Engineering Papers⌕ Search

Engineering topics

Yang, Wen

Publications and source records attributed to Yang, Wen.

29 records · Page 2

Deformability of Oxide Inclusions in Tire Cord Steels

The deformation of oxide inclusions in tire cord steels during hot rolling was analyzed, and the factors influencing their deformability at high and low temperatures were evaluated and discussed. The aspect ratio of oxide inclusions decreased with the increasing reduction ratio of the steel during hot rolling owing to the fracture of the inclusions. The aspect ratio obtained after the first hot-rolling process was used to characterize the high-temperature deformability of the inclusions. The deformation first increased and then decreased with the increasing (MgO + Al{sub 2}O{sub 3})/(SiO{sub 2} + MnO) ratio of the inclusions. It also increased with the decreasing melting temperatures of the inclusions. Young’s modulus was used to evaluate the low-temperature deformability of the inclusions. An empirical formula was fitted to calculate the Young’s moduli of the oxides using the mean atomic volume. The moduli values of the inclusions causing wire fracture were significantly greater than the average. To reduce fracture in tire cord steel wires during cold drawing, it is proposed that inclusions be controlled to those with high SiO{sub 2} content and extremely low Al{sub 2}O{sub 3} content. This proposal is based on the hypothesis that the deformabilities of oxides during cold drawing are inversely proportional to their Young’s moduli. The future study thus proposed includes an experimental confirmation for the abovementioned predictions.

36 MATERIALS SCIENCE↗

Effect of Sulfur in Steel on Transient Evolution of Inclusions During Calcium Treatment

In the current study, the effect of S content in the molten steel on inclusions during calcium treatment was studied using an induction furnace. The calcium in steel decreased from 48 to 2 ppm, and the sulfur in steel changed a little with time. When sulfur content in steel was as low as 25 ppm during calcium treatment, inclusions shifted from CaO-Al{sub 2}O{sub 3}-CaS to Al{sub 2}O{sub 3}-CaO with about 35 pct CaO. When the sulfur increased over 90 ppm, more CaS-CaO formed just after the addition of calcium, and then the CaS content decreased from over 45 pct to lower than 15 pct and inclusions were mostly Al{sub 2}O{sub 3}-CaO-CaS and Al{sub 2}O{sub 3}-CaO with a high Al{sub 2}O{sub 3} content. Thermodynamic calculation predicted the variation of the composition of inclusions, indicating good agreement with the measurement, while a certain deviation existed, especially for heats with 90 and 180 ppm sulfur. A reaction model was proposed for the formation of CaO and CaS, which considered the reaction between calcium vapor bubbles in the zone and the dissolved oxygen and sulfur in the molten steel, as described by a Langmuir-type adsorption isotherm with a reaction occurring on the remaining vacant sites. The variation of transient CaS inclusions was discussed based on the thermodynamic calculation and the morphology evolution of typical inclusions containing CaS.

36 MATERIALS SCIENCE↗

Effect of Hyper-Resistivity on Nonlinear Tearing Modes

We analytically explore nonlinear tearing modes with the anomalous electron viscosity or, as it is normally called, hyper-resistivity. In contrast to the flux average method used by previous work, we employ the standard singular perturbation technique and a quasilinear method to obtain the time evolution equation of tearing modes. The finding that the magnetic flux grows with time in a scaling as t 2/3 demonstrates that nonlinear tearing modes with the hyper-resistivity effect alone have a weaker dependence on time than that of the corresponding resistive case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

ZEB1 stimulates breast cancer growth by up-regulating hTERT expression

Highlights: • hTERT expression is positively correlated with ZEB1 expression in breast cancer. • ZEB1 promotes hTERT expression and telomerase activity in breast cancer cell lines. • ZEB1 increases the transcriptional activity of the hTERT promoter but does not bind to the E-box. • ZEB1 controls hTERT expression by interacting with the co-activator Yes-associated protein (YAP). Dysfunctional cell proliferation and death are the foundation of the malignant biological characteristics of cancers. In this study, we discovered that ZEB1 was positively correlated with hTERT in breast invasive ductal carcinoma samples at both the mRNA and protein levels. Further, our in vitro study in breast cancer cell lines confirmed that ZEB1 regulates hTERT expression at the mRNA and protein levels; thus, hTERT promotes or inhibits telomerase activity, and telomere length is either protected or reduced. Finally, we verified that ZEB1, which mostly functions as a transcriptional repressor, can recruit the co-activator YAP to enhance the transcriptional activation of hTERT. Fascinatingly, instead of acting on E-boxes, the ZEB1/YAP complex tends to function as a transcriptional activator by binding with sequences potentially located in the hTERT promoter. Consequently, our research revealed a new ZEB1-hTERT signaling pathway involved in cell proliferation regulation that has never before been illuminated in breast cancer.

60 APPLIED LIFE SCIENCES↗

NECP-Cypress: Development and Benchmarking of a 3D PWR Core-Analysis Code

As one of the key components of nuclear reactor design and safety analysis software for Pressurized Water Reactor (PWR), the advance of the core-analysis code indicates the nuclear power development of the corresponding country. Hence, Nuclear Engineering Computational Physics Lab. (NECP) developed a PWR core-analysis code NECP-Cypress. Currently, it contains several modules including a generalized cross section module, a diffusion module using the Variational Nodal Method (VNM), a depletion-calculation using the traditional macroscopic module, a thermal-hydraulics module solving the single channel heat transfer equation and 1D heat conduction equation. With the VNM employed, NECP-Cypress can eliminate the control rod cusping effect and provide a better pin power reconstruction. In this paper, we firstly introduce the modules of the code NECP-Cypress. Secondly, two large-scale PWR core benchmarks were employed to demonstrate the ability of the code by comparing with SIMULATE-3, including the BEAVRS problem and a pseudo CAP1400 reactor core problem. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Structural, electronic properties and enhancement of electrical polarization in Er{sub 2}NiMnO{sub 6}/La{sub 2}NiMnO{sub 6} superlattice by first-principles calculations

Employing first-principles calculations, structural, electronic properties of new multiferroic material Er{sub 2}NiMnO{sub 6}/La{sub 2}NiMnO{sub 6} perovskite superlattice are investigated. This structure is computed as monoclinic phase with obvious distortion. The average in-plane anti-phase rotation angle, average out-of-plane in-phase rotation angle and other microscopic features are reported in this paper. Ni and Mn are found in this superlattice that stay high spin states. These microscopic properties play important roles in multiferroic properties. Based on these microscopic features, the relationship between the direction of spontaneous polarization and the order of substitution in neighboring A-O layers is explained. Finally, we try to enhance the electrical polarization magnitude by 32% by altering the previous superlattice as LaEr{sub 2}NiMnO{sub 7} structure. Our results show that both repulsion force of A site rare earth ions and the arrangement of B site ions can exert influences on spontaneous polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the tear resistance of skin

Tear resistance is vitally important for the various functions of skin, especially protection from predatorial attack. Here, we mechanistically quantify the extreme tear resistance of skin and identify the underlying structural features, which lead to its sophisticated failure mechanisms. Here we explain why it is virtually impossible to propagate a tear in rabbit skin, chosen as a model material for the dermis of vertebrates. Finally, we express the deformation in terms of four mechanisms of collagen fibril activity in skin under tensile loading that virtually eliminate the possibility of tearing in pre-notched samples: fibril straightening, fibril reorientation towards the tensile direction, elastic stretching and interfibrillar sliding, all of which contribute to the redistribution of the stresses at the notch tip.

59 BASIC BIOLOGICAL SCIENCES↗

Schottky barrier height reduction for metal/n-InP by inserting ultra-thin atomic layer deposited high-k dielectrics

Fermi level pinning at metal/n-InP interface and effective Schottky barrier height (Φ{sub B,eff}) were optimized by inserting ultrathin dielectrics in this work. Comparing the inserted monolayer and bilayer high-k dielectrics, we demonstrated that the introduction of bilayer dielectrics can further reduce Φ{sub B,eff} (from 0.49 eV to 0.22 eV) than the monolayer dielectric (from 0.49 eV to 0.32 eV) even though the overall dielectric thickness was thicker. The additional dipole formed at high-k/high-k interfaces could be used to expound the mechanism. This work proposed an effective solution to reduce resistance contacts for InP based transistors and Schottky barrier transistors.

36 MATERIALS SCIENCE↗

Atomic scale investigations of the gate controlled tunneling effect in graphyne nanoribbon

Configuration and transport properties of zigzag graphyne nanoribbon (n = 2) are investigated by means of the first-principles calculations and non-equilibrium Green's function in this work. We demonstrated the controllability of the graphyne's conductivity by gate bias, and the tunneling behavior induced by gate and drain voltages was investigated systemically. The characteristics of I{sub d}-V{sub d}, I{sub d}-V{sub g}, as well as the evolutions of current with electron temperature elevation were explored. The device exhibits a tunneling ratio around 10{sup 3}, and the state art of tunneling operations of the tunneling field effect transistor in this split-new material was achieved.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Intrinsic Spin Hall Effect Induced by Quantum Phase Transition in HgCdTe Quantum Wells

Spin Hall effect can be induced both by the extrinsic impurity scattering and by the intrinsic spin-orbit coupling in the electronic structure. The HgTe/CdTe quantum well has a quantum phase transition where the electronic structure changes from normal to inverted. We show that the intrinsic spin Hall effect of the conduction band vanishes on the normal side, while it is finite on the inverted side. This difference gives a direct mechanism to experimentally distinguish the intrinsic spin Hall effect from the extrinsic one.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗