Engineering Papers⌕ Search

Engineering topics

Yan, H

Publications and source records attributed to Yan, H.

44 records · Page 3

A Theoretical Study of the Two-Dimensional Point Focusing by Two Multilayer Laue Lenses.

Hard x-ray point focusing by two crossed multilayer Laue lenses is studied using a full-wave modeling approach. This study shows that for a small numerical aperture, the two consecutive diffraction processes can be decoupled into two independent ones in respective directions. Using this theoretical tool, we investigated adverse effects of various misalignments on the 2D focus profile and discussed the tolerance to them. We also derived simple expressions that described the required alignment accuracy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wedged multilayer Laue lens

A multilayer Laue lens (MLL) is an x-ray focusing optic fabricated from a multilayer structure consisting of thousands of layers of two different materials produced by thin-film deposition. The sequence of layer thicknesses is controlled to satisfy the Fresnel zone plate law and the multilayer is sectioned to form the optic. An improved MLL geometry can be created by growing each layer with an in-plane thickness gradient to form a wedge, so that every interface makes the correct angle with the incident beam for symmetric Bragg diffraction. The ultimate hard x-ray focusing performance of a wedged MLL has been predicted to be significantly better than that of a nonwedged MLL, giving subnanometer resolution with high efficiency. Here, we describe a method to deposit the multilayer structure needed for an ideal wedged MLL and report our initial deposition results to produce these structures.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Comparative study on the growth of silver nanoplates on GaAs substrates by electron microscopy, synchrotron x-ray diffraction and optical spectroscopy.

We have recently developed a simple and efficient approach involving the galvanic reaction between a pure aqueous solution of AgNO{sub 3} and GaAs wafers to directly grow high-quality Ag nanoplates with chemical clean surfaces on the GaAs wafers [Chem. Mater. 2007, 19, 5845; Small 2007, 3, 1964]. The capability to finely control the dimensions (i.e., size and thickness) of the Ag nanoplates and the time-dependent characterizations have not been explored yet. In this article, time-dependent evolutions of the Ag nanostructures grown on highly doped n-type GaAs wafers through the reactions with AgNO{sub 3} solutions, which have concentrations varying in the range of 1-10 M, for different times have been systematically investigated by employing various powerful techniques including electron microscopy, synchrotron X-ray diffraction, and optical microscopy. The results indicate that the sizes of Ag nanoplates can be tuned in the range from tens of nanometers to half a micrometer and their thicknesses can be varied from -20 to -160 nm by simultaneously controlling the concentration of AgNO{sub 3} solution and the growth time. The as-grown Ag nanoplates exhibit tunable strong extinction peaks in the ultraviolet-visible-near-infrared spectral regimes, where the GaAs substrates intensively interact with the light.

43 PARTICLE ACCELERATORS↗

Fabrication, characterization, and the rectifying properties of the interfacial structural controlled LaSrMnO-Si heterojunctions

The La{sub 0.9}Sr{sub 0.1}MnO{sub 3}/Si p-n junctions with optimized rectifying properties were synthesized using radio frequency magnetron sputtering followed by an in situ annealing process at a series of temperatures. The thickness of the SiO{sub x} barrier layer d determines the rectifying properties of the heterojunctions by Id{sup 3}=constant (I is the rectifying current). The dead layer was determined to act as a semiconductor layer in the conduction process. The annealed samples show Mn{sup 4+} rich interface which correlated closely to the electrical transportation properties of the heterostructures. Lowering the annealing temperature, the electric sensitivity of the heterojunction can be significantly enhanced by simply tuning the thickness of the barrier layer.

36 MATERIALS SCIENCE↗

Bonded multilayer Laue Lens for focusing hard x-rays.

We have fabricated partial Multilayer Laue Lens (MLL) linear zone plate structures with thousands of alternating WSi{sub 2} and Si layers and various outermost zone widths according to the Fresnel zone plate formula. Using partial MLL structures, we were able to focus hard X-rays to line foci with a width of 30 nm and below. Here, we describe challenges and approaches used to bond these multilayers to achieve line and point focusing. Bonding was done by coating two multilayers with AuSn and heating in a vacuum oven at 280-300 C. X-ray reflectivity measurements confirmed that there was no change in the multilayers after heating to 350 C. A bonded MLL was polished to a 5-25 {micro}m wedge without cracking. SEM image analyses found well-positioned multilayers after bonding. These results demonstrate the feasibility of a bonded full MLL for focusing hard X-rays.

36 MATERIALS SCIENCE↗