Engineering Papers⌕ Search

Engineering topics

Yang, Xu

Publications and source records attributed to Yang, Xu.

At least 55 records · Page 3

Designing Morphotropic Phase Composition in BiFeO 3

In classical morphotropic piezoelectric materials, rhombohedral and tetragonal phase variants can energetically compete to form a mixed phase regime with improved functional properties. Even though the discovery of morphotropic-like phases in multiferroic BiFeO 3 films has broadened this definition, accessing these phase spaces is still typically accomplished through isovalent substitution or heteroepitaxial strain which do not allow for continuous modification of phase composition postsynthesis. In this work, we show that it is possible to use low-energy helium implantation to tailor morphotropic phases of epitaxial BiFeO 3 films postsynthesis in a continuous and iterative manner. Applying this strain doping approach to morphotropic films creates a new phase space based on internal and external lattice stress that can be seen as an analogue to temperature–composition phase diagrams of classical morphotropic ferroelectric systems.

36 MATERIALS SCIENCE↗

Efficient Recovery of Copper and Cobalt from the Matte–Slag Mixture of ISA Furnace by Injection of Coke and Pyrite

During ISA copper smelting process, ISASMELT furnace discharges a large amount of matte and slag mixture and the separation of them has an important influence on the recovery of valuable metals. This paper presented a reduction-sulfurization sedimentation process for recovering copper and cobalt from the matte–slag mixture of ISA furnace. Firstly, matte–slag mixture and traditional static sedimentation slag are characterized to determine their mineral composition and occurrence state. It indicates that Cu is primarily lost in slag in the form of sulfide, while Co is mostly lost in the form of oxide. With coke and pyrite as the reducing agent and vulcanizing agent, an orthogonal laboratory experiment was conducted to determine the effects of the smelting temperature and additive dosage on the recovery process. The optimum slag cleaning conditions were found to be: a coke dosage of 2 pct, a pyrite dosage of 2 pct, and a smelting temperature of 1260 °C lasting for 2 hours. In order to improve on the low utilization ratio of additives associated with the industrial sedimentation process, an innovative additive introducing method was put forward which enables the additives to mix and react with slag more adequately. A powder injection device was purpose-made to inject additives into molten slag in dispersion state, and a laboratory experiment was carried out to simulate this process. By injecting 2 pct coke and 2 pct pyrite, the contents of Cu and Co in cleaned slag decreased to 0.46 and 0.01 pct, respectively. It proves that the injection of additives into molten slag is an effective method to recover Cu and Co from the matte–slag mixture of ISA furnace.

36 MATERIALS SCIENCE↗

Lateral bearing capacity of hybrid monopile-friction wheel foundation for offshore wind turbines by centrifuge modelling

The hybrid monopile-friction wheel foundation is an innovative alternative for offshore wind turbines. The concept has wider adaptability and can be used as reinforcement method for existing monopiles. A series of centrifuge tests was performed to investigate the lateral bearing capacities of the hybrid foundation under monotonic loads. Five foundation models and two soil types were considered. According to the recorded responses, the hybrid foundation demonstrated better lateral behaviors that both lateral bearing capacity and stiffness are enhanced. Two analytical methods were proposed and compared with the centrifuge test results. The bearing capacity of the hybrid foundation is smaller than the sum of individual pile and friction wheel, and a reduction factor is suggested for both friction wheels. The friction wheel restrains rotations of monopile and provides extra restoring moments; their effects are idealized as equivalent moments acting on the pile head. The analytical results provide possible solutions in estimating the lateral bearing capacity of the innovative hybrid foundation system for offshore wind turbines by using traditional theories.

17 WIND ENERGY↗

Seismic response of offshore wind turbine with hybrid monopile foundation based on centrifuge modelling

Some large capacity offshore wind turbines are constructed in seismically active areas. The occurrence of soil liquefaction during an earthquake can result in severe failures of the offshore wind turbine. The seismic response of the structure and the failure mechanism of the soil-structure interactions are necessary to investigate. In this study, the seismic response of an innovative hybrid monopile foundation is investigated through a series of centrifuge tests. The seismic performance of the combined system of the superstructure, foundation, and soil are demonstrated. Five hybrid foundation models are tested by considering the influence of the foundation thicknesses and diameters, and a monopile foundation is tested for comparison. Centrifuge test results reveal that the hybrid monopile foundation is effective in reducing the lateral displacement during the shaking. In the saturated condition, soil maintains its strength and stiffness beneath and adjacent to the foundation. The hybrid foundation system tends to settle more due to the larger shear stress caused by the soil structure interactions. Influences of the wheel specifications are illustrated. The foundations with larger thicknesses lead to smaller lateral displacements and lower tendencies of liquefaction, but the settlements are intensified. The larger diameter foundation provides a longer drainage path for the excess pore water pressure. With a similar weight, the structure settles less during the earthquake.

17 WIND ENERGY↗

Computational Research of Electronic and Magnetic Properties of Nonmetal Doping of Graphene-Like ZnO Monolayer

In this paper, the geometrical, electronic, and magnetic properties of nonmetal (B, C, N, F, Si, P, or S) atom doping of g-ZnO monolayer supercell have been comprehensively calculated using the first-principle method. The structural optimization implies that nonmetal atom doping of g-ZnO monolayer leads to the structural distortion around the doping atoms compared with pure g-ZnO sheet. We find that g-ZnO monolayer with one O atom per supercell substituted by one B or C atom is ferromagnetic half metal, and that substituted by one N, Si, or P atom exhibits a ferromagnetic semiconductor feature, while that substituted by one F or S atom appears to be nonmagnetic semiconductor. The total magnetic moments mainly originates from the spin polarization of the doping atom (B, C, N, Si, and P), and the rest comes from the nearest Zn and O atoms.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A review on recent advancements of substructures for offshore wind turbines

The sustainable development of offshore wind energy requires thorough investigations on technological issues. The substructure, which acts as the natural link between technologies and environments, is a critical topic for the offshore wind industry. This paper presents a comprehensive review of variable types of offshore wind substructures associate with their corresponding example projects. The study is complemented with a special attention to a novel foundation, namely suction bucket foundation. Main technological issues related to this concept are integrated. In the paper, bearing behaviors of offshore wind turbines (OWTs) with the suction bucket foundation under lateral loads, vertical loads, combined loads, and extreme loading conditions are discussed. Two installation methods are introduced. The geometric and improved design is illustrated by considering capabilities in transportation and installation. Research methods, including field tests, laboratory tests, centrifuge tests, theoretical analysis and numerical simulations, are listed; these methods are employed in previous studies to investigate behaviors of the OWT. This review integrates most relevant aspects and recent advancements together, which aims to provide a reference frame for future studies and projects.

17 WIND ENERGY↗

Essential distinction between one-step anodization and two-step anodization of Ti

Highlights: • One-step anodization (OSA) and two-step anodization (TSA) of Ti are compared. • Constant current anodizations were designed to control charge transfer. • Essential distinction between the OSA and the TSA was analyzed for the first time. • The distinction was clarified by oxygen bubble mould and plastic flow model. • The concaves contribute to the growth of highly-ordered ATNTs during TSA. - Abstract: One-step anodization (OSA) and two-step anodization (TSA) have been widely used to fabricate anodic TiO{sub 2} nanotubes (ATNTs). It has been reported that TSA can fabricated more ordered nanotubes, as compared to OSA. However, the essential distinction between OSA and TSA of Ti has never been clarified. Here, constant current anodizations were designed to study the effects of TSA and OSA on the morphology of ATNTs. The significant differences between nanotubular architecture (length, diameter, porosity) of ATNTs fabricated by OSA and TSA were observed and analyzed for the first time. For TSA, the relationship between the nanotube length (y) and anodizing current (x) corresponds to the liner equation y = 0.259x-2.3, and the relationship between nanotube outside diameter (Y) and anodizing current (x) corresponds to the linear equation Y = 3.352x+65.73. However, no similar linear relationships were found for OSA. The essential distinction between OSA and TSA was clarified by oxygen bubble mould combined with plastic flow model.

36 MATERIALS SCIENCE↗

Feasibility study of offshore wind turbines with hybrid monopile foundation based on centrifuge modeling

The support structure of an offshore wind turbine (OWT) accounts for up to 25% of the capital cost; therefore, investigations into reliable and efficient foundations are critical for the offshore wind turbine industry. This paper describes an innovative hybrid monopile foundation for OWTs, which is an optimization of the original monopile foundation with broader applications. The behavior of OWTs with the hybrid monopile foundation in service conditions are investigated under lateral cyclic loadings, by considering the effects of wind, waves, and ice. A series of centrifuge tests are conducted in order to analyze these behaviors in detail, and OWT models with the original single-pile as well as wheel-only foundations are tested for comparison. Based on these tests, the accumulated lateral displacement and stiffness during cyclic loadings are presented, and the results indicate that the hybrid foundation exhibits a larger cyclic capacity than the other foundations. The influence of the cycle numbers, cyclic loading characteristics, and soil properties is examined during the tests; furthermore, the effects of these factors on the model deformation responses are illustrated. This study proposes the first analytical method for quantitatively estimating the cyclic lateral displacement of the new hybrid foundation in service conditions, and a degradation coefficient is recommended based on the test results. This method aims to provide a simple approach to predicting responses of OWTs with hybrid monopile foundations in service conditions.

17 WIND ENERGY↗

High performance carbon/silica co-decorated TiO{sub 2} nanotubes for visible-light driven water splitting

Graphical abstract: Using amino-propyl-triethoxy silane (KH570) as silane couplers, a novel carbon/silica dots co-decorated TiO{sub 2} nanotube (CS@TNT) is prepared through silane modification and thermal calcination approach. The CS@TNT retains its tubular morphology at as high as 500 °C, and presents a high activity (0.096 mmol/h) towards photocatalytic water splitting. - Highlights: • A novel route of silane-modification then H{sub 2} calcination is developed. • Carbon and silica dots are highly dispersed on the TNT. • The CS@TNT retains its tubular morphology at as high as 500 °C. • A high activity (0.096 mmol/h) is achieved towards photocatalytic water splitting. • Effect of carbon/silica modification is investigated in detail. - Abstract: A novel carbon/silica co-decorated TiO{sub 2} nanotubes (TNT) photocatalyst (CS@TNT) was prepared for visible light driven water splitting by a facile two-steps process of amino-propyl-triethoxy silane modification and calcination. Structure characterizations (XRD, STEM, XPS, UV–vis spectra and PL spectra) revealed that the silica and carbon dots were homogeneously dispersed on the surfaces of TNT. The introduced silica resists crystallization of TNT, and keeps the tubular morphology intact and high surface area; the co-existence of carbon dots increases the visible light absorbance capacity and promotes the electron-hole separation efficiency. The CS@TNT preserves intact tubular morphology during calcination (500 °C), and a high activity of 0.096 mmol/h is achieved, which was 1.7 times higher than that of actual catalyst made of gold nanoparticles loading on TNT.

36 MATERIALS SCIENCE↗

Seismic centrifuge modelling of suction bucket foundation for offshore wind turbine

Wind Energy is the one of the most promising renewable energy. Suction bucket foundation is considered to be a viable type of wind turbine foundation. Soil liquefaction caused by earthquakes at offshore seismic active area may lead to a significant degradation of soil strength and stiffness. In this study, nine centrifuge tests were carried out to investigate the seismic response of suction bucket foundation under earthquake loading. Both dry and saturate soil conditions were considered in tests. The geometric design of five suction bucket models considered the bucket diameter, penetration depth, and modified buckets with inside compartments. It was found that soil underlying and near the bucket foundation shown a better ability to resist liquefaction in saturated tests comparing to free field while no significant differences were observed in dry tests. The five bucket models performed quite differently, which demonstrated the aspect ratio effects and inside-bucket compartment effects. The results provide insight into optimized design of suction bucket foundation for wind turbine.

17 WIND ENERGY↗

Lateral capacity assessment of offshore wind suction bucket foundation in clay via centrifuge modelling

The lateral bearing behaviors of suction bucket foundations for offshore wind turbines are investigated by centrifuge modelling in this paper. The centrifuge tests were performed in lightly over-consolidated clay and heavily over-consolidated clay, and three bucket foundation models with aspect ratios of 0.38, 0.5, and 1.3 were tested. The tests were force-controlled, and both static loads and cyclic loads were applied. In static tests, ultimate bearing capacities of suction bucket foundations were extracted from load-displacement curves as the first method, and the results were reinforced by stiffness-displacement curves. The displacement rates were calculated to find critical bearing capacities and ultimate bearing capacities of the foundations as the second method. The cyclic tests include cyclic loads with uniform and increased amplitudes. The accumulated lateral displacements and secant stiffnesses were discussed, and their variations with cycle numbers were studied.

17 WIND ENERGY↗

On-line monitoring for turbine bypass system based on real-time simulation - 108

Faults may occur in nuclear power plants, but it is difficult for operators to recognize the situation and take effective measures quickly. However, on-line monitoring may help operators to detect the abnormalities so that the safety of nuclear power plants will be improved. As Turbine Bypass System runs during transient processes, quantitative simulation model is utilized for on-line monitoring. In addition, analyzing for residual errors of simulated and corresponding measured values are done by principle component analysis. Under normal operation, the methodology allows real-time tracking to set dynamic thresholds. While a failure occurs, faults can be detected. Simulation analysis show the effectiveness and accuracy of this methodology. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Formaldehyde and co-exposure with benzene induce compensation of bone marrow and hematopoietic stem/progenitor cells in BALB/c mice during post-exposure period

Formaldehyde (FA) is a human leukemogen. Since there is a latency period between initial FA exposure and the development of leukemia, the subsequent impact of FA on hematopoietic stem or progenitor cells (HSCs/HPCs) in post-exposure stage is crucial for a deep understanding of FA-induced hematotoxicity. BALB/c mice were exposed to 3 mg/m{sup 3} FA for 2 weeks, mimicking occupational exposure, and were monitored for another 7 days post-exposure. Meanwhile, we included benzene (BZ) as a positive control, separately and together with FA because co-exposure occurs frequently. After 7-day recovery, colonies of progenitors for CFU-GM and BFU-E, and nucleated bone marrow cells in FA-exposed mice were comparable to controls, although they were significantly reduced during exposure. Levels of reactive oxygen species (ROS) and 8-hydroxy-2′-deoxyguanosine (8-OHdG) in CFU-GM and BFU-E from FA-exposed mice were higher than controls, although the increase in 8-OHdG was not significant. Granulocyte-macrophage colony stimulating factor (GM-CSF) level in the FA group was lower than controls, but the expression level for the receptor was not upregulated. It suggests that HSCs/HPCs in FA-exposed mice respond to a small amount of GM-CSF and proliferate rapidly, which may cause a possible risk of expansion of abnormal stem/progenitor cell clones. FA co-exposure with BZ was more potent for promoting CFU-GM formation and inducing ROS in BFU-E and 8-OHdG in CFU-GM during the post-exposure period. The compensation of myeloid progenitors with elevated ROS and 8-OHdG may lead to a risk of transforming normal HSCs/HPCs to leukemic stem/progenitor cells. Thus, co-exposure may pose a greater leukemia risk. - Highlights: • Nucleated bone marrow cell count recovered after 7 days post-FA and/or BZ exposure. • CFU-GM showed an increase in colonies and 8-OHdG after 7 days post-FA + BZ exposure. • Levels of ROS in CFU-GM and BFU-E were increased by FA or FA + BZ during recovery. • Levels of GM-CSF and EPOR were suppressed after 7 days post-FA or FA + BZ exposure. • Co-exposure was more potent for some endpoints and may pose a greater leukemia risk.

60 APPLIED LIFE SCIENCES↗

Centrifuge modeling of lateral bearing behavior of offshore wind turbine with suction bucket foundation in sand

Suction bucket foundation is a promising alternative for offshore wind turbine foundations. The lateral bearing behavior and failure mechanism are significant topics for optimizing its design criteria. In this study, a group of centrifuge tests were performed to investigate the lateral bearing capacity of suction bucket foundation with three aspect ratios. Force-controlled lateral static and cyclic tests were performed at a centrifuge acceleration of 50g. Four soil conditions were considered in centrifuge tests with a combination of loose/dense and dry/saturated sand. The load-displacement and the stiffness-displacement relationships are presented in the paper, and it is concluded that the lateral bearing capacity can be reached when the normalized lateral displacement (displacement divided by the bucket diameter) reached 3% as the first method. Displacement rates are plotted against the lateral load to give the second method for defining the ultimate lateral capacity. In cyclic tests, the lateral displacement and stiffness are correlated to the cycle numbers in the first 5 cycles, but the change is less apparent in the rest. The results demonstrated the behavior of bucket foundation in service conditions. Finally, a simplified calculation method is used as the third method and checked with tests results.

17 WIND ENERGY↗

I/O-aware bandwidth allocation for petascale computing systems

In the Big Data era, the gap between the storage performance and an appli- cation's I/O requirement is increasing. I/O congestion caused by concurrent storage accesses from multiple applications is inevitable and severely harms the performance. Conventional approaches either focus on optimizing an ap- plication's access pattern individually or handle I/O requests on a low-level storage layer without any knowledge from the upper-level applications. In this paper, we present a novel I/O-aware bandwidth allocation framework to coordinate ongoing I/O requests on petascale computing systems. The motivation behind this innovation is that the resource management system has a holistic view of both the system state and jobs' activities and can dy- namically control the jobs' status or allocate resource on the y during their execution. We treat a job's I/O requests as periodical subjobs within its lifecycle and transform the I/O congestion issue into a classical scheduling problem. Based on this model, we propose a bandwidth management mech- anism as an extension to the existing scheduling system. We design several bandwidth allocation policies with different optimization objectives either on user-oriented metrics or system performance. We conduct extensive trace- based simulations using real job traces and I/O traces from a production IBM Blue Gene/Q system at Argonne National Laboratory. Experimental results demonstrate that our new design can improve job performance by more than 30%, as well as increasing system performance.

I/O congestion↗

An Improved Distributed Secondary Control Method for DC Microgrids With Enhanced Dynamic Current Sharing Performance

This paper proposes an improved distributed secondary control scheme for dc microgrids (MGs), aiming at overcoming the drawbacks of conventional droop control method. The proposed secondary control scheme can remove the dc voltage deviation and improve the current sharing accuracy by using voltage-shifting and slope-adjusting approaches simultaneously. Meanwhile, the average value of droop coefficients is calculated, and then it is controlled by an additional controller included in the distributed secondary control layer to ensure that each droop coefficient converges at a reasonable value. Hence, by adjusting the droop coefficient, each participating converter has equal output impedance, and the accurate proportional load current sharing can be achieved with different line resistances. Furthermore, the current sharing performance in steady and transient states can be enhanced by using the proposed method. The effectiveness of the proposed method is verified by detailed experimental tests based on a 3 × 1 kW prototype with three interface converters.

30 DIRECT ENERGY CONVERSION↗