Engineering topics
Yang, Dong
Publications and source records attributed to Yang, Dong.
Strain-relaxed tetragonal MAPbI 3 results in efficient mesoporous solar cells
In mesoporous organo-halide perovskite solar cells, the coexistence of tetragonal phase and cubic phase in the perovskite layer is found to result in strained crystal structure at the mesoporous TiO 2 (mp-TiO 2 )/perovskite heterointerface. This results in structural defects pinholes, grain boundaries, and interfacial porosity which is detrimental towards photovoltaic performance and device stability. The strain at the interface originates from the lattice mismatch between the mp-TiO 2 nanoparticles (NPs) and perovskite. Here, a transformative approach is demonstrated to realize relaxed and high purity tetragonal phase MAPbI 3 (RP) near the mp-TiO 2 interface region. This approach involves inserting a ~2 nm lattice matched buffer layer of cubic CsPbBr 3 between mp-TiO 2 NPs and MAPbI 3 , which serves as a template for epitaxial growth for top MAPbI 3 . As a result, the solar cell with relaxed MAPbI3 shows a power conversion efficiency (PCE) of 22.12% with significantly enhanced environmental, light, and thermal stability.
Dialing in Catalytic Sites on Metal Organic Framework Nodes: MIL-53(Al) and MIL-68(Al) Probed with Methanol Dehydration Catalysis
Many metal organic frameworks (MOFs) incorporate metal oxide clusters as nodes. Node sites where linkers are missing can be catalytic sites. We now show how to dial in the number and occupancy of such sites in MIL-53 and MIL-68, which incorporate aluminum-oxide-like nodes. Here, the methods involve modulators used in synthesis and postsynthesis reactions to control the modulator-derived groups on these sites. We illustrate the methods using formic acid as a modulator, giving formate ligands on the sites, and these can be removed to leave μ 2 -OH groups and open Lewis acid sites. Methanol dehydration was used as a catalytic reaction to probe these sites, with infrared spectra giving evidence of methoxide ligands as reaction intermediates. Control of node surface chemistry opens the door for placement of a variety of ligands on a wide range of metal oxide cluster nodes for dialing in reactivity and catalytic properties of a potentially immense class of structurally well-defined materials.
All Electrospray Printing of Carbon–Based Cost–Effective Perovskite Solar Cells
With the power conversion efficiencies of PSCs exceeding 25%, the perovskite solar cells (PSCs) are closer to step into the initial industrialization. Prior to transferring from laboratory fabrication to industrial manufacturing, issues such as scalability, materials cost, and production line compatibility that significantly impact the manufacturing remain to be addressed. Here we report breakthroughs on all these fronts. Carbon-based PSCs with architecture FTO/electron transport layer/perovskite/carbon, that eliminate the need for the hole transport layer and noble metal electrode, provide ultra-low-cost configuration. This PSC architecture was manufactured using a scalable and industrially compatible electrospray (ES) technique, which enables continuous printing of all the cell layers. The ES deposited electron transport layer and perovskite layer exhibited properties comparable to that of the laboratory-scale spin coating method. The ES deposited carbon electrode layer exhibited superior conductivity and interfacial microstructure in comparison to films synthesized using the conventional doctor blading technique. As a result, the fully ES printed carbon-based PSCs showed a record 14.41% power conversion efficiency, rivaling the state-of-the-art hole transporter-free PSCs. Furthermore, these results will immediately have an impact on the scalable production of PSCs.
International network of nuclear structure and decay data evaluators
Compilation, evaluation and dissemination of nuclear data are arduous tasks that rely on contributions from experts in both the basic and applied sciences communities whose efforts are coordinated by the International Atomic Energy Agency (IAEA). The Evaluated Nuclear Structure Data File (ENSDF) includes the most extensive and comprehensive set of nuclear structure and decay data evaluations performed by the international network of Nuclear Structure and Decay Data evaluators (NSDD) under the auspices of the IAEA. In this report we describe the recent NSDD activities supported by the IAEA and provide some future perspectives.
The Surface Chemistry of Metal Oxide Clusters: From Metal–Organic Frameworks to Minerals
Not Available
Tuning Catalytic Sites on Zr 6 O 8 Metal–Organic Framework Nodes via Ligand and Defect Chemistry Probed with tert -Butyl Alcohol Dehydration to Isobutylene
Metal–organic frameworks (MOFs) have drawn wide attention as candidate catalysts, but some essential questions about their nature and performance have barely been addressed. (1) How do OH groups on MOF nodes act as catalytic sites? (2) What are the relationships among these groups, node defects, and MOF stability, and how do reaction conditions influence them? (3) What are the interplays between catalytic properties and transport limitations? To address these questions, we report an experimental and theoretical investigation of the catalytic dehydration of tert -butyl alcohol (TBA) used to probe the activities of OH groups of Zr 6 O 8 nodes in the MOFs UiO-66 and MOF-808, which have different densities of vacancy sites and different pore sizes. The results show that (1) terminal node OH groups are formed as formate and/or acetate ligands present initially on the nodes react with TBA to form esters, (2) these OH groups act as catalytic sites for TBA dehydration to isobutylene, and (3) TBA also reacts to break node–linker bonds to form esters and thereby unzip the MOFs. The small pores of UiO-66 limit the access of TBA and the reaction with the formate/acetate ligands bound within the pores, whereas the larger pores of MOF-808 facilitate transport and favor reaction in the MOF interior. However, after removal of the formate and acetate ligands by reaction with methanol to form esters, interior active sites in UiO-66 become accessible for the reaction of TBA, with the activity depending on the density of defect sites with terminal OH groups. The number of vacancies on the nodes is important in determining a tradeoff between the catalytic activity of a MOF and its resistance to unzipping. Computations at the level of density functional theory show how the terminal OH groups on node vacancies act as Brønsted bases, facilitating TBA dehydration via a carbocation intermediate in an E1 mechanism; the calculations further illuminate the comparable chemistry of the unzipping.
Synthesis and characterization of tetrairidium clusters in the metal organic framework UiO-67: Catalyst for ethylene hydrogenation
Not provided.
Tuning Zr 12 O 22 Node Defects as Catalytic Sites in the Metal–Organic Framework hcp UiO-66
Defects in metal–organic frameworks (MOFs) play important roles in MOF reactivity and catalysis. Now, we report evidence of the reactivity and the quantitative characterization of the missing linker defects on the Zr 12 O 22 nodes in the MOF hcp UiO-66 (these are paired Zr 6 O 8 nodes bridged by OH groups) and those on the Zr 6 O 8 nodes of the MOF UiO-66. The defect sites catalyze the ring-opening reactions of epoxides with alcohols, and new sites formed by removal of bridging OH groups on the Zr 12 O 22 nodes also participate in the catalysis. The hcp UiO-66 was synthesized from UiO-66 and from molecular precursors, and, under various synthesis conditions, the nodes incorporated acetate ligands, where linkers were missing, and the number of these ligands was controlled by the synthesis conditions. These ligands are inhibitors of the catalytic reactions, and their removal by reaction with, for example, methanol (to form, for example, methyl acetate) preceded catalysis on the defect sites. The former MOF incorporated more defect sites than the latter, correspondingly being a more active catalyst. The defect sites on the Zr 12 O 22 nodes are 2–6 times more active per site than those on the isolated Zr 6 O 8 nodes, with the node-bridging OH groups increasing the catalytic activity of the neighboring node defect sites because new sites are formed by their removal. In conclusion, the results help point the way to the design and control of catalytic sites on metal oxide-like MOF nodes by tuning of the number and reactivity of the defect sites.