventional brine. In this study, we develop an electrochemical method to directly leach lithium from α-phase spodumene. We find the H 2 O 2 promoter can significantly reduce the leaching potential by facilitating the electron transfer and changing the reaction path. Upon leaching, β-phase spodumene shows a typical phase transformation to HAlSi 2 O 6 , while leached α-phase remains its original crystal phase with a lattice shrinkage. To demonstrate the scale-up potential of electrochemical leaching, we design a catalyst-modified high-throughput current collector for high loading of suspended spodumene, achieving a leaching current of 18 mA and a leaching efficiency of 92.2%. Electrochemical leaching will revolutionize traditional leaching and recycling processes by minimizing the environmental footprint and energy consumption.

25 ENERGY STORAGE↗

Global source apportionment of aerosols into major emission regions and sectors over 1850–2017

Anthropogenic emissions of aerosols and precursor gases have changed significantly in the past few decades around the world. In this study, the Explicit Aerosol Source Tagging (EAST) system is merged into the Energy Exascale Earth System Model version 1 (E3SMv1) to quantify the variations in anthropogenic aerosol concentrations, source contributions, and their subsequent radiative impact in four major emission regions across the globe during 1850–1980, 1980–2010, and 2010–2017. In North America and Europe, changes in anthropogenic PM 2.5 were mainly caused by changes in emissions from local energy and industrial sectors. The local industrial sector caused the largest increase in PM 2.5 in East Asia during 1980–2010 and decrease during 2010–2017. In South Asia, the increase in energy-related emissions dominated the rise in PM 2.5 levels during 1980–2017. During 1850–1980, the increases in emissions from North America contributed to the increase in the European PM 2.5 burden by 1.7 mg m -2 and the sources from the Europe were also responsible for the PM 2.5 burden increase in East Asia and South Asia by about 1.0 mg m -2 . During 1980–2010, East Asia contributed to an increase of 0.4–0.6 mg m -2 in the PM 2.5 burden in North America and Europe, while South Asia contributed about 0.3 mg m -2 . During 2010–2017, the contributions from East Asia to the PM 2.5 burdens in the North America, Europe, and South Asia declined by 0.3–0.6 mg m -2 due to the clean air actions in China, while the contributions from South Asia still increased due to the continuous increase in emissions in South Asia. The historical changes in aerosols had an impact on effective radiative forcing through aerosol–radiation interactions (ERF ari ). During 1980–2010, a decline in North American aerosols resulted in a positive ERF ari change (warming effect) in Europe and a decline in aerosols in Europe caused a warming effect in Russia and northern China. The changes in ERF ari from the increase and decrease in aerosols in China during 1980–2010 and 2010–2017, respectively, are comparable in magnitude. The continuous aerosol increases in South Asia from 1980 to 2017 resulted in negative ERF ari (cooling) changes in South Asia, Southeast Asia, and southern China.

54 ENVIRONMENTAL SCIENCES↗

Author Correction: Proton irradiation-decelerated intergranular corrosion of Ni-Cr alloys in molten salt

In the original version of this article, numbers for the beam current densities were incorrectly given as 1.5, 2.0, and 2.5 mA cm -2 in various locations, instead of the correct values 0.3, 0.4, and 0.5 mA cm -2 . This was owing to a measurement error coming from the indirect correspondence between the Faraday cup and the beam profile monitor (BPM) on the accelerator as the proton beam traveling along the beamline resulted in mismatching between calculated values and real beam currents, which were obtained by ex-situ calibration. The following changes have been made in the correct version. The eighth sentence of the Results, and the figure legend of Fig. 2j state '0.3, 0.4, 0.5 mA cm -2 ' in place of '1.5, 2.0, 2.5 mA cm -2 '. The figure legend of Fig. 1j–l states '0.5, 0.4, 0.3 mA cm -2 ' in place of '2.5, 2.0, 1.5 mA cm -2 '. Figure 1e states '0.5 mA cm -2 ' in place of '2.5 mA cm -2 ', Fig. 1h states '0.4 mA cm -2 ' in place of '2.0 mA cm -2 ', and Fig. 1k states ‘0.3 mA cm -2 ' in place of ‘1.5 mA cm -2 '. Figure 2c states '0.5 mA cm -2 ' in place of '2.5 mA cm -2 ', Fig. 2d states '0.4 mA cm -2 ' in place of '2.0 mA cm -2 ', and Fig. 2e states '0.3 mA cm -2 ' in place of '1.5 mA cm -2 '. Figure 2j and k states ‘0.3 mA cm -2 ', '0.4 mA cm -2 ', '0.5 mA cm -2 ' in place of '1.5 mA cm -2 ', '2.0 mA cm -2 ', and '2.5 mA cm -2 ', respectively. The figure legend of Fig. 3b states '0.4 mA cm -2 ' in place of '2.0 mA cm -2 '. The figure legend of Supplementary Fig. 1 states '0.5 mA cm -2 ' in place of '2.5 mA cm -2 '. This has been corrected in the PDF and HTML versions of the Article.

36 MATERIALS SCIENCE↗