Engineering Papers⌕ Search

Engineering topics

Yang, Li

Publications and source records attributed to Yang, Li.

At least 55 records · Page 3

Oxygen point defect accumulation in single-phase U O 2 + x

UO 2.07 was characterized using neutron total scattering in order to elucidate defect morphology in the low oxygen-to-metal regime (x < 0.125 for UO 2+x ). Data were collected at temperatures (600 and 1000 °C) coinciding with the single-phase UO 2+x region of the established phase diagram, and results were compared with data of stoichiometric UO 2 collected at near-identical temperatures. Experimental data were modeled and interpreted using a holistic approach employing a combination of analyses that characterized multiple spatial length scales. Preferential modeling of long-range atomic arrangements with Rietveld refinement suggests the existence of primarily monointerstitials in UO 2.07 , whereas preferential modeling of short-range atomic structures with small-box pair distribution function (PDF) refinement indicates the presence of defect clusters in UO 2.07 . Simultaneous modeling of multiple length scales using complementary reverse Monte Carlo (RMC) and molecular dynamics (MD) methods confirms that excess oxygen atoms in UO 2.07 exist as small defects, such as monointerstitials and di-interstitials. RMC and MD results agree with diffraction analysis but differ significantly from small-box PDF refinements, which may be related to a lack of intermediate- and long-range structural information gained from the small-box PDF refinement procedure. Employing a combination of analysis methods with varying length-scale sensitivities enabled more accurate assessment of the UO 2+x defect structure. Furthermore, our findings provide experimental support for previously predicted di-interstitial defect morphologies in UO 2+x that highly influence the accurate prediction of bulk physiochemical properties of UO 2+x , such as oxygen diffusivity.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Clinical Efficacy of Transjugular Intrahepatic Portosystemic Shunt Created with Expanded Polytetrafluoroethylene-Covered Stent-Grafts: 8-mm Versus 10-mm

Purpose: Conflicting data exist regarding the appropriate shunt diameter for transjugular intrahepatic portosystemic shunt (TIPS) creation in cirrhotic patients. This study was designed to compare the clinical efficacy of TIPS using stent-grafts with 8- and 10-mm diameters. Methods: In this retrospective study, cirrhotic patients who underwent TIPS technical successfully for the prevention of variceal rebleeding from December 2011 to June 2015 were included. Thirty-four patients with 8-mm TIPS and 380 patients with 10-mm TIPS were identified. Propensity score matching method produced 32 patients in each group for comparison. Results: Baseline characteristics between two groups were comparable. There was no significant difference in variceal rebleeding rate between the two groups. The cumulative incidence of variceal rebleeding after 1 and 3 years was 6.4% and 35.5% in the 8-mm group, respectively, and 14.2% and 24.9% in the 10-mm group, respectively (P = 0.663). 8-mm TIPS conferred a significant decrease in hepatic encephalopathy (HE) rate compared with the 10-mm TIPS (16.1 vs. 32.6% at 1 year, 27.8 vs. 53.2% at 3 years, P = 0.034). The cumulative survival rates were similar between the two groups: 93.3% and 79.6% at 1 and 3 years, respectively, in the 8-mm TIPS group vs. 87.3% and 72.1% at 1 and 3 years, respectively, in the 10-mm TIPS group (P = 0.451). Conclusion: The placement of 8-mm TIPS was sufficient to decompress the portal hypertension and prevent variceal rebleeding. The use of the 8-mm stent-graft can decrease HE rates compared with 10-mm stent-graft, although no survival benefit was observed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Evidence for moiré excitons in van der Waals heterostructures

Recent advances in the isolation and stacking of monolayers of van der Waals materials have provided approaches for the preparation of quantum materials in the ultimate two-dimensional limit(1,2). In van der Waals heterostructures formed by stacking two monolayer semiconductors, lattice mismatch or rotational misalignment introduces an in-plane moire superlattice(3). It is widely recognized that the moire superlattice can modulate the electronic band structure of the material and lead to transport properties such as unconventional superconductivity(4) and insulating behaviour driven by correlations(5-7); however, the influence of the moire superlattice on optical properties has not been investigated experimentally. Here we report the observation of multiple interlayer exciton resonances with either positive or negative circularly polarized emission in a molybdenum diselenide/tungsten diselenide (MoSe 2 /WSe 2 ) heterobilayer with a small twist angle. We attribute these resonances to excitonic ground and excited states confined within the moire potential. This interpretation is supported by recombination dynamics and by the dependence of these interlayer exciton resonances on twist angle and temperature. These results suggest the feasibility of engineering artificial excitonic crystals using van der Waals heterostructures for nanophotonics and quantum information applications.

42 ENGINEERING↗

IL‐10 derived from M2 macrophage promotes cancer stemness via JAK1/STAT1/NF‐κB/Notch1 pathway in non‐small cell lung cancer

Tumor‐associated macrophages (TAMs), key immune cells in the tumor microenvironment, are shown to be closely correlated with the progression of non‐small cell lung cancer (NSCLC). Cancer stem cells (CSCs) can contribute to NSCLC progression as well. We aimed to clarify whether TAMs promote the progression of NSCLC by mainly affecting the activities of CSCs. We found that TAM‐like cells promoted CSC‐like properties in NSCLC cells in vitro , which was mediated by TAM‐derived IL‐10. TAM‐derived IL‐10 promoted CSC‐like properties of NSCLC cells through JAK1/STAT1/NF‐κB/Notch1 signaling. Blockade of IL‐10/JAK1 signaling inhibited TAM‐mediated NSCLC tumor growth in vivo , and the TAM‐mediated expression of CSC‐related and mesenchymal‐related genes in NSCLC. Lastly, expression levels of these signaling molecules were significantly correlated with survival of NSCLC patients. Therefore, IL‐10/JAK1 signaling might be a potential therapeutic target for NSCLC treatment.

Yang, Li↗

Experimental and Numerical Analysis of Additively Manufactured Coupons With Parallel Channels and Inline Wall Jets

Present paper developed a series of additively manufactured parallel cooling channels with streamwise wall jets inside, which could be suitable for double-wall and near-wall cooling configurations in gas turbine hot section components. The tested coupons consisted of parallel channels, each channel further divided into small chambers using several spanwise separation walls. Height of these walls was kept less than channel height, thus forming a slot with one of the end walls. Coolant entered from one side of channel and formed streamwise wall jet while crossing through the slot over to the downstream chamber. The test coupons were additively manufactured by selective laser sintering (SLS) technique using Inconel 718 alloy. Steady-state heat transfer experiments with constant wall temperature boundary condition were performed to analyze effect of pitch between subsequent slots and blockage ratio (ratio of separation wall height to channel height) on heat transfer. The channel Reynolds number ranged from 1800 to 5000. Numerical simulations were performed using ANSYS cfx solver with SST k–ω turbulence model to obtain detailed understanding of existing flow field. Experimental results showed heat transfer enhancement of up to 6.5 times that of a smooth channel for the highest blockage ratio of 0.75. Numerical results revealed complex flow field which consisted of wall jets along with impingement, separation, and recirculation zones in each chamber. For all configurations, gain in heat transfer was accompanied with high pressure drops. However, coupled with the high heat transfer, this design could lead to potential coolant savings.

Engineering↗

Experimental Investigation on Additively Manufactured Transpiration and Film Cooling Structures

The last 50 years has witnessed significant improvement in film cooling technologies while transpiration cooling is still not implemented in turbine airfoil cooling. Although transpiration cooling could provide higher cooling efficiency with less coolant consumption compared to film cooling, the fine pore structure and high porosity in transpiration cooling metal media always raised difficulties in conventional manufacturing. Recently, the rapid development of additive manufacturing (AM) has provided a new perspective to address such challenge. With the capability of the innovative powder bed selective laser metal sintering (SLMS) AM technology, the complex geometries of transpiration cooling part could be precisely fabricated and endued with improved mechanical strength. This study utilized the SLMS AM technology to fabricate the transpiration cooling and film cooling structures with Inconel 718 superalloy. Five different types of porous media including two perforated plates with different hole pitches, metal sphere packing, metal wire mesh, and blood vessel shaped passages for transpiration cooling were fabricated by EOS M290 system. One laidback fan-shaped film cooling coupon was also fabricated with the same printing process as the control group. Heat transfer tests under three different coolant mass flow rates and four different mainstream temperatures were conducted to evaluate the cooling performance of the printed coupons. The effects of geometry parameters including porosity, surface outlet area ratio, and internal solid–fluid interface area ratio were investigated as well. The results showed that the transpiration cooling structures generally had higher cooling effectiveness than film cooling structure. The overall average cooling effectiveness of blood vessel-shaped transpiration cooling reached 0.35, 0.5, and 0.57, respectively, with low (1.2%), medium (2.4%), and high (3.6%) coolant injection ratios. The morphological parameters analysis showed the major factor that affected the cooling effectiveness most was the internal solid–fluid interface area ratio for transpiration cooling. This study showed that additive manufactured transpiration cooling could be a promising alternative method for turbine blade cooling and worthwhile for further investigations.

Engineering↗

Influence of Ca and Sr Addition on Impression Creep Behavior of Mg-4Al-RE Alloy

The impression creep behavior of Mg-4Al-RE-0.8Ca-0.2Sr (AEXJ4110) alloy was investigated under the applied stresses of 55, 75, 95 MPa and the temperatures of 398, 423, 448 K on a special apparatus. The results showed that the microstructure of AEXJ4110 alloy consisted of acicular Al{sub 11}La{sub 3}, granular Al{sub 2}La, bone shape Al{sub 2}Ca and fish-bone shape Al{sub 4}Sr. The impression creep resistance of AE41 alloy was improved by adding Ca and Sr. The primary impression creep depth of AEXJ4110 alloy was increased with increasing applied stress and temperature. The creep strain rates of AEXJ4110 alloy under different stresses and temperatures were a power function of time. The constitutive equation of steady-state impression creep for AEXJ4110 alloy can be written as ε-dot {sub s}=9.71×10{sup −3}(E/T)(σ/E){sup 4.3}exp ((−100.449+3368.98(σ/E))/RT) with stress exponent n 4.3 and creep activation energy Q{sub c} about 100.449 kJ/mol. The impression creep mechanism of AEXJ4110 alloy in the temperature range of 398-448 K and stress range of 55-95 MPa is controlled by dislocation climb dominated by self-diffusion of magnesium atoms impeded by the precipitated phases with high melting temperatures.

36 MATERIALS SCIENCE↗

Long non-coding RNA, Bmcob, regulates osteoblastic differentiation of bone marrow mesenchymal stem cells

Disordered osteoblastic differentiation of bone marrow mesenchymal stem cells (BMSCs) contributes to bone loss. The underlying mechanisms are complicated and not fully understood. Long non-coding RNAs (lncRNAs) are emerging as an important regulatory factors on bone metabolism. Here, we discovered a novel lncRNA, Bmcob, which modulated osteogenic differentiation of primary mouse BMSCs. Expression levels of Bmcob were significantly upregulated in early-to-mid stages during osteoblast differentiation. Silencing of Bmcob suppressed osteoblastic differentiation of BMSCs in vitro, whereas its overexpression protected BMSCs from oxidative stress induced inhibition on osteogenesis. Subsequently, we discovered that selenoprotein P (Sepp1), which is located next to the Bmcob gene, was partly responsible for the regulatory effects of Bmcob. In addition, a series of selenoproteins were downregulated in BMSCs with Bmcob knockdown. Mechanistically, we found Bmcob was associated with selenocysteine insertion sequence binding protein 2 (SBP2), a critical trans-acting factor for selenoprotein synthesis. Finally, we suggest an explanatory hypothesis that through modulating nucleocytoplasmic shuttling of SBP2, Bmcob regulates a number of selenoproteins expression, including sepp1, and then mediates osteogenesis of BMSCs. Taken together, our results revealed a novel mechanism regulating osteogenesis of BMSCs and may function as a potential target for treating osteoporosis.

60 APPLIED LIFE SCIENCES↗

Long non-coding RNA KCNQ1OT1 modulates oxaliplatin resistance in hepatocellular carcinoma through miR-7-5p/ ABCC1 axis

Highlights: • KCNQ1OT1 was significantly up-regulated in oxaliplatin-resistant HCC cells. • Knockdown of KCNQ1OT1 inhibited the cell proliferation, migration, invasion. • KCNQ1OT1 modulated oxaliplatin resistance in HCC through miR-7-5p/ ABCC1 axis. The underlying functions of long non-coding RNAs (lncRNAs) on chemoresistance in multiple cancers have been testified. However, the function and mechanism of lncRNAs on chemoresistance in hepatocellular carcinoma are still confused. In this study, we concentrated on the function and mechanism of KCNQ1OT1 on oxaliplatin resistance in hepatocellular carcinoma. Results showed that KCNQ1OT1 was significantly up-regulated in oxaliplatin-resistant HepG2 and Huh7 cells. Moreover, knockdown of KCNQ1OT1 inhibited the cell proliferation, migration, invasion and reduced the expression of drug-resistant gene (MRP5, MDR1, LRP1). Additionally, bioinformatics analysis and dual-luciferase reporter assay showed that miR-7-5p directly targeted the 3′-UTR of miR-7-5p and ABCC1 mRNA, indicating that KCNQ1OT1 regulated the expression of ABCC1 via endogenous sponging miR-7-5p. Conclusively, KCNQ1OT1 modulated oxaliplatin resistance in hepatocellular carcinoma through miR-7-5p/ABCC1 axis, indicating a novel approach for the treatment of hepatocellular carcinoma.

60 APPLIED LIFE SCIENCES↗

Surgical trauma contributes to progression of colon cancer by downregulating CXCL4 and recruiting MDSCs

Highlights: • Laparotomy promotes tumor growth and angiogenesis in vivo. • Laparotomy results in a decrease of CXCL4 expression. • CXCL4 inhibits tumor growth and angiogenesis. • CXCL4 inhibits the recruitment of myeloid-derived suppressor cells. • The expression of CXCL4 and MDSC percentage are correlated with clinical overall survival rates. Surgical stress has been shown to facilitate the tumor growth and metastasis of colon cancer. To unravel the mechanisms underlying surgery induced-colon cancer progression, a syngeneic transplantation tumor model was established with murine colon cancer CT26 cells and the effect of laparotomy on tumor progression was investigated. Especially the expression of several CXC chemokines was assayed, and its roles in regulating myeloid-derived suppressor cells (MDSCs) recruitment were analyzed. We found that laparotomy promoted in vivo tumor growth and angiogenesis. CXCL4 expression was significantly downregulated by laparotomy in the tumor tissue and the peritoneal cavity. Functionally, CXCL4 overexpression significantly reduces tumor volume compared to control. Through analysis of CD11b{sup +}/Gr1{sup +} MDSCs cell, we found an upregulated proportion of MDSCs in the tumor tissues and peritoneal cavity following laparotomy, and this enhancement was blocked after CXCL4 overexpression. Further, a negative correlation was found between CXCL4 expression and MDSC amounts in clinical samples. Higher CXCL4 expression and lower MDSCs proportion is positively related to overall survival.

60 APPLIED LIFE SCIENCES↗

High-pressure investigations on the semi-Heusler compound CuMnSb

The antiferromagnetic semi-Heusler compound CuMnSb has been investigated under high pressure by electrical resistivity and angle dispersive synchrotron x-ray diffraction measurements to 53 and 36 GPa, respectively. The Néel temperature at ~50 K is found to initially increase rapidly with pressure, reaching 83 K at 7 GPa. However, near 8 GPa at ambient temperature a sluggish first-order structural transition begins from a semimetallic cubic phase to a likely semimetallic tetragonal phase; thermal cycling to 355°C at 9.6 GPa serves to complete the transition. In the tetragonal phase no sign of magnetic ordering is visible in the resistivity R ( T ) over the measured temperature range 4–295 K. This suggests that magnetic ordering may have shifted to temperatures well above ambient. Indeed, density functional calculations find the magnetic ground state in the tetragonal phase to be antiferromagnetic. In conclusion, following decompression to 1 bar at ambient temperature, the high-pressure tetragonal phase is retained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Energetics of hydrogen and helium-vacancy complexes in bulk and near surfaces of tungsten: First-principles study

Understanding the interaction between hydrogen (H) and helium-vacancy (He-V) complexes in tungsten (W) is important for the development of plasma-facing materials in fusion reactors. H trapping by He x V y complexes in bulk W, as well as the H solution behavior and H trapping by He x V complexes near W(100), W(111), and W(110) surfaces, has been investigated by first-principles computer simulations using density function theory. The results show that the sequential H binding energies to He x V complexes in bulk W decrease with the increasing number of H and He. For the He x V 2 complexes in bulk W, H prefers to trap at interstitial sites near the junction of the di-vacancy, where the H can minimize the isosurface of optimal charge density. The most stable interstitial sites for H below W surfaces are dependent on the surface orientation. Our calculations indicate that H atoms tend to prefer a depth of 0.3 nm below the W(100) and W(111) surfaces due to the surface reconstruction. Here, the binding energy of H to a HeV complex near W surfaces has the most significant orientation dependence below the W(111) surface, followed by the W(100) and W(110) surfaces. Compared with the bulk value, the largest difference in the average binding energy of H to the stable He x V complexes at the three W surfaces is about 0.2 eV. Furthermore, the effect of surfaces on the H binding energy to He x V complexes can be ignored for depths greater than 0.65 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles study of stability of helium-vacancy complexes below tungsten surfaces

Density function theory calculations have been performed to study the stability of small helium-vacancy (He-V) complexes near tungsten (W) surfaces of different orientations. The results show that the stability of vacancies and He-V complexes near W surfaces depends on surface orientation. However, as the depth below the surface increased beyond about 0.65–0.8 nm, the stability of He-V complexes is similar to the bulk. The formation energies of single vacancies and di-vacancies at depths less than 0.2 nm below the W(110) surface are higher than for W(100) or W(111) surfaces, but have lower energies at depths between 0.2 and 0.65 nm. The formation energies of He-V complexes below W surfaces are sensitive to the geometric orientation of the He and vacancy, especially below the W(111) surface. Within about 0.2 nm of the top layer of the three W surfaces, neither a vacancy nor a di-vacancy can trap He. Because of the lower formation energy of He-V complexes and higher He binding energy to vacancies below the W(110) surface, the He desorption from the W(110) surface is less likely to occur than from the W(100) and W(111) surfaces. Here, our results provide fundamental insight into the differences in surface morphology changes observed in single W crystals with different surface orientations under He plasma exposure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SeTe alloy semiconductor core optical fibers

Highlights: • Phosphate glass-clad Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers were fabricated. • Crystalline Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers were successfully obtained. • The fibers can detect light incident on it from at any point along its entire length. • The fibers can be used as stress sensing without the use of optical probing signals. - Abstract: Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers with phosphate glass cladding were fabricated by using a reactive molten core approach. The core was found to be amorphous with some oxygen diffusing in from the cladding glass. Crystalline Se{sub 0.5}Te{sub 0.5} (c-Se{sub 0.5}Te{sub 0.5}) semiconductor core fibers were obtained by a post-drawing annealing process. Significant disparities in conductivity under stress and without stress were observed in c-Se{sub 0.5}Te{sub 0.5} semiconductor core fibers. To the best of our knowledge, this is the first time that stress sensing can be realized in c-Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers. This is in contrast to all previous work on stress sensing using fibers, which require the use of optical probing signals. In addition, it is found that more than 60 times change in conductivity between dark and illuminated states in c-Se{sub 0.5}Te{sub 0.5} semiconductor core fibers. These results demonstrate that c-Se{sub 0.5}Te{sub 0.5} semiconductor core optical fibers have promising applications in stress sensor, photodetector, and optical switch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on the Reliability of Carbon Nanotube-Reinforced Sn-58Bi Lead-Free Solder Joints

The wettability, microstructure and mechanical properties of multi-walled carbon nanotube (CNT)-reinforced Sn-58Bi composite solder joints were investigated. The results indicate that the wettability of the Sn-58Bi solder is improved and the growth of interfacial intermetallic (IMC) compounds for solder joints is restrained by CNTs. The thickness of the IMC layers is decreased with increasing CNTs concentration. The microstructure of the Sn-58Bi composite solders is refined, the maximum tensile strength and shear strength are obtained by adding the optimum CNTs content about 0.01 wt.%. However, excessive content of CNTs addition can deteriorate the properties. The creep rupture life of Sn-58Bi solder joint and Sn-58Bi-0.01CNTs solder joint is decreased with increasing load, temperature and current density. The average creep rupture life of Sn-58Bi-0.01CNTs composite solder joint is 60% higher than that of the plain solder joint.

77 NANOSCIENCE AND NANOTECHNOLOGY↗