Engineering Papers⌕ Search

Engineering topics

Yan, J.

Publications and source records attributed to Yan, J..

54 records · Page 3

Electron impact excitation rate coefficients for P-like Ni XIV

We have calculated the atomic data including electron impact excitations and radiative decays among the lowest 143 fine-structure levels arising from 3s{sup 2}3p{sup 3}, 3s3p{sup 4}, 3s{sup 2}3p{sup 2}3d, 3p{sup 5}, 3s3p{sup 3}3d, and 3s{sup 2}3p3d{sup 2} configurations in P-like Ni XIV. Direct excitation collision strengths are calculated employing the relativistic distorted-wave method. Resonances are included via the isolated resonance approximation using distorted-waves. Resonance contributions from S-like [3s{sup 2}3p{sup 3}, 3s3p{sup 4}, 3s{sup 2}3p{sup 2}3d,3p{sup 5}, 3s3p{sup 3}3d,3s{sup 2}3p3d{sup 2}, 3p{sup 4}3d,3s3p{sup 2}3d{sup 2},3s{sup 2}3d{sup 3}]n{sup Prime }l{sup Prime} complex series are taken into account. Effective collision strengths are reported over an electron temperature range of 1.0 Multiplication-Sign 10{sup 5}-1.0 Multiplication-Sign 10{sup 8} K. -- Highlights: Black-Right-Pointing-Pointer Radiative and collisional atomic data are presented for the lowest 143 fine-structure levels in P-like Ni XIV. Black-Right-Pointing-Pointer Calculations are performed using the FAC package. Black-Right-Pointing-Pointer Resonances enhance significantly a large amount of transitions. Black-Right-Pointing-Pointer Resonances play an important role of level population and line intensity ratios.

74 ATOMIC AND MOLECULAR PHYSICS↗

Coupled full core neutron transport/CFD simulations of pressurized water reactors

Recently as part of the CASL project, a capability to perform 3D whole-core coupled neutron transport and computational fluid dynamics (CFD) calculations was demonstrated. This work uses the 2D/1D transport code DeCART and the commercial CFD code STAR-CCM+. It builds on previous CASL work demonstrating coupling for smaller spatial domains. The coupling methodology is described along with the problem simulated and results are presented for fresh hot full power conditions. An additional comparison is made to an equivalent model that uses lower order T/H feedback to assess the importance and cost of high fidelity feedback to the neutronics problem. A simulation of a quarter core Combustion Engineering (CE) PWR core was performed with the coupled codes using a Fixed Point Gauss-Seidel iteration technique. The total approximate calculation requirements are nearly 10,000 CPU hours and 1 TB of memory. The problem took 6 coupled iterations to converge. The CFD coupled model and low order T/H feedback model compared well for global solution parameters, with a difference in the critical boron concentration and average outlet temperature of 14 ppm B and 0.94 deg. C, respectively. Differences in the power distribution were more significant with maximum relative differences in the core-wide pin peaking factor (Fq) of 5.37% and average relative differences in flat flux region power of 11.54%. Future work will focus on analyzing problems more relevant to CASL using models with less approximations. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

PWR internal flow modeling with fuel assemblies details

This study is an example of a massive parallel computing of the coolant flow in a nuclear reactor. It resolves the flow velocities in each assembly on pin level and predicts the flow distribution in complex geometries such as the lower and upper reactor plenums. The size of the developed model (1.035 billion cells) required the runs to be executed on the NCCS clusters (www.nccs.gov). STAR-CCM+ code (www.ed-adapco.com) was installed on two clusters: JAGUARXT5 and FROST, both of which were capable of executing this model. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Uranium mononitride as a potential commercial LWR fuel

This paper evaluated uranium mononitride (UN) as a potential replacement for 5% enriched UO{sub 2} fuel in Generation III and III+ commercial light water reactors (LWRs). Significant improvement in LWR performance depends on developing and implementing changes in the nuclear fuel used in these reactors. Compared to UO{sub 2}, UN offers several advantages such as higher uranium loading and better thermal conductivity. In this paper, the thermal safety margin of UN was evaluated at both normal and accident conditions using a readily available coupled CFD model developed for the US DOE CASL program. One of the prime technical challenges in utilization of UN as LWR fuel is the water compatibility because pure phase UN is not stable in water at 350 deg. C. The water corrosion resistance of UN and the corrosion mechanism were reviewed and mitigation methods were proposed. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

X-Ray and Optical Observations of A 0535+26

We present recent contemporaneous X-ray and optical observations of the Be/X-ray binary system A 0535+26 with the Fermi/Gamma-ray Burst Monitor (GBM) and several ground-based observatories. These new observations are put into the context of the rich historical data (since 1978) and discussed in terms of the neutron-star-Be-disk interaction. The Be circumstellar disk was exceptionally large just before the 2009 December giant outburst, which may explain the origin of the unusual recent X-ray activity of this source. We found a peculiar evolution of the pulse profile during this giant outburst, with the two main components evolving in opposite ways with energy. A hard 30-70 mHz X-ray quasi-periodic oscillation was detected with GBM during this 2009 December giant outburst. It becomes stronger with increasing energy and disappears at energies below 25 keV. In the long term a strong optical/X-ray correlation was found for this system, however in the medium term the Halpha equivalent width and the V-band brightness showed an anti-correlation after 2002 August. Each giant X-ray outburst occurred during a decline phase of the optical brightness, while the H showed a strong emission. In late 2010 and before the 2011 February outburst, rapid V/R variations are observed in the strength of the two peaks of the H line. These had a period of 25 days and we suggest the presence of a global one-armed oscillation to explain this scenario. A general pattern might be inferred, where the disk becomes weaker and shows V/R variability beginning 6 months following a giant outburst.

Camero-Arranz, A.↗

Thermal Hydraulic Validation Report

The test is a classical example of gas flow in a round pipe. It tests the ability of the code to compute the velocity profiles at different dominantly high Reynolds numbers Reynolds number K-E turbulence models are used and to that extent, the test evaluates the implementation of wall functions in the K-E models.

42 ENGINEERING↗

Application of Advanced Methods to Predict Grid to Rod Fretting in PWRs

Advanced modeling and simulation methods are being developed as part of the US Department of Energy sponsored Nuclear Energy Modeling and Simulation Hub called CASL (Consortium for Advanced Simulation of LWRs). The key participants of the CASL team include Oak Ridge National Laboratory (lead), Idaho National Laboratory, Sandia National Laboratories, Los Alamos National Laboratory, Massachusetts Institute of Technology, North Carolina State University, University of Michigan, Electric Power Research Institute, Tennessee Valley Authority and Westinghouse Electric Corporation. One of the key objectives of the CASL program is to develop multi-physics methods and tools which evaluate neutronic, thermal-hydraulic, structural mechanics and nuclear fuel rod performance in rod bundles to support power uprates, increased burnup/cycle length and life extension for US nuclear plants.

Karoutas, Zeses↗

2-Aminoethyl Methylphosphonate, a Potent and Rapidly Acting Antagonist of GABA A -ρ1 Receptors

All three classes of receptors for the inhibitory neurotransmitter GABA (GABAR) are expressed in the retina. This study investigated roles of GABAR, especially GABA(C)R (GABA(A)-rho), in retinal signaling in vivo by studying effects on the mouse electroretinogram (ERG) of genetic deletion of GABA(C)R versus pharmacological blockade using receptor antagonists. Brief full-field flash ERGs were recorded from anesthetized GABA(C)R(-/-) mice, and WT C57BL/6 (B6) mice, before and after intravitreal injection of GABA(C)R antagonists, TPMPA, 3-APMPA, or the more recently developed 2-AEMP; GABA(A)R antagonist, SR95531; GABA(B)R antagonist, CGP, and agonist, baclofen. Intravitreal injections of TPMPA and SR95531 were also made in Brown Norway rats. The effect of 2-AEMP on GABA-induced current was tested directly in isolated rat rod bipolar cells, and 2-AEMP was found to preferentially block GABA(C)R in those cells. Maximum amplitudes of dark (DA) and light-adapted (LA) ERG b-waves were reduced in GABA(C)R(-/-) mice, compared to B6 mice, by 30-60%; a-waves were unaltered and oscillatory potential amplitudes were increased. In B6 mice, after injection of TPMPA (also in rats), 3-APMPA or 2-AEMP, ERGs became similar to ERGs of GABA(C)R(-/-) mice. Blockade of GABA(A)Rs and GABA(B)Rs, or agonism of GABA(B)Rs did not alter B6 DA b-wave amplitude. The negative scotopic threshold response (nSTR) was slightly less sensitive in GABA(C)R(-/-) than in B6 mice, and unaltered by 2-AEMP. However, amplitudes of nSTR and photopic negative response (PhNR), both of which originate from inner retina, were enhanced by TPMPA and 3-APMPA, each of which has GABA(B) agonist properties, and further increased by baclofen. The finding that genetic deletion of GABA(C)R, the GABA(C)R antagonist 2-AEMP, and other antagonists all reduced ERG b-wave amplitude, supports a role for CABA(C)R in determining the maximum response amplitude of bipolar cells contributing to the b-wave. GABA(C)R antagonists differed in their effects on nSTR and PhNR; antagonists with GABA(B) agonist properties enhanced light-driven responses whereas 2-AEMP did not.

60 APPLIED LIFE SCIENCES↗

Low-Energy Electron Capture in Collisions of C3+ with He

Charge transfer processes due to collisions of ground-state C{sup 3+}(1s{sup 2}2s {sup 2}S) ions with He atoms are studied using the quantum-mechanical molecular-orbital close-coupling method for energies in the range 10{sup -4}-2 x 10{sup 3} eV/u. The ab initio adiabatic potentials and radial couplings utilized in the calculations are obtained from the multireference single- and double-excitation configuration interaction approach. Total and state-selective single-electron capture cross sections and rate coefficients are calculated and compared with the available experimental and theoretical data. A good agreement is found between the measured cross sections and the present calculations. However, the previous calculations of total rate coefficients using the Landau-Zener model are one to two orders of magnitude smaller than the present results.

74 ATOMIC AND MOLECULAR PHYSICS↗

The Automatic Parallelisation of Scientific Application Codes Using a Computer Aided Parallelisation Toolkit

The shared-memory programming model is a very effective way to achieve parallelism on shared memory parallel computers. Historically, the lack of a programming standard for using directives and the rather limited performance due to scalability have affected the take-up of this programming model approach. Significant progress has been made in hardware and software technologies, as a result the performance of parallel programs with compiler directives has also made improvements. The introduction of an industrial standard for shared-memory programming with directives, OpenMP, has also addressed the issue of portability. In this study, we have extended the computer aided parallelization toolkit (developed at the University of Greenwich), to automatically generate OpenMP based parallel programs with nominal user assistance. We outline the way in which loop types are categorized and how efficient OpenMP directives can be defined and placed using the in-depth interprocedural analysis that is carried out by the toolkit. We also discuss the application of the toolkit on the NAS Parallel Benchmarks and a number of real-world application codes. This work not only demonstrates the great potential of using the toolkit to quickly parallelize serial programs but also the good performance achievable on up to 300 processors for hybrid message passing and directive-based parallelizations.

Ierotheou, C.↗

Tools to Rapidly and Effectively Parallelise Serial FORTRAN Codes Using Either MPI or OpenMP

Significant progress has been made in hardware and software technologies, as a result the use of efficient standard message passing communication calls in parallel application codes has greatly assisted in reducing execution times. In addition, the introduction of OpenMP, an industrial standard for shared memory programming with directives addresses the issue of portability and also provides a means to deliver respectable performance. In general however, the manual parallelisation of a user's application code using either message passing or directives is still a very costly and error-prone process.

Jin, Hao-Qiang↗

Testing New Programming Paradigms with NAS Parallel Benchmarks

Over the past decade, high performance computing has evolved rapidly, not only in hardware architectures but also with increasing complexity of real applications. Technologies have been developing to aim at scaling up to thousands of processors on both distributed and shared memory systems. Development of parallel programs on these computers is always a challenging task. Today, writing parallel programs with message passing (e.g. MPI) is the most popular way of achieving scalability and high performance. However, writing message passing programs is difficult and error prone. Recent years new effort has been made in defining new parallel programming paradigms. The best examples are: HPF (based on data parallelism) and OpenMP (based on shared memory parallelism). Both provide simple and clear extensions to sequential programs, thus greatly simplify the tedious tasks encountered in writing message passing programs. HPF is independent of memory hierarchy, however, due to the immaturity of compiler technology its performance is still questionable. Although use of parallel compiler directives is not new, OpenMP offers a portable solution in the shared-memory domain. Another important development involves the tremendous progress in the internet and its associated technology. Although still in its infancy, Java promisses portability in a heterogeneous environment and offers possibility to "compile once and run anywhere." In light of testing these new technologies, we implemented new parallel versions of the NAS Parallel Benchmarks (NPBs) with HPF and OpenMP directives, and extended the work with Java and Java-threads. The purpose of this study is to examine the effectiveness of alternative programming paradigms. NPBs consist of five kernels and three simulated applications that mimic the computation and data movement of large scale computational fluid dynamics (CFD) applications. We started with the serial version included in NPB2.3. Optimization of memory and cache usage was applied to several benchmarks, noticeably BT and SP, resulting in better sequential performance. In order to overcome the lack of an HPF performance model and guide the development of the HPF codes, we employed an empirical performance model for several primitives found in the benchmarks. We encountered a few limitations of HPF, such as lack of supporting the "REDISTRIBUTION" directive and no easy way to handle irregular computation. The parallelization with OpenMP directives was done at the outer-most loop level to achieve the largest granularity. The performance of six HPF and OpenMP benchmarks is compared with their MPI counterparts for the Class-A problem size in the figure in next page. These results were obtained on an SGI Origin2000 (195MHz) with MIPSpro-f77 compiler 7.2.1 for OpenMP and MPI codes and PGI pghpf-2.4.3 compiler with MPI interface for HPF programs.

Jin, H.↗

Use Computer-Aided Tools to Parallelize Large CFD Applications

Porting applications to high performance parallel computers is always a challenging task. It is time consuming and costly. With rapid progressing in hardware architectures and increasing complexity of real applications in recent years, the problem becomes even more sever. Today, scalability and high performance are mostly involving handwritten parallel programs using message-passing libraries (e.g. MPI). However, this process is very difficult and often error-prone. The recent reemergence of shared memory parallel (SMP) architectures, such as the cache coherent Non-Uniform Memory Access (ccNUMA) architecture used in the SGI Origin 2000, show good prospects for scaling beyond hundreds of processors. Programming on an SMP is simplified by working in a globally accessible address space. The user can supply compiler directives, such as OpenMP, to parallelize the code. As an industry standard for portable implementation of parallel programs for SMPs, OpenMP is a set of compiler directives and callable runtime library routines that extend Fortran, C and C++ to express shared memory parallelism. It promises an incremental path for parallel conversion of existing software, as well as scalability and performance for a complete rewrite or an entirely new development. Perhaps the main disadvantage of programming with directives is that inserted directives may not necessarily enhance performance. In the worst cases, it can create erroneous results. While vendors have provided tools to perform error-checking and profiling, automation in directive insertion is very limited and often failed on large programs, primarily due to the lack of a thorough enough data dependence analysis. To overcome the deficiency, we have developed a toolkit, CAPO, to automatically insert OpenMP directives in Fortran programs and apply certain degrees of optimization. CAPO is aimed at taking advantage of detailed inter-procedural dependence analysis provided by CAPTools, developed by the University of Greenwich, to reduce potential errors made by users. Earlier tests on NAS Benchmarks and ARC3D have demonstrated good success of this tool. In this study, we have applied CAPO to parallelize three large applications in the area of computational fluid dynamics (CFD): OVERFLOW, TLNS3D and INS3D. These codes are widely used for solving Navier-Stokes equations with complicated boundary conditions and turbulence model in multiple zones. Each one comprises of from 50K to 1,00k lines of FORTRAN77. As an example, CAPO took 77 hours to complete the data dependence analysis of OVERFLOW on a workstation (SGI, 175MHz, R10K processor). A fair amount of effort was spent on correcting false dependencies due to lack of necessary knowledge during the analysis. Even so, CAPO provides an easy way for user to interact with the parallelization process. The OpenMP version was generated within a day after the analysis was completed. Due to sequential algorithms involved, code sections in TLNS3D and INS3D need to be restructured by hand to produce more efficient parallel codes. An included figure shows preliminary test results of the generated OVERFLOW with several test cases in single zone. The MPI data points for the small test case were taken from a handcoded MPI version. As we can see, CAPO's version has achieved 18 fold speed up on 32 nodes of the SGI O2K. For the small test case, it outperformed the MPI version. These results are very encouraging, but further work is needed. For example, although CAPO attempts to place directives on the outer- most parallel loops in an interprocedural framework, it does not insert directives based on the best manual strategy. In particular, it lacks the support of parallelization at the multi-zone level. Future work will emphasize on the development of methodology to work in a multi-zone level and with a hybrid approach. Development of tools to perform more complicated code transformation is also needed.

Jin, H.↗

MPI, HPF or OpenMP: A Study with the NAS Benchmarks

Porting applications to new high performance parallel and distributed platforms is a challenging task. Writing parallel code by hand is time consuming and costly, but this task can be simplified by high level languages and would even better be automated by parallelizing tools and compilers. The definition of HPF (High Performance Fortran, based on data parallel model) and OpenMP (based on shared memory parallel model) standards has offered great opportunity in this respect. Both provide simple and clear interfaces to language like FORTRAN and simplify many tedious tasks encountered in writing message passing programs. In our study, we implemented the parallel versions of the NAS Benchmarks with HPF and OpenMP directives. Comparison of their performance with the MPI implementation and pros and cons of different approaches will be discussed along with experience of using computer-aided tools to help parallelize these benchmarks. Based on the study, potentials of applying some of the techniques to realistic aerospace applications will be presented.

Jin, H.↗