Engineering Papers⌕ Search

Engineering topics

Yang, Lin

Publications and source records attributed to Yang, Lin.

At least 73 records · Page 4

Metal-organic framework-derived Nickel Cobalt oxysulfide nanocages as trifunctional electrocatalysts for high efficiency power to hydrogen

Here we report a synthesis of nickel cobalt oxysulfide nanocage trifunctional electrocatalysts by sulfurizing zeolitic imidazolate framework-67. Benefiting from the synergistic coupling of nickel cobalt oxysulfide and N-doped carbon polyhedron in a hollow dodecahedral structure, the nickel cobalt oxysulfide nanocages exhibit superior trifunctional electrocatalytic activity and durability towards oxygen reduction and evolution, and hydrogen evolution reactions in alkaline conditions. Moreover, the nickel cobalt oxysulfide nanocage trifunctional electrocatalysts are used in an air cathode for a rechargeable zinc-air battery and in both anode and cathode for overall water splitting, where the water splitting is directly powered by the assembled zinc-air battery. Such integrative power-to-hydrogen device can operate stably over 17 h without visible energy efficiency losses for hydrogen gas production.

08 HYDROGEN↗

Observation of η-Al41Sm5 reveals motif-aware structural evolution in Al-Sm alloys

Using an effective genetic algorithm, we uncover the structure of a metastable Al41Sm5 phase that supplements its family sharing similar short-range orders. The phase evolves upon heating an amorphous Al-9.7at.%Sm ribbon, produced by melt-spinning. The dynamical phase selection is discussed with respect to the structural connections between the short-range packing motifs in the amorphous precursor and those observed in the selected phases. This dataset includes information such as the crystal structure of Al41Sm5, the short-range packing motifs, experimental and calculated XRD, formation energy of stable and meta-stable phases in the Al-Sm system.

Ye, Zhou↗

An Oxygen Vacancy-rich Semiconductor Supported Bifunctional Catalyst for Efficient and Stable Zinc-Air Battery

The highly oxidative operating condition of rechargeable zinc-air batteries causes significant carbon-support corrosion of bifunctional oxygen electrocatalysts. In this work, we propose a new strategy for the catalyst support design focusing on OV-rich, low-bandgap semiconductor. The OVs promote the electrical conductivity of the oxide support, and at the same time offer a strong metal-support interaction (SMSI), which enables the catalysts small metal size, high catalytic activity, and high stability. The strategy is demonstrated by successfully synthesizing ultrafine Co metal decorated three-dimensionally ordered macroporous titanium oxynitride (3DOM-Co@TiO x N y ). The 3DOM-Co@TiO x N y catalyst exhibits comparable activities for oxygen reduction and evolution reactions, but much higher cycling stability than noble-metals in alkaline conditions. The zinc-air battery using this catalyst delivers an excellent stability with less than 1% energy efficiency loss over 900 charge-discharge cycles at 20 mA cm -2 . The high stability is attributed to the strong SMSI between Co and 3DOM-TiO x N y which verified by density functional theory (DFT) calculations. These results shed light on using OV-rich semiconductors as a promising support to design efficient and durable non-precious electrocatalysts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Hierarchical design and development of nanostructured trifunctional catalysts for electrochemical oxygen and hydrogen reactions

Trifunctional catalysts show a great potential for use in a power-to-gas water-splitting devices for hydrogen gas production, powered by an integrated rechargeable zinc-air battery. None of the currently available commercial electrocatalysts is low cost, and they do not possess excellent catalytic activity and durability at the same time, which is the main barrier to the broad implementation of these technologies. Herein, we design and develop a novel nanostructured trifunctional electrocatalyst that is capable of catalyzing oxygen/hydrogen evolution and oxygen reduction reactions. The combination of non-precious Co, Co 9 S 8 , and S, N co-doped graphitic carbon synergistically provides highly active sites for efficient catalytic reactions, while the unique tubular morphology and hierarchically porous microstructure not only benefit fast access to active sites but also ensure a robust composite structure for durability. As a result, when applied to zinc-air batteries and water splitting, these systems exhibit performance superior to those of commercial precious electrocatalysts (e.g., Pt/C and Ir/C).

08 HYDROGEN↗

Optimization of Process Parameters for the Axial Distortion and Distortion Range During Die Quenching of a Spiral Bevel Gear

The strength of high-duty gears can be improved by carburizing and quenching processes. Quenching distortion is inevitable during the process, and it has direct effects on the precision of the gear. For spiral bevel gear with big diameter and small thickness, die quenching process is applied in the manufacturing to control the distortion in axial direction. Die quenching parameters must be optimized to minimize the distortion while considering non-uniformity of chemical compositions and loads. In this paper, material models of gear material (22CrMoH) built based on the phase transformation kinetics, static mechanical properties and phase transformation plasticity equations. Finite element analysis (FEA) models are conducted to study the whole die quenching process based on the production process. Die quenching experiments and testing of microstructures and distortions are conducted to verify the accuracy of the FEA models. The effects of loads and bottom die obliquity on the final distortion are studied to set the appropriate range and control distortion. The distortion was very sensitive to the bottom die obliquity and some part of load ranges. The distortion changes little when the load of inner die was in the range of 1.38-2.07 MPa and the load of outer die was in the range of 2.07-2.76 MPa. The distortion range is fitted the production requirements by setting the inclination angle of bottom die between 0.12° and 0.29°.

36 MATERIALS SCIENCE↗

Effect of samarium doping on the nucleation of fcc-aluminum in undercooled liquids

In this paper, the effect of Sm doping on the fcc-Al nucleation was investigated in Al-Sm liquids with low Sm concentrations (x Sm ) with molecular dynamics simulations. The nucleation in the moderately undercooled liquid is achieved by the recently developed persistent-embryo method. Systematically computing the nucleation rate with different x Sm (x Sm = 0%, 1%, 2%, 3%, 5%) at 700 K, we found Sm dopant reduces the nucleation rate by up to 25 orders of magnitudes with only 5% doping concentration. Finally, this effect is mostly associated with the increase in the free energy barrier with minor contribution from suppression of the attachment to the nucleus caused by Sm doping.

36 MATERIALS SCIENCE↗

Spatially-correlated Site Occupancy in the Nonstoichiometric Meta-stable ε -Al 60 Sm 11 Phase during Devitrification of Al-10.2 at.% Sm Glasses

A metastable ε-Al 60 Sm 11 phase appears during the initial devitrification of as-quenched Al-10.2 at.% Sm glasses. The ε phase is nonstoichiometric in nature since Al occupation is observed on the 16 f Sm lattice sites. Scanning transmission electron microscopic images reveal profound spatial correlation of Sm content on these sites, which cannot be explained by the “average crystal” description from Rietveld analysis of diffraction data. Thermodynamically favorable configurations, established by Monte Carlo (MC) simulations based on a cluster-expansion model, also give qualitatively different correlation functions from experimental observations. On the other hand, molecular dynamics simulations of the growth of ε-Al 60 Sm 11 in undercooled liquid show that when the diffusion range of Sm is limited to ~4 Å, the correlation function of the as-grown crystal structure agrees well with that of the scanning transmission electronic microscopy (STEM) images. Furthermore, our results show that kinetic effects, especially the limited diffusivity of Sm atoms plays the fundamental role in determining the nonstoichiometric site occupancies of the ε-Al 60 Sm 11 phase during the crystallization process.

36 MATERIALS SCIENCE↗

A comparative study of Sm networks in Al-10 at.%Sm glass and associated crystalline phases

Here, the Al–Sm system is selected as a model system to study the transition process from liquid and amorphous to crystalline states. In recent work, we have shown that, in addition to long-range translational periodicity, crystal structures display well-defined short-range local atomic packing motifs that transcends liquid, amorphous and crystalline states. In this paper, we investigate the longer range spatial packing of these short-range motifs by studying the interconnections of Sm–Sm networks in different amorphous and crystalline samples obtained from molecular dynamics simulations. In our analysis, we concentrate on Sm–Sm distances in the range ~5.0–7.2 Å, corresponding to Sm atoms in the second and third shells of Sm-centred clusters. We discover a number of empirical rules characterising the evolution of Sm networks from the liquid and amorphous states to associated metastable crystalline phases experimentally observed in the initial stages of devitrification of different amorphous samples. As direct simulation of glass formation is difficult because of the vast difference between experimental quench rates and what is achievable on the computer, we hope these rules will be helpful in building a better picture of structural evolution during glass formation as well as a more detailed description of phase selection and growth during devitrification.

36 MATERIALS SCIENCE↗

Overcoming the Time Limitation in Molecular Dynamics Simulation of Crystal Nucleation: A Persistent-Embryo Approach

The crystal nucleation from liquid in most cases is too rare to be accessed within the limited time scales of the conventional molecular dynamics (MD) simulation. Here, we developed a “persistent embryo” method to facilitate crystal nucleation in MD simulations by preventing small crystal embryos from melting using external spring forces. We applied this method to the pure Ni case for a moderate undercooling where no nucleation can be observed in the conventional MD simulation, and obtained nucleation rate in good agreement with the experimental data. Moreover, the method is applied to simulate an even more sluggish event: the nucleation of the B2 phase in a strong glass-forming Cu-Zr alloy. The nucleation rate was found to be 8 orders of magnitude smaller than Ni at the same undercooling, which well explains the good glass formability of the alloy. In conclusion, our work opens a new avenue to study solidification under realistic experimental conditions via atomistic computer simulation.

36 MATERIALS SCIENCE↗

Interpenetrating Triphase Cobalt-Based Nanocomposites as Efficient Bifunctional Oxygen Electrocatalysts for Long-Lasting Rechargeable Zn–Air Batteries

Rational construction of atomic-scale interfaces in multiphase nanocomposites is an intriguing and challenging approach to developing advanced catalysts for both oxygen reduction (ORR) and evolution reactions (OER). In this paper, a hybrid of interpenetrating metallic Co and spinel Co 3 O 4 “Janus” nanoparticles stitched in porous graphitized shells (Co/Co 3 O 4 @PGS) is synthesized via ionic exchange and redox between Co 2+ and 2D metal–organic-framework nanosheets. This strategy is proven to effectively establish highways for the transfer of electrons and reactants within the hybrid through interfacial engineering. Specifically, the phase interpenetration of mixed Co species and encapsulating porous graphitized shells provides an optimal charge/mass transport environment. Furthermore, the defect-rich interfaces act as atomic-traps to achieve exceptional adsorption capability for oxygen reactants. Finally, robust coupling between Co and N through intimate covalent bonds prohibits the detachment of nanoparticles. As a result, Co/Co 3 O 4 @PGS outperforms state-of-the-art noble-metal catalysts with a positive half-wave potential of 0.89 V for ORR and a low potential of 1.58 V at 10 mA cm -2 for OER. Finally, in a practical demonstration, ultrastable cyclability with a record lifetime of over 800 h at 10 mA cm -2 is achieved by Zn–air batteries with Co/Co 3 O 4 @PGS within the rechargeable air electrode.

25 ENERGY STORAGE↗

CtBP represses Dpp signaling as a dimer

Highlights: • Ectopic expression of CtBP causes a disrupted wing vein pattern. • CtBP causes a decreased pMad level. • CtBP requires dimerization to repress Dpp signaling pathway. C-terminal binding protein (CtBP) is a highly conserved transcriptional co-repressor in animal development and human diseases. In Drosophila, CtBP is critical for fly development and is thought to exert its repressive roles in many signaling pathways including Dpp/BMP pathway. Here we provide evidence that although wild type CtBP negatively and dominantly influences Dpp signaling in fly presumptive wings, mutant CtBP unable to form dimer does not, indicating that dimerization is required for the repression role of CtBP in Dpp signaling in vivo.

60 APPLIED LIFE SCIENCES↗

Implementation of metal-friendly EAM/FS-type semi-empirical potentials in HOOMD-blue: A GPU-accelerated molecular dynamics software

We present an implementation of EAM and FS interatomic potentials, which are widely used in simulating metallic systems, in HOOMD-blue, a software designed to perform classical molecular dynamics simulations using GPU accelerations. We first discuss the details of our implementation and then report extensive benchmark tests. We demonstrate that single-precision floating point operations efficiently implemented on GPUs can produce sufficient accuracy when compared against double-precision codes, as demonstrated in test simulations of calculations of the glass-transition temperature of Cu 64.5 Zr 35.5 , and pair correlation function of liquid Ni 3 Al. Our code scales well with the size of the simulating system on NVIDIA Tesla M40 and P100 GPUs. Compared with another popular software LAMMPS running on 32 cores of AMD Opteron 6220 processors, the GPU/CPU performance ratio can reach as high as 4.6. In conclusion, the source code can be accessed through the HOOMD-blue web page for free by any interested user.

36 MATERIALS SCIENCE↗

Modular Self-Assembly of Protein Cage Lattices for Multistep Catalysis

The assembly of individual molecules into hierarchical structures is a promising strategy for developing three-dimensional materials with properties arising from interaction between the individual building blocks. Virus capsids are elegant examples of biomolecular nanostructures, which are themselves hierarchically assembled from a limited number of protein subunits. Here, we demonstrate the bio-inspired modular construction of materials with two levels of hierarchy: the formation of catalytically active individual virus-like particles (VLPs) through directed self-assembly of capsid subunits with enzyme encapsulation, and the assembly of these VLP building blocks into three-dimensional arrays. The structure of the assembled arrays was successfully altered from an amorphous aggregate to an ordered structure, with a face-centered cubic lattice, by modifying the exterior surface of the VLP without changing its overall morphology, to modulate interparticle interactions. The assembly behavior and resultant lattice structure was a consequence of interparticle interaction between exterior surfaces of individual particles and thus independent of the enzyme cargos encapsulated within the VLPs. These superlattice materials, composed of two populations of enzyme-packaged VLP modules, retained the coupled catalytic activity in a two-step reaction for isobutanol synthesis. As a result, this study demonstrates a significant step toward the bottom-up fabrication of functional superlattice materials using a self-assembly process across multiple length scales and exhibits properties and function that arise from the interaction between individual building blocks.

36 MATERIALS SCIENCE↗