Engineering Papers⌕ Search

Engineering topics

Yan, Yushan

Publications and source records attributed to Yan, Yushan.

At least 37 records · Page 2

Enabling Efficient Water Splitting with Advanced Materials Designed for High pH Membrane Interface

This project was focused on developing the durable, high-performance materials and interfaces for advanced water splitting, enabling a clear pathway for achieving <$2/Kg H2 (on scale) with efficiency of 43 kWh/kg H 2 via anion exchange membrane (AEM)-based electrolysis. We aimed to advance these final goals via an improved fundamental understanding of both hydrogen and oxygen evolution reactions (HER/OER) leading to novel platinum group metal (PGM)-free catalyst materials in conjunction with critical improvements in membrane and ionomers and gas evolution electrodes with corresponding characterization and testing. Northeastern University (NU) lead this effort focusing on catalyst development and characterization (both in situ and ex situ) while project partners lead improvements in ionomer and membrane materials and will aid in the development of specialized electrode and membrane electrode assemblies. In addition, close collaboration occured with the HydroGEN Energy Materials Network (EMN) National Laboratory consortium including efforts related to use of advanced ionomers, durability protocols and validation of electrolyzer materials (e.g. NREL), multiscale modeling and computation (e.g. LBNL), and molecular dynamics (MD) simulations of the membrane catalyst interface (e.g. SNL). The interactions with HydroGEN included exchange of data and materials as needed to facilitate project success.

08 HYDROGEN↗

Enabling Efficient Water Splitting with Advanced Materials Designed for High pH Membrane Interface

This research focuses on durable, high-performance materials and interfaces for advanced water splitting, enabling a clear pathway for achieving <$2/KgH2 (on scale) via anion exchange membrane (AEM)-based electrolysis. We aim to advance this goal via an improved fundamental understanding of both hydrogen and oxygen evolution reactions (HER/OER) leading to platinum group metal (PGM)-free catalyst materials. Here, we use NiFeCo and NiMo as OER and HER catalysts, respectively, in a full alkaline electrolysis cell. A thermally stable, multi-cation AEM is used to operate the cell at elevated temperatures thereby lowering the operating potential by increasing the kinetics of the respective catalytic reactions. The transition metal catalysts, paired with this novel AEM, have been used to achieve an operating potential of 1.79 V at 1 A/cm2. This potential is 300 mV lower than similar electrolysis cells equipped with PGM-based catalysts. We have also demonstrated the efficacy of the less caustic potassium carbonate solution as a replacement for potassium hydroxide as an electrolyte. By using a carbonate-based electrolyte, the hydroxide ion required for the anodic reaction is continuously replenished by re-establishing an equilibrium with water. This consideration, coupled with the reduced alkalinity of the carbonate solution, yields an electrolysis cell capable of sustained operation with minimal increase in operating potential.

Kendrick, Ian↗

High-performance ammonia oxidation catalysts for anion-exchange membrane direct ammonia fuel cells

Low-temperature direct ammonia fuel cells (DAFCs) use carbon-neutral ammonia as a fuel, which has attracted increasing attention recently due to ammonia's low source-to-tank energy cost, easy transport and storage, and wide availability. However, current DAFC technologies are greatly limited by the kinetically sluggish ammonia oxidation reaction (AOR) at the anode. Herein, we report an AOR catalyst, in which ternary PtIrZn nanoparticles with an average size of 2.3 ± 0.2 nm were highly dispersed on a binary composite support comprising cerium oxide (CeO 2 ) and zeolitic imidazolate framework-8 (ZIF-8)-derived carbon (PtIrZn/CeO 2 -ZIF-8) through a sonochemical-assisted synthesis method. Additionally, the PtIrZn alloy, with the aid of abundant OH ad provided by CeO 2 and uniform particle dispersibility contributed by porous ZIF-8 carbon (surface area: ~600 m 2 g -1 ), has shown highly efficient catalytic activity for the AOR in alkaline media, superior to that of commercial PtIr/C. The rotating disk electrode (RDE) results indicate a lower onset potential (0.35 vs. 0.43 V), relative to the reversible hydrogen electrode at room temperature, and a decreased activation energy (~36.7 vs. 50.8 kJ mol -1 ) relative to the PtIr/C catalyst. Notably, the PtIrZn/CeO 2 -ZIF-8 catalyst was assembled with a high-performance hydroxide anion-exchange membrane to fabricate an alkaline DAFC, reaching a peak power density of 91 mW cm -2 . Unlike in aqueous electrolytes, supports play a critical role in improving uniform ionomer distribution and mass transport in the anode. PtIrZn nanoparticles on silicon dioxide (SiO 2 ) integrated with carboxyl-functionalized carbon nanotubes (CNT–COOH) were further studied as the anode in a DAFC. A significantly enhanced peak power density of 314 mW cm -2 was achieved. Density functional theory calculations elucidated that Zn atoms in the PtIr alloy can reduce the theoretical limiting potential of *NH 2 dehydrogenation to *NH by ~0.1 V, which can be attributed to a Zn-modulated upshift of the Pt–Ir d-band that facilitates the N–H bond breakage.

25 ENERGY STORAGE↗

Water-Fed Hydroxide Exchange Membrane Electrolyzer Enabled by a Fluoride-Incorporated Nickel–Iron Oxyhydroxide Oxygen Evolution Electrode

Here, we have developed a dissolved oxygen and galvanic corrosion method to synthesize vertically aligned fluoride-incorporated nickel–iron oxyhydroxide nanosheet arrays on a compressed Ni foam as an efficient self-supported oxygen evolution electrode. It is integrated with poly(aryl piperidinium) hydroxide exchange membrane and ionomers with high ion exchange capacity into a hydroxide exchange membrane electrolyzer fed with pure water, which achieves a performance of 1020 mA cm –2 at 1.8 V and prevents the detachment of catalysts during continuous operation (>160 h at 200 mA cm –2 ). Furthermore, this work provides a potential pathway for massively producing low-cost hydrogen using intermittent renewable energy sources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrochemical devices and fuel cell systems

Electrochemical devices including electrochemical pumps (ECPs) and fuel cell systems comprising a fuel cell and an ECP are disclosed. In particular, this electrochemical device can be an ECP that comprises an anode, a cathode and an anion exchange polymer separating the anode from the cathode. The ECP can be coupled to a hydroxide exchange membrane fuel cell (HEMFC) that is disclosed herein as a fuel cell system. These devices can be used in methods for removing carbon dioxide from air and for generating electricity.

Yan, Yushan↗

Low temperature, ambient pressure electrochemical ammonia synthesis in alkaline media — Mechanistic studies and catalyst design. Final Report

Ammonia synthesis via the Haber-Bosch process is a pillar of modern agriculture, which converts the abundant but inert dinitrogen in the atmosphere to nitrogen-based fertilizers. Despite more than a century of optimization, the Haber-Bosch process remains energy intensive and reliant on fossil fuels and produces large amounts of CO 2 . Distributed and modular ammonia synthesis via the electrochemical nitrogen reduction reaction (ENRR) at or close to ambient conditions, powered by renewable electricity is an attractive alternative because it allows as needed production of ammonia, and in turn fertilizers. However, selective ENRR catalysts remain lacking. In this project, we systematically investigated two categories of catalytic materials, i.e., precious metals and transition metal nitrides, in the ENRR. Precious metals exhibit low activity and selectivity in the ENRR, which is in agreement with recent computational studies. Transition metal nitrides, especially VN, has been demonstrated as active and selective ENRR catalysts. We developed the first quantitative method to determine the amount of ammonia produced in the ENRR on N-containing containing catalysts in the membrane electrode assembly configuration. An initial ammonia production rate of 6.6 × 10 -10 mol s -1 mg -1 and a Faradaic efficiency of 6.0% at -0.1 V were reached on VN. After the initial deactivation, VN was shown to be stable in the ENRR for 116 hours with a steady state ammonia production rate of 1.1 × 10 -10 mol s -1 cm -2 . A vanadium oxynitride species was identified as the active phase in the ENRR via a combination of operando and ex situ characterization techniques. In addition, we established that the ENRR proceeded on transition metal nitrides via the Mars van Krevelen mechanism and determined the initial and steady state active site densities by developing a quantitative isotopic exchange method.

42 ENGINEERING↗

Understanding the pH Dependence of Underpotential Deposited Hydrogen on Platinum

Abstract Understanding the pH dependent shift of the oxidation peak of the underpotential deposited hydrogen (H upd ) in cyclic voltammograms on the Pt surface is of significance in terms of both the fundamentals of electrochemistry and the rational design of catalysts for the hydrogen oxidation/evolution reactions (HOR/HER). In this work, we provide compelling evidence that the pH dependent shift in the H upd peak on Pt surfaces is driven by the structure of interfacial water rather than the specific adsorption of cations on the electrode surface. Combined cyclic voltammetric and surface enhanced spectroscopic investigations using an organic cation and crown‐ether chelated alkali metal cations show that specific adsorption of metal and organic cations on the Pt surface at the conditions relevant to the HOR/HER is unlikely. The vibrational band corresponding to strongly bound water is monitored when the electrode potential is varied in the H upd range in both acid and base.

Yang, Xuan↗

Understanding the pH Dependence of Underpotential Deposited Hydrogen on Platinum

Understanding the pH dependent shift of the oxidation peak of the underpotential deposited hydrogen (H upd ) in cyclic voltammograms on the Pt surface is of significance in terms of both the fundamentals of electrochemistry and the rational design of catalysts for the hydrogen oxidation/evolution reactions (HOR/HER). In this work, we provide compelling evidence that the pH dependent shift in the H upd peak on Pt surfaces is driven by the structure of interfacial water rather than the specific adsorption of cations on the electrode surface. Additionally, combined cyclic voltammetric and surface enhanced spectroscopic investigations using an organic cation and crown-ether chelated alkali metal cations show that specific adsorption of metal and organic cations on the Pt surface at the conditions relevant to the HOR/HER is unlikely. The vibrational band corresponding to strongly bound water is monitored when the electrode potential is varied in the H upd range in both acid and base.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantification of Active Sites and Elucidation of the Reaction Mechanism of the Electrochemical Nitrogen Reduction Reaction on Vanadium Nitride

Abstract Despite recent intense interest in the development of catalysts for the electrochemical nitrogen reduction reaction (ENRR), mechanistic understanding and catalyst design principles remain lacking. In this work, we develop a strategy to determine the density of initial and steady‐state active sites on ENRR catalysts that follow the Mars–van Krevelen mechanism via quantitative isotope‐exchange experiments. This method allows the comparison of intrinsic activities of active sites and facilitates the identification and improvement of active‐site structures for ENRR. Combined with detailed density functional theory calculations, we show that the rate‐limiting step in the ENRR is likely the initial N≡N bond activation via the addition of a proton and an electron to the adsorbed N 2 on the N vacancies to form N 2 H. The methodology developed and mechanistic insights gained in this work could guide the rational catalyst design in the ENRR.

Yang, Xuan↗

Preface - JES Focus Issue on Advances in Modern Polymer Electrolyte Fuel Cells in Honor of Shimshon Gottesfeld

The advances in polymer electrolyte fuel cell (PEFC) technologies over the past few decades and particularly over the past few years, have been very impressive. The promise of PEFC-based fuel cell electric vehicles (FCEVs) as long range EVs of zero emissions, high conversion efficiency, and fit for use of fuels from renewable sources, was recognized by pioneers of this technology some 40 years ago, facing at the time significant skepticism. The eventual commercial introduction of FCEVs in 2015 was enabled by the impressive accomplishments of scientists, engineers, and policymakers over that period of time. Among those responsible for the fuel cell community's success, few, if any, have had more impact than Dr. Shimshon Gottesfeld. He is a distinguished fuel cell educator, a passionate fuel cell and alternative fuel advocate, and a pioneering fuel cell innovator, responsible for several critical contributions that helped demonstrate the commercial viability of polymer electrolyte fuel cells. His impact on the field is seen through specific technical accomplishments, the scientists he has mentored, the teams he has led in different topical areas, and his activities as organizer and speaker in technical fuel cell meetings. We are honored to dedicate this focus issue of the Journal of The Electrochemical Society, entitled 'Advances in Modern Polymer Electrolyte Fuel Cells in Honor of Shimshon Gottesfeld,' to Dr. Gottesfeld for his accomplishments in the area of PEFC science and technology.

30 DIRECT ENERGY CONVERSION↗

High-Performance Hydroxide Exchange Membrane Fuel Cells through Optimization of Relative Humidity, Backpressure and Catalyst Selection

Hydroxide exchange membrane fuel cells (HEMFC) are an enticing power source for automobiles due to their low cost. Here we focus on improving the beginning-of-life performance of HEMFCs to a higher level with poly(aryl piperidinium) (PAP) membranes and ionomers. We reveal that lower RH and backpressure in anode than cathode can eliminate anode flooding and cathode dryout so that a balanced water management can be achieved. We also find that PtRu/C is a better anode catalyst than Pt/Ketjen Black due to the presence of Ru and Pt/Vulcan XC-72 is a better cathode catalyst than Pt/Ketjen Black due to its better mass transport properties. Once the preferred operating conditions and materials incorporated into the same cell, our HEMFCs achieved a peak power density of 1.89 W cm –2 in H 2 /O 2 and 1.31 W cm –2 in H 2 /air.

25 ENERGY STORAGE↗

Poly(aryl piperidinium) polymers for use as hydroxide exchange membranes and ionomers

Poly(aryl piperidinium) polymers are provided which have an alkaline-stable cation, piperidinium, introduced into a rigid aromatic polymer backbone free of ether bonds. Hydroxide exchange membranes or hydroxide exchange ionomers formed from these polymers exhibit superior chemical stability, hydroxide conductivity, decreased water uptake, good solubility in selected solvents, and improved mechanical properties in an ambient dry state as compared to conventional hydroxide exchange membranes or ionomers. Hydroxide exchange membrane fuel cells comprising the poly(aryl piperidinium) polymers exhibit enhanced performance and durability at relatively high temperatures.

Yan, Yushan↗