Engineering Papers⌕ Search

Engineering topics

Yang, Lei

Publications and source records attributed to Yang, Lei.

88 records · Page 5

Polaronic quantum master equation theory of inelastic and coherent resonance energy transfer for soft systems

This work extends the theory of coherent resonance energy transfer [S. Jang, J. Chem. Phys. 131, 164101 (2009)] by including quantum mechanical inelastic effects due to modulation of donor-acceptor electronic coupling. Within the approach of the second order time local quantum master equation (QME) in the polaron picture and under the assumption that the bath degrees of freedom modulating the electronic coupling are independent of other modes, a general time evolution equation for the reduced system density operator is derived. Detailed expressions for the relaxation operators and inhomogeneous terms of the QME are then derived for three specific models of modulation in distance, axial angle, and dihedral angle, which are all approximated by harmonic oscillators. Numerical tests are conducted for a set of model parameters. Model calculation shows that the torsional modulation can make significant contribution to the relaxation and dephasing mechanisms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Promotion of Water-mediated Carbon Removal by Nanostructured Barium Oxide/nickel Interfaces

The existing Ni-yttria-stabilized zirconia anodes in solid oxide fuel cells (SOFCs) perform poorly in carbon-containing fuels because of coking and deactivation at desired operating temperatures. Here we report a new anode with nanostructured barium oxide/nickel (BaO/Ni) interfaces for low-cost SOFCs, demonstrating high power density and stability in C{sub 3}H{sub 8}, CO and gasified carbon fuels at 750 C. Synchrotron-based X-ray analyses and microscopy reveal that nanosized BaO islands grow on the Ni surface, creating numerous nanostructured BaO/Ni interfaces that readily adsorb water and facilitate water-mediated carbon removal reactions. Density functional theory calculations predict that the dissociated OH from H2O on BaO reacts with C on Ni near the BaO/Ni interface to produce CO and H species, which are then electrochemically oxidized at the triple-phase boundaries of the anode. This anode offers potential for ushering in a new generation of SOFCs for efficient, low-emission conversion of readily available fuels to electricity.

30 DIRECT ENERGY CONVERSION↗

Anode-supported tubular SOFCs based on BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3-δ electrolyte fabricated by dip coating

Anode-supported tubular solid oxide fuel cells (SOFCs) based on a proton and oxide ion mixed conductor, BaZr0.1Ce0.7Y0.1Yb0.1O3 - δ (BZCYYb), have been fabricated using a dip coating and co-firing process. This new fabrication technique effectively reduced the Ohmic resistances of tubular cells to ~ 0.1 and ~ 0.3 Ω cm2 at 750 and 600 °C, respectively. Typical tubular cells with Ni-BZCYYb anode, BZCYYb electrolyte, and La0.6Sr0.4Co0.2Fe0.8O3 - δ (LSCF)-BZCYYb composite cathode demonstrated much-improved performance, achieving peak power densities of 1.13, 0.81, 0.63, and 0.53 W cm- 2 at 750, 700, 650, and 600 °C, respectively, when humidified (3 v% water vapor) hydrogen was used as fuel and ambient air as oxidant.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhancement of La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ Durability and Surface Electro-catalytic Activity by La 0.85 Sr 0.15 MnO 3-δ Investigated using a New Test Electrode Platform

A carefully designed test cell platform with a new electrode structure is utilized to determine the intrinsic surface catalytic properties of an electrode. With this design, the electrocatalytic activity and stability of an La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) cathode is enhanced by a dense thin La 0.85 Sr 0.15 MnO 3±δ (LSM) coating, suggesting that an efficient electrode architecture has been demonstrated that can make effective use of desirable properties of two different materials: fast ionic and electronic transport in the backbone (LSCF) and facile surface kinetics on the thin-film coating (LSM). Theoretical analyses suggest that the enhanced electrocatalytic activity of LSM-coated LSCF is attributed possibly to surface activation under cathodic polarization due to the promotion of oxygen adsorption and/or dissociation by the surface layer and the dramatically increased oxygen vacancy population in the surface film. Further, the observed time-dependent activation over a few hundreds of hours and durability are likely associated with the formation of a favorable hybrid surface phase intermediate between LSM and LSCF. This efficient electrode architecture was successfully applied to the state-of-the-art LSCF-based cathodes by a simple solution infiltration process, achieving reduced interfacial resistance and improved stability under fuel cell operating conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrical conductivity and electrochemical performance of cobalt-doped BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ cathode

To develop efficient cathode materials for solid oxide fuel cells (SOFCs) based on Ba(Zr 0.1 Ce 0.7 Y 0.2 )O 3-δ (BZCY) electrolyte, we have examined a series of cobalt-doped BZCY samples with the intended composition of BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ (where x = 0, 0.02, 0.05, 0.075, 0.1, 0.2). It is found that the solubility of cobalt is less than 10 mol% and the electrical conductivity of BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ decreased with the content of cobalt within this solubility. When the content of cobalt is greater than its solubility, a BaCoO 3 -based phase forms, which markedly increases the conductivity of the sample (e.g., 2.48 S/cm for a composite material with an intended composition of BaZr 0.1 Ce 0.7 Y 0.2 O 3-δ at 700 °C). Typical cells with the cobalt-doped BZCY cathode display much-improved performance than cells with other transition metal doped barium cerate ever reported, yielding a polarization resistance of 0.085 Ω cm 2 at 750 °C.

08 HYDROGEN↗

Theoretical Investigation of the Mechanism and Dynamics of Intramolecular Coherent Resonance Energy Transfer in Soft Molecules: A Case Study of Dithia-anthracenophane

A computational study is conducted on dithia-anthracenophane (DTA), for which there is experimental evidence for coherent resonance energy transfer dynamics, and on dimethylanthracene (DMA), a molecule representing the energy donor and the acceptor in DTA. Electronic excitation energies are calculated by configuration interaction singles (CIS) and time-dependent density functional theory (TDDFT) methods and are compared to experimental ones. Electronic coupling constants are calculated between two DMAs embedded into the ground-state structure of DTA employing methods based on transition densities. The resulting values of electronic coupling provide a more consistent interpretation of experiments than those based on one-half the level spacing of DTA excitation energies. Solvation effects are studied based on the polarizable continuum model (PCM). Solvent-induced polarization and screening effects are shown to make opposite contributions, and the net electronic coupling is little different from the value in a vacuum. The likelihood of coherent population transfer is assessed on the basis of a recently developed theory of coherent resonance energy transfer. The time scale of bath is shown to have an important role in sustaining the quantum coherence. The combination of quantum chemical and dynamical data suggests that the electronic coupling in DTA is in the range of 50-100 cm -1 . The presence of oscillatory excitation population dynamics can be understood from the picture of polaronic excitation moderately dressed with dispersive vibrational modes. The effect of torsional modulation on the excitation energies of DTA and electronic coupling is examined on the basis of optimized structures with the torsional angle constrained. The result suggests that inelastic effect due to torsional motion cannot be disregarded in DTA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simulation of a photovoltaic/thermal heat pump system having a modified collector/evaporator

A new photovoltaic/thermal heat pump (PV/T-HP) system having a modified collector/evaporator (C/E) has been developed and numerically studied. Multi-port flat extruded aluminum tubes were used in the modified C/E, as compared to round copper tubes used in a conventional C/E. Simulation results suggested that a better operating performance can be achieved for a PV/T-HP system having such a modified C/E. In addition, using the meteorological data in both Nanjing and Hong Kong, China, the simulation results showed that this new PV/T-HP system could efficiently generate electricity and thermal energy simultaneously in both cities all-year-round. Furthermore, improved operation by using variable speed compressor has been designed and discussed. (author)

14 SOLAR ENERGY↗

Novel Sulfur-Tolerant Anodes for Solid Oxide Fuel Cells

One of the unique advantages of SOFCs over other types of fuel cells is the potential for direct utilization of hydrocarbon fuels (it may involve internal reforming). Unfortunately, most hydrocarbon fuels contain sulfur, which would dramatically degrade SOFC performance at parts-per-million (ppm) levels. Low concentration of sulfur (ppm or below) is difficult to remove efficiently and cost-effectively. Therefore, knowing the exact poisoning process for state-of-the-art anode-supported SOFCs with Ni-YSZ cermet anodes, understanding the detailed anode poisoning mechanism, and developing new sulfur-tolerant anodes are essential to the promotion of SOFCs that run on hydrocarbon fuels. The effect of cell operating conditions (including temperature, H{sub 2}S concentration, cell voltage/current density, etc.) on sulfur poisoning and recovery of nickel-based anode in SOFCs was investigated. It was found that sulfur poisoning is more severe at lower temperature, higher H{sub 2}S concentration or lower cell current density (higher cell voltage). In-situ Raman spectroscopy identified the nickel sulfide formation process on the surface of a Ni-YSZ electrode and the corresponding morphology change as the sample was cooled in H{sub 2}S-containing fuel. Quantum chemical calculations predicted a new S-Ni phase diagram with a region of sulfur adsorption on Ni surfaces, corresponding to sulfur poisoning of Ni-YSZ anodes under typical SOFC operating conditions. Further, quantum chemical calculations were used to predict the adsorption energy and bond length for sulfur and hydrogen atoms on various metal surfaces. Surface modification of Ni-YSZ anode by thin Nb{sub 2}O{sub 5} coating was utilized to enhance the sulfur tolerance. A multi-cell testing system was designed and constructed which is capable of simultaneously performing electrochemical tests of 12 button cells in fuels with four different concentrations of H{sub 2}S. Through systematical study of state-of-the-art anode-supported SOFC button cells, it is seen that the long-term sulfur poisoning behavior of those cells indicate that there might be a second-stage slower degradation due to sulfur poisoning, which would last for a thousand hour or even longer. However, when using G-18 sealant from PNNL, the 2nd stage poisoning was effectively prohibited.

01 COAL, LIGNITE, AND PEAT↗

Functionally Graded Cathodes for Solid Oxide Fuel Cells

The main objective of this DOE project is to demonstrate that the performance and long-term stability of the state-of-the-art LSCF cathode can be enhanced by a catalytically active coating (e.g., LSM or SSC). We have successfully developed a methodology for reliably evaluating the intrinsic surface catalytic properties of cathode materials. One of the key components of the test cell is a dense LSCF film, which will function as the current collector for the electrode material under evaluation to eliminate the effect of ionic and electronic transport. Since it is dense, the effect of geometry would be eliminated as well. From the dependence of the electrode polarization resistance on the thickness of a dense LSCF electrode and on partial pressure of oxygen, we have confirmed that the surface catalytic activity of LSCF limits the performances of LSCF-based cathodes. Further, we have demonstrated, using test cells of different configurations, that the performance of LSCF-based electrodes can be significantly enhanced by infiltration of a thin film of LSM or SSC. In addition, the stability of LSCF-based cathodes was also improved by infiltration of LSM or SSC. While the concept feasibility of the electrode architecture is demonstrated, many details are yet to be determined. For example, it is not clear how the surface morphology, composition, and thickness of the coatings change under operating conditions over time, how these changes influence the electrochemical behavior of the cathodes, and how to control the microscopic details of the coatings in order to optimize the performance. The selection of the catalytic materials as well as the detailed microstructures of the porous LSCF and the catalyst layer may critically impact the performance of the proposed cathodes. Further, other fundamental questions still remain; it is not clear why the degradation rates of LSCF cathodes are relatively high, why a LSM coating improves the stability of LSCF cathodes, which catalysts would be most effective for LSCF, and how to achieve further enhancement of the performance and stability of SOFC cathodes.

30 DIRECT ENERGY CONVERSION↗