Engineering topics

Yan, Xi

Publications and source records attributed to Yan, Xi.

12 records

DOE OSTI2024

On the Topotactic Phase Transition Achieving Superconducting Infinite‐Layer Nickelates

Abstract Topotactic reduction is critical to a wealth of phase transitions of current interest, including synthesis of the superconducting nickelate Nd 0.8 Sr 0.2 NiO 2 , reduced from the initial Nd 0.8 Sr 0.2 NiO 3 /SrTiO 3 heterostructure. Due to the highly sensitive and often damaging nature of the topotactic reduction, however, only a handful of research groups have been able to reproduce the superconductivity results. A series of in situ synchrotron‐based investigations reveal that this is due to the necessary formation of an initial, ultrathin layer at the Nd 0.8 Sr 0.2 NiO 3 surface that helps to mediate the introduction of hydrogen into the film such that apical oxygens are first removed from the Nd 0.8 Sr 0.2 NiO 3 / SrTiO 3 (001) interface and delivered into the reducing environment. This allows the square‐planar / perovskite interface to stabilize and propagate from the bottom to the top of the film without the formation of interphase defects. Importantly, neither geometric rotations in the square planar structure nor significant incorporation of hydrogen within the films is detected, obviating its need for superconductivity. These findings unveil the structural basis underlying the transformation pathway and provide important guidance on achieving the superconducting phase in reduced nickelate systems.

36 MATERIALS SCIENCE↗

DOE OSTI2024

On the Emergence of Ferromagnetism in LaCoO 3 Ultrathin Films

It is well known that the properties of a crystal evolve as it increases in size from a single atomic plane to that of the bulk. Such size-dependent transitions can stem from many different origins and depend on minute changes to crystal bonding and composition. Here, a model example is that of LaCoO 3 , which is non-magnetic in the bulk but can display ferromagnetism at the nanoscale. Here, the evolution of structure-property relationships is studied in the LaCoO 3-δ /SrTiO 3 (001) system as the thickness of LaCoO 3-δ is increased from a single plane to 10 unit cells. In situ synchrotron X-ray studies are performed during and post-deposition to probe changes in the interactions between structure, stoichiometry, and magnetic behavior. Structural quantification indicates that the oxygen octahedral rotation pattern evolves with thickness, due to inherent differences in crystal symmetry between the film and substrate. The change in rotation modifies the required energy barrier for the spin state transition via the Co–O bond length and Co–O–Co bond angle, affecting the appearance of ferromagnetism. Our results highlight the contributions of high spin Co 2+ and/or high spin Co 3+ to respective weak and robust ferromagnetism and the evolution of properties with size in ultrathin LaCoO 3-δ heterostructures.

36 MATERIALS SCIENCE↗

DOE OSTI2022

In situ x-ray studies of growth of complex oxides on graphene by molecular beam epitaxy

Future technologies are likely to exploit flexible heterostructures exhibiting multifunctional properties constructed from multiple materials. One technique for the synthesis of such systems relies on remote epitaxy, a method employing graphene as a sacrificial layer between a crystalline substrate and an epitaxial film. The technique can be used to create single crystal heterostructures comprised of stacked epitaxial films, their properties optimized by minimizing incompatibilities between the different materials. Details regarding nucleation and growth via remote epitaxy remain unknown, however, due to the many difficulties in studying synthesis in the growth environment with atomic-scale resolution. Here, we describe an in situ synchrotron x-ray investigation of complex oxide thin film growth on graphene by molecular beam epitaxy. Phase retrieval methods were used to reconstruct the electron density profiles from x-ray crystal truncation rods measured under different growth conditions. Our in situ observations combined with post-growth spectroscopy provide a number of key insights regarding graphene in the synthesis environment and the resulting effects on the complex oxide/graphene heterostructure.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Enhancing the metal–insulator transition in VO 2 heterostructures with graphene interlayers

In this work, studies were conducted on epitaxial VO 2 thin films to assess to the effect of remote epitaxy on the metal–insulator transition (MIT). The epitaxial VO 2 heterostructures were synthesized on both bare Al 2 O 3 (0001) substrates and Al 2 O 3 substrates coated with two monolayer-thick graphene. While both systems exhibit the MIT, the film grown by remote epitaxy on graphene demonstrates improved transport properties. Electrical transport measurements show that the on/off ratio is enhanced by a factor of ~7.5 and the switching temperature window is narrower for VO 2 thin films grown on graphene. By characterizing the heterostructures with a suite of structural, chemical, and spectroscopic tools, we find that the graphene interlayer inhibits oxygen vacancy diffusion from Al 2 O 3 (0001) during the VO 2 growth, resulting in improved electrical behavior at the MIT.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Nanoscale Control of the Metal–Insulator Transition at LaAlO 3 /KTaO 3 Interfaces

Recent reports of superconductivity at KTaO 3 (KTO) (110) and (111) interfaces have sparked intense interest due to the relatively high critical temperature as well as other properties that distinguish this system from the more extensively studied SrTiO 3 (STO)-based heterostructures. Here, we report the reconfigurable creation of conducting structures at intrinsically insulating LaAlO 3 / KTO(110) and (111) interfaces. Devices are created using two distinct methods previously developed for STO-based heterostruc-tures: (1) conductive atomic-force microscopy lithography and (2) ultralow-voltage electron-beam lithography. At low temperatures, KTO(110)-based devices show superconductivity that is tunable by an applied back gate. A one-dimensional nanowire device shows single-electron-transistor (SET) behavior. A KTO(111)-based device is metallic but does not become superconducting. Finally, these reconfigurable methods of creating nanoscale devices in KTO-based heterostructures offer new avenues for investigating mechanisms of superconductivity as well as development of quantum devices that incorporate strong spin-orbit interactions, superconducting behavior, and nanoscale dimensions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Origin of the 2D Electron Gas at the SrTiO 3 Surface

Bulk SrTiO 3 is a well-known band insulator and the most common substrate used in the field of complex oxide heterostructures. Its surface and interface with other oxides, however, have demonstrated a variety of remarkable behaviors distinct from those expected. In this work, using a suite of in situ techniques to monitor both the atomic and electronic structures of the SrTiO 3 (001) surface prior to and during growth, the disappearance and re-appearance of a 2D electron gas (2DEG) is observed after the completion of each SrO and TiO 2 monolayer, respectively. The 2DEG is identified with the TiO 2 double layer present at the initial SrTiO 3 surface, which gives rise to a surface potential and mobile electrons due to vacancies within the TiO 2-x adlayer. Much like the electronic reconstruction discovered in other systems, two atomic planes are required, here supplied by the double layer. The combined in situ scattering/spectroscopy findings resolve a number of longstanding issues associated with complex oxide interfaces, facilitating the employment of atomic-scale defect engineering in oxide electronics.

2D electron gas↗

DOE OSTI2022

Self-healing Growth of LaNiO 3 on a Mixed-Terminated Perovskite Surface

Developing atomic-scale synthesis control is a prerequisite for understanding and engineering the exotic physics inherent to transition-metal oxide heterostructures. Thus, far, however, the number of materials systems explored has been extremely limited, particularly with regard to the crystalline substrate, which is routinely SrTiO 3 . Here, we investigate the growth of a rare-earth nickelate-LaNiO 3 -on (LaAlO 3 )(Sr 2 AlTaO 6 ) (LSAT) (001) by oxide molecular beam epitaxy (MBE). Whereas the LSAT substrates are smooth, they do not exhibit the single surface termination usually assumed necessary for control over the interface structure. Performing both nonresonant and resonant anomalous in situ synchrotron surface X-ray scattering during MBE growth, we show that reproducible heterostructures can be achieved regardless of both the mixed surface termination and the layer-by-layer deposition sequence. The rearrangement of the layers occurs dynamically during growth, resulting in the fabrication of high-quality LaNiO 3 /LSAT heterostructures with a sharp and consistent interfacial structure. This is due to the thermodynamics of the deposition window as well as the nature of the chemical species at interfaces-here, the flexible charge state of nickel at the oxide surface. This has important implications regarding the use of a wider variety of substrates for fundamental studies on complex oxide synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

In situ Study on the Evolution of Atomic and Electronic Structure of LaTiO 3 /SrTiO 3 System

As with other transition-metal oxide interfaces, LaTiO 3 /SrTiO 3 interfaces exhibit interesting electronic properties, such as a two-dimensional electron gas. While the available Mott states and multiple pathways to metallicity in LaTiO 3 can lead to a variety of applications in oxide electronics, the origin of the different properties remains uncertain. Herein, utilizing real-time, in situ x-ray diffraction at the synchrotron, robust but thin LaTiO 3 /SrTiO 3 heterostructures were fabricated using oxide molecular beam epitaxy. A thickness of six unit cells was determined to be critical, at which point the LaTiO 3 /SrTiO 3 heterostructures begin to sustain sharp, well-defined interfaces. The layers of LaTiO 3 and SrTiO 3 were sufficiently thin to benefit from the finite escape length of electrons at resonant soft x-ray photoemission, and the heterostructures were transferred in vacuo after growth to another chamber for synchrotron-based x-ray photoemission spectroscopy studies. With the x-ray energy tuned to the Ti-2p resonance, the LaTiO 3 /SrTiO 3 interfaces could be probed with enough penetration depth and selectivity. It is shown that all of the heterointerfaces exhibit the two-dimensional electron gas.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Synchrotron studies of functional interfaces and the state of the art: A perspective

The dramatic improvements in synchrotron light sources across the world imply tremendous opportunities for interface science. In this work, we describe a variety of current scattering and spectroscopic techniques with an eye toward how these will evolve, particularly with the advent of diffraction-limited sources. We also note the importance of in situ and operando methods for both understanding interface creation and interface evolution in different environments. As interfaces are often where critical processes occur, whether in regard to energy/chemical/materials/quantum information science, understanding the utility of these x-ray techniques will be of considerable importance to the cultivation of next-generation scientists.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Interface creation on a mixed-terminated perovskite surface

In the field of complex oxide heterostructures, understanding of the initial substrate surface can be critical to fundamental studies regarding the development of emergent properties at the film–substrate interface. For this reason, a considerable amount of effort has gone into the development of techniques to achieve surfaces with single termination for a variety of perovskite single crystals. However, a decisive understanding of how an interface is created when epitaxial growth occurs on a mixed terminated surface remains lacking. Employing in situ synchrotron X-ray scattering during thin film growth by molecular beam epitaxy, we investigate the initial stages of growth on (LaAlO 3 )(Sr 2 AlTaO 6 ) (001) substrates with mixed termination. Using LaNiO 3 as a model system, we find that the surface layers of the substrate restructure during deposition such that while a NiO 2 monolayer is weakly bound, a LaO monolayer bonds strongly, effectively incorporating with (Al, Ta)O 2 from the surface and forming a La(Al, Ta)O 3 ultrathin film.  With regard to the synthesis of high-quality complex oxide heterostructures, it is important that the substrate meet an array of criteria related to the crystal structure, lattice parameter, thermodynamic properties, electrical and optical properties, and so on. In particular, the surface of the substrate should be atomically smooth and exhibit the step-terrace structure ideal for epitaxial thin film growth. Perovskite oxides with the formula ABO 3 have two possible (001) surfaces: AO (A-site termination) and BO 2 (B-site termination). The ability to consistently achieve one of these surface terminations on SrTiO 3 , i.e., TiO 2 , has helped SrTiO 3 become the predominant oxide in the field.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Two-dimensional superconductivity and anisotropic transport at KTaO 3 (111) interfaces

The distinctive electronic structure found at interfaces between materials can allow unconventional quantum states to emerge. Here we report on the discovery of superconductivity in electron gases formed at interfaces between (111)-oriented KTaO 3 and insulating overlayers of either EuO or LaAlO 3 . The superconducting transition temperature, as high as 2.2 kelvin, is about one order of magnitude higher than that of the LaAlO 3 /SrTiO 3 system. Notably, similar electron gases at KTaO 3 (001) interfaces remain normal down to 25 millikelvin. The critical field and current-voltage measurements indicate that the superconductivity is two-dimensional. In EuO/KTaO 3 (111) samples, a spontaneous in-plane transport anisotropy is observed before the onset of superconductivity, suggesting the emergence of a distinct “stripe”-like phase, which is also revealed near the critical field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

In situ x-ray and electron scattering studies of oxide molecular beam epitaxial growth

We perform the first in situ synchrotron X-ray ray diffraction (SXRD) / reflection high energy electron diffraction (RHEED) studies on the growth of complex oxide thin films by molecular beam epitaxy. The unique deposition chamber, located at the Advanced Photon Source, allows the preparation of complex oxide samples with monolayer precision and facilitates the formation of direct correlations between in situ X-ray studies and the more prevalent RHEED investigations. Importantly, because SXRD and RHEED probe different atomic-scale processes during thin film synthesis, their concomitant use enables the extraction of details concerning growth behavior than one cannot determine from either probe alone. We describe the results of such in situ studies on the epitaxial growth of perovskite LaNiO3on (La 0.18 Sr 0.82 )(Al 0.59 Ta 0.41 )O 3 (001). We find that during the earliest stages of growth, the RHEED and X-ray signals do not agree with each other, demonstrating that while regular RHEED oscillations may imply high quality growth, the film-substrate interface can undergo significant changes during deposition due to the occurrence of interdiffusion at the growth temperature.

36 MATERIALS SCIENCE↗