Engineering Papers⌕ Search

Engineering topics

Yang, Li

Publications and source records attributed to Yang, Li.

At least 109 records · Page 6

Synthesis of the Stereoisomeric Clusters 1,2-Os 3 (CO) 10 (trans-dpmn) and 1,2-Os 3 (CO) 10 (cis-dpmn) [where dpmn = 2,3-bis(diphenylphosphinomethyl)-5-norbornene]: DFT Evaluation of the Isomeric Clusters 1,2-Os 3 (CO) 10 (dpmn) and Isomer-Dependent Diphosphine Ligand Activation

The bicyclic diphosphines trans- and cis-2,3-bis(diphenylphosphinomethyl)-5-norbornene (dpmn) react with 1,2-Os 3 (CO) 10 (MeCN) 2 (1) to furnish the corresponding ligand-bridged clusters Os 3 (CO) 10 (trans-dpmn) (2) and Os 3 (CO) 10 (cis-dpmn) (3). Both new products have been isolated and the molecular structures established by X-ray diffraction analyses. The dihydroxyl-bridged cluster 1,2-Os 3 (CO) 8 (μ-OH) 2 (cis-dpmn) (4), which accompanied the formation of 3 in one reaction, has been isolated and characterized by mass spectrometry and X-ray crystallography. Whereas cluster 2 is stable in toluene at 373 K, 3 is thermally sensitive under identical conditions and undergoes loss of CO (2 equiv), coupled with the activation of three norbornene C-H bonds and one P-C(phenyl) bond, to furnish the dihydride cluster H 2 Os 3 (CO) 8 [μ 3 -2-PhPC -3 -endo-Ph 2 PCH 2 (C 7 H 7 )] (5). The solid-state structure of 5 confirms the multiple activation of the cis-dpmn ligand and accompanying formation of the face-capping 2-PhPC-3-endo-Ph 2 PCH 2 (C 7 H 7 ) moiety in the product. DFT calculations on 2 and 3 indicate that the former cluster is the thermodynamically more stable isomer, and the conversion of 3→ 5 + 2CO + benzene is computed to be exergonic by 12.7 kcal/mol and is entropically favored due to the release of the CO and benzene by-products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synergistic cooperation of MDM2 and E2F1 contributes to TAp73 transcriptional activity

Highlights: • MDM2 is a novel positive regulator of TAp73 transcriptional activity. • MDM2 colocalizes together and physically interacts with E2F1. • Synergistic cooperation of MDM2 and E2F1 is crucial for TAp73 transcription. • MDM2 regulates TAp73 transcriptional activity in a p53-independent manner. - Abstract: TAp73, a structural homologue of p53, plays an important role in tumorigenesis. E2F1 had been reported as a transcriptional regulator of TAp73, however, the detailed mechanism remains to be elucidated. Here we reported that MDM2-silencing reduced the activities of the TAp73 promoters and the endogenous TAp73 expression level significantly; while MDM2 overexpression upregulated them. We further revealed that the regulation of TAp73 transcriptional activity occurs as a synergistic effect of MDM2 and E2F1, most probably through their physical interaction in the nuclei. Furthermore, we also suggested that MDM2 might be involved in DNA damage-induced TAp73 transcriptional activity. Finally, we elucidated that MDM2-silencing reduced the proliferation rate of colon carcinoma cells regardless of the p53 status. Our data show a synergistic effect of MDM2 and E2F1 on TAp73 transcriptional activity, suggesting a novel regulation pathway of TAp73.

60 APPLIED LIFE SCIENCES↗

Temperature effect on optical spectra of monolayer molybdenum disulfide

Recently, measured optical absorption and photoluminescence spectra reveal substantial frequency shifts of both exciton and trion peaks as monolayer molybdenum disulfide, MoS{sub 2}, is cooled from 363 K to 4 K. First-principles simulations using the GW-Bethe-Salpeter equation approach satisfactorily reproduce these frequency shifts by incorporating the thermal expansion effect. Studying these temperature effects in monolayer MoS{sub 2} is crucial for rectifying the results of available experiments with the previous predictions of zero-temperature-limit simulations. Moreover, our estimated thermal expansion coefficient of monolayer MoS{sub 2} is less than that of bulk counterpart by tracking the frequency shifts of the exciton peaks in optical spectra. This may serve as a convenient way to estimate thermal expansion coefficients of general two-dimensional chalcogenides.

36 MATERIALS SCIENCE↗

In situ SEM and ToF-SIMS analysis of IgG conjugated gold nanoparticles at aqueous surfaces

In this study, we report new results of in situ study of 5 nm goat anti-mouse IgG gold nanoparticles in a novel portable vacuum compatible microfluidic device using scanning electron microscope (SEM) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The unique feature of the liquid flow cell is that the detection window is open to the vacuum allowing direct probing of the liquid surface. The flow cell is composed of a silicon nitride (SiN) membrane and polydimethylsiloxane (PDMS), and it is fully compatible with vacuum operations for surface analysis. The aperture can be drilled through the 100 nm SiN membrane using a focused ion beam. Characteristic signals of the conjugated gold nanoparticles were successfully observed through the aperture by both energy-dispersive X-ray spectroscopy (EDX) in SEM and ToF-SIMS. Comparison was also made among wet samples, dry samples, and liquid sample in the flow cell using SEM/EDX. Stronger gold signal can be observed in our novel portable device by SEM/EDX compared with the wet or dry samples, respectively. Our results indicate that analyses of the nanoparticle components are better made in their native liquid environment. This is made possible using our unique microfluidic flow cell.

aqueous surface↗

Dynamics of Helium-Loaded Grain Boundaries under Shear Deformation in α-Fe

The defects produced in collision cascades will interact with microstructural features in materials, such as GBs and dislocations. The coupled motion of GBs under stress has been widely observed in simulations and experiments. Two symmetric tilt GBs with a common <110> tilt axis (Σ3 and Σ11) in bcc iron are used to investigate the coupled motion of GBs under shear deformation. Also, we have explored the effect of self-interstitial atoms (SIAs) loading on the GB motion, with different concentrations of interstitials randomly inserted around the GB plane. The simulation results show that the interstitial loading reduces the critical stress of the GB coupled motion for the Σ3 GB. Furthermore, the interstitials and vacancies are inserted randomly at the GB plane and at a distance of 1 nm away from the GB plane, respectively, to understand the self-healing mechanism of GBs under stress. The behavior of the defect-loaded GBs depends on the GB structure. The loaded interstitials in the Σ3 GB easily form <111> interstitial clusters that do not move along with the GB. The vacancies in the Σ3 GB impede the GB motion. However, the interstitials move along with the Σ11 GB and annihilate with vacancies when the GB moves into the vacancy-rich region, leading to the self-healing and damage recovery of the Σ11 GB.

Gao, Fei↗

A synthetic mechano-growth factor E peptide promotes rat tenocyte migration by lessening cell stiffness and increasing F-actin formation via the FAK-ERK1/2 signaling pathway

Tendon injuries are common in sports and are frequent reasons for orthopedic consultations. The management of damaged tendons is one of the most challenging problems in orthopedics. Mechano-growth factor (MGF), a recently discovered growth repair factor, plays positive roles in tissue repair through the improvement of cell proliferation and migration and the protection of cells against injury-induced apoptosis. However, it remains unclear whether MGF has the potential to accelerate tendon repair. We used a scratch wound assay in this study to demonstrate that MGF-C25E (a synthetic mechano-growth factor E peptide) promotes the migration of rat tenocytes and that this promotion is accompanied by an elevation in the expression of the following signaling molecules: focal adhesion kinase (FAK) and extracellular signal regulated kinase1/2 (ERK1/2). Inhibitors of the FAK and ERK1/2 pathways inhibited the MGF-C25E-induced tenocyte migration, indicating that MGF-C25E promotes tenocyte migration through the FAK-ERK1/2 signaling pathway. The analysis of the mechanical properties showed that the Young's modulus of tenocytes was decreased through treatment of MGF-C25E, and an obvious formation of pseudopodia and F-actin was observed in MGF-C25E-treated tenocytes. The inhibition of the FAK or ERK1/2 signals restored the decrease in Young's modulus and inhibited the formation of pseudopodia and F-actin. Overall, our study demonstrated that MGF-C25E promotes rat tenocyte migration by lessening cell stiffness and increasing pseudopodia formation via the FAK-ERK1/2 signaling pathway. - Highlights: • Mechano-growth factor E peptide (MGF-C25E) promotes migration of rat tenocytes. • MGF-C25E activates the FAK-ERK1/2 pathway in rat tenocytes. • MGF-C25E induces the actin remodeling and the formation of pseudopodia, and decreases the stiffness in rat tenocytes. • MGF-C25E promotes tenocyte migration via altering stiffness and forming pseudopodia by the activation of the FAK-ERK1/2 pathway.

60 APPLIED LIFE SCIENCES↗

In situ molecular imaging of hydrated biofilm in a microfluidic reactor by ToF-SIMS

The first results of using a novel single channel microfluidic reactor to enable Shewanella biofilm growth and in situ characterization using time-of-flight secondary ion mass spectrometry (ToF-SIMS) in the hydrated environment are presented. The new microfluidic interface allows direct probing of the liquid surface using ToF-SIMS, a vacuum surface technique. The detection window is an aperture of 2 m in diameter on a thin silicon nitride (SiN) membrane and it allows direct detection of the liquid surface. Surface tension of the liquid flowing inside the microchannel holds the liquid within the aperture. ToF-SIMS depth profiling was used to drill through the SiN membrane and the biofilm grown on the substrate. In situ 2D imaging of the biofilm in hydrated state was acquired, providing spatial distribution of the chemical compounds in the biofilm system. This data was compared with a medium filled microfluidic reactor devoid of biofilm and dried biofilm samples deposited on clean silicon wafers. Principle Component Analysis (PCA) was used to investigate these observations. Our results show that imaging biofilms in the hydrated environment using ToF-SIMS is possible using the unique microfluidic reactor. Moreover, characteristic biofilm fatty acids fragments were observed in the hydrated biofilm grown in the microfluidic channel, illustrating the advantage of imaging biofilm in its native environment.

Environmental Molecular Sciences Laboratory↗

MiR-125a TNF receptor-associated factor 6 to inhibit osteoclastogenesis

MicroRNAs (miRNAs) play important roles in osteoclastogenesis and bone resorption. In the present study, we found that miR-125a was dramatically down-regulated during macrophage colony stimulating factor (M-CSF) and receptor activator of nuclear factor-κB ligand (RANKL) induced osteoclastogenesis of circulating CD14+ peripheral blood mononuclear cells (PBMCs). Overexpression of miR-125a in CD14+ PBMCs inhibited osteoclastogenesis, while inhibition of miR-125a promoted osteoclastogenesis. TNF receptor-associated factor 6 (TRAF6), a transduction factor for RANKL/RANK/NFATc1 signal, was confirmed to be a target of miR-125a. EMSA and ChIP assays confirmed that NFATc1 bound to the promoter of the miR-125a. Overexpression of NFATc1 inhibited miR-125a transcription, and block of NFATc1 expression attenuated RANKL-regulated miR-125a transcription. Here, we reported that miR-125a played a biological function in osteoclastogenesis through a novel TRAF6/ NFATc1/miR-125a regulatory feedback loop. It suggests that regulation of miR-125a expression may be a potential strategy for ameliorating metabolic disease. - Highlights: • MiR-125a was significantly down-regulated in osteoclastogenesis of CD14+ PBMCs. • MiR-125a inhibited osteoclast differentiation by targeting TRAF6. • NFATc1 inhibited miR-125a transciption by binding to the promoter of miR-125a. • TRAF6/NFATc1 and miR-125a form a regulatory feedback loop in osteoclastogenesis.

60 APPLIED LIFE SCIENCES↗

Binding energetics of substitutional and interstitial helium and di-helium defects with grain boundary structure in α-Fe

The formation/binding energetics and length scales associated with the interaction between He atoms and grain boundaries in BCC α-Fe were explored. Ten different low Σ grain boundaries from the 〈100〉 and 〈110〉 symmetric tilt grain boundary systems were used. In this work, we then calculated formation/binding energies for 1–2 He atoms in the substitutional and interstitial sites (HeV, He{sub 2}V, HeInt, He{sub 2}Int) at all potential grain boundary sites within 15 Å of the boundary (52 826 simulations total). The present results provide detailed information about the interaction energies and length scales of 1–2 He atoms with grain boundaries for the structures examined. A number of interesting new findings emerge from the present study. For instance, the Σ3(112) twin boundary in BCC Fe possesses a much smaller binding energy than other boundaries, which corresponds in long time dynamics simulations to the ability of an interstitial He defect to break away from the boundary in simulations on the order of nanoseconds. Additionally, positive correlations between the calculated formation/binding energies of the He defects (R > 0.9) asserts that the local environment surrounding each site strongly influences the He defect energies and that highly accurate quantum mechanics calculations of lower order defects may be an adequate predictor of higher order defects. Various metrics to quantify or classify the local environment were compared with the He defect binding energies. The present work shows that the binding and formation energies for He defects are important for understanding the physics of He diffusion and trapping by grain boundaries, which can be important for modeling He interactions in polycrystalline steels.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Precipitates of Cr at Σ3 <110> {112} GB in α-Fe

Precipitates of Cr at Σ3 <110> {112} GB in α-Fe have been studied using molecular dynamics with a two-band embedded atomic model potential. The accumulation and segregation of Cr atoms and the evolution of the GB depend on local Cr concentration and temperature. At the early stage, with the existence of vacancies, the strong attraction of Cr with the GB core provides a pathway for Cr atoms to quickly accumulate within the GB core. With the increase of Cr concentration, the size of Cr dilute precipitates increases dramatically. And the strong segregation of Cr at the GB is observed, when Cr concentration reach 20%. Also, the size of Cr precipitates increases with increasing the temperatures from 300 K to 1000 K. The accumulation and segregation of Cr atoms at the GB lead to significant deformation of the GB structure and the formation of GB steps, causing the displacement and broadening of the GB.

Grain boundary↗

In situ chemical probing of the electrode-electrolyte interface by ToF-SIMS

A portable vacuum interface allowing direct probing of the electrode-electrolyte interface was developed. A classical electrochemical system consisting of gold working electrode, platinum counter electrode, platinum reference electrode, and potassium iodide electrolyte was used to demonstrate real-time observation of the gold iodide adlayer on the electrode and chemical species as a result of redox reactions using cyclic voltammetry (CV) and the time-of-flight secondary ion mass spectrometry (ToF-SIMS, a vacuum-based surface analytical technique) simultaneously. This microfluidic electrochemical probe provides a new way to investigate the surface region with adsorbed molecules and region of diffused layer with chemical speciation in liquids in situ by surface sensitive techniques.

chemical imaging↗

Mechanical and Electronic Properties of A1-xBxHy (A and B =Ti, Zr, Hf) Hydride Alloys: A First-principles Study

Using ab initio calculations, we investigated the mechanical and electronic properties of Ti1-xHfxHy, Ti1-xZrxHy and Zr1-xHfxTHy (x=0, 0.25, 0.5, 0.75, 1; y=1.5, 1.75, 2). The calculated results in binary hydrides show that the β-phase MH1.5[100] (M=Ti, Zr, Hf) are more stable than other possible structures. At the Fermi level, the density of states for metal d state increases with increasing the H concentration in MHy (y ranged from 1.5 to 2), which leads to the instability of their fcc structures and induces the tetragonal distortion. Ti0.75Hf0.25H1.5 and Zr0.25Hf0.75H1.5 exhibit the highest mechanical stability, while Ti0.25Zr0.75H1.5 has the lowest mechanical stability among the corresponding ternary systems considered. Moreover, the systems studied in the present work are all anisotropic and show a ductile behavior. The tetragonal distortion in Ti1-xHfxH1.5, Ti1-xZrxH1.5 and Zr1-xHfxH1.5 is not observed, retaining their fcc structures. The electronic structure of A1-xBxHy (A and B =Ti, Hf, Zr) exhibits metallic character.

Ab initio calculation↗

Anomalous structural evolution and liquid fragility signatures in Cu-Zr and Cu-Hf liquids and glasses

The results of high energy X-ray scattering studies of equilibrium and supercooled Cu 100-x Zr x (x = 46 and 54) and Cu x Hf 100-x (x = 55 and 60.8) liquids and the corresponding glasses are presented. The liquid data were obtained in a containerless environment using the beamline electrostatic levitation (BESL) technique. The total structure factor and total pair correlation functions were measured as a function of temperature for the liquids, and for the glasses at room temperature. A developing asymmetry in the peak of the first coordination shell in the total pair correlation function suggests chemical ordering in the liquids with cooling. This asymmetry takes the form of two prominent peaks, suggesting two prominent ordering length scales. When the magnitudes of these peaks are extrapolated to the glass transition temperature a discontinuity is observed, indicating that an abrupt increase in the magnitude is required to match the observed peak heights in the glass. This suggests that the structure of the supercooled liquid orders more rapidly near the glass transition temperature, a conclusion that is supported by molecular dynamics simulations. This observed structural evolution of the liquid indicates that the concept of fragility, typically defined from the behavior of viscosity with temperature, has a measurable structural signature as well, which can be observed in X-ray diffraction studies.

Mauro, N. A.↗

Mechano-growth factor induces migration of rat mesenchymal stem cells by altering its mechanical properties and activating ERK pathway

Highlights: •MGF induced the migration of rat MSC in a concentration-dependent manner. •MGF enhanced the mechanical properties of rMSC in inducing its migration. •MGF activated the ERK 1/2 signaling pathway of rMSC in inducing its migration. •rMSC mechanics may synergy with ERK 1/2 pathway in MGF-induced rMSC migration. -- Abstract: Mechano-growth factor (MGF) generated by cells in response to mechanical stimulation has been identified as a mechano effector molecule, playing a key role in regulating mesenchymal stem cell (MSC) function, including proliferation and migration. However, the mechanism(s) underlying how MGF-induced MSC migration occurs is still unclear. In the present study, MGF motivated migration of rat MSCs (rMSCs) in a concentration-dependent manner and optimal concentration of MGF at 50 ng/mL (defined as MGF treatment in this paper) was demonstrated. Notably, enhancement of mechanical properties that is pertinent to cell migration, such as cell traction force and cell stiffness were found to respond to MGF treatment. Furthermore, MGF increased phosphorylation of extracellular signal-regulated kinase (ERK), ERK inhibitor (i.e., PD98059) suppressed ERK phosphorylation, and abolished MGF-induced rMSC migration were found, demonstrating that ERK is involved molecule for MGF-induced rMSC migration. These in vitro evidences of MGF-induced rMSC migration and its direct link to altering rMSC mechanics and activating the ERK pathway, uncover the underlying biomechanical and biological mechanisms of MGF-induced rMSC migration, which may help find MGF-based application of MSC in clinical therapeutics.

60 APPLIED LIFE SCIENCES↗

Effects of Temperature on the Interactions of Helium-Vacancy Clusters with Gliding Edge Dislocations in α-Fe

The interaction of helium-vacancy (He-V) clusters with a gliding a/2<111>{110} edge dislocation in a-Fe is investigated by molecular dynamics methods under a constant strain rate at temperatures of 100 to 600 K. A number of small HenVm (n/m = 0~4) clusters initially placed at different positions relative to the slip plane are comparatively studied. The results show that the interaction of He-V clusters with gliding edge dislocations depends on the helium-to-vacancy (He/V) ratio, the position of the clusters relative to the slip plane, the cluster size, and also temperature. The obstacle strength of the He-V clusters relevant to the dislocation motion generally increases with increasing He/V ratio at the same temperature, but decreases slightly with increasing temperature for the same He-V cluster. One of the interesting results is that He-V clusters do not move along with the dislocation, even at 600 K.

a-Fe↗

Systems and methods for analyzing liquids under vacuum

Systems and methods for supporting a liquid against a vacuum pressure in a chamber can enable analysis of the liquid surface using vacuum-based chemical analysis instruments. No electrical or fluid connections are required to pass through the chamber walls. The systems can include a reservoir, a pump, and a liquid flow path. The reservoir contains a liquid-phase sample. The pump drives flow of the sample from the reservoir, through the liquid flow path, and back to the reservoir. The flow of the sample is not substantially driven by a differential between pressures inside and outside of the liquid flow path. An aperture in the liquid flow path exposes a stable portion of the liquid-phase sample to the vacuum pressure within the chamber. The radius, or size, of the aperture is less than or equal to a critical value required to support a meniscus of the liquid-phase sample by surface tension.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗