Engineering topics

Xu, Xin

Publications and source records attributed to Xu, Xin.

5 records

DOE OSTI2024

A reversible four-electron Sn metal aqueous battery

Sn is a promising metal anode for aqueous batteries, with up to four-electron redox available per atom (903 mAh g −1 Sn ). However, practically harnessing the four-electron Sn(OH) 6 2− /Sn reversibility remains challenging due to limited mechanistic understanding. Here, in this study, we reveal a kinetically asymmetric redox pathway involving a successive four-electron plating and a stepwise 2 + 2 electron stripping through a Sn(OH) 3 − intermediate. The crossover of Sn(OH) 3 − induces a reversible self-discharge that reduces Coulombic efficiency but does not impact cyclability, demonstrated by four-electron Sn-Ni full cells that sustain >800 h of stable cycling. By tuning the ion selectivity of the separator to suppress Sn(OH) 3 − crossover while allowing OH − transport, we further demonstrate high Sn utilization (67%) and high energy density (143.1 Wh L −1 cell). The results provide key understandings of the tradeoffs in engineering reversible multi-electron metal anodes and define a new benchmark for practical energy density that exceeds any Sn-based aqueous batteries to date.

SN anode↗

DOE OSTI2024

J-TEXT achievements in turbulence and transport in support of future device/reactor

Following the reconstruction of the TEXT tokamak at Huazhong University of Science and Technology in China, renamed as J-TEXT, a plethora of experimental and theoretical investigations has been conducted to elucidate the intricacies of turbulent transport within the tokamak configuration. These endeavors encompass not only the J-TEXT device's experimental advancements but also delve into critical issues pertinent to the optimization of future fusion devices and reactors. Here, the research includes topics on the suppression of turbulence, flow drive and damping, density limit, non-local transport, intrinsic toroidal flow, turbulence and flow with magnetic islands, turbulent transport in the stochastic layer, and turbulence and zonal flow with energetic particles or helium ash. Several important achievements have been made in the last few years, which will be further elaborated upon in this comprehensive review.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Overview of the recent experimental research on the J-TEXT tokamak

The J-TEXT capability is enhanced compared to two years ago with several upgrades of its diagnostics and the increase of electron cyclotron resonance heating (ECRH) power to 1 MW. With the application of electron cyclotron wave (ECW), the ECW assisted plasma startup is achieved; the tearing mode is suppressed; the toroidal injection of 300 kW ECW drives around 24 kA current; fast electrons are generated with toroidal injected ECW and the runaway current conversion efficiency increases with ECRH power. The mode coupling between 2/1 and 3/1 modes are extensively studied. The coupled 2/1 and 3/1 modes usually lead to major disruption. Their coupling can be either suppressed or avoided by external resonant magnetic perturbation fields and hence avoids the major disruption. It is also found that the 2/1 threshold of external field is significantly reduced by a pre-excited 3/1 mode, which can be either a locked island or an external kink mode. The disruption control is studied by developing prediction methods capable of cross tokamak application and by new mitigation methods, such as the biased electrode or electromagnetic pellet injector. The high-density operation and related disruptions are studied from various aspects. Approaching the density limit, the collapse of the edge shear layer is observed and such collapse can be prevented by applying edge biasing, leading to an increased density limit. The density limit is also observed to increase, if the plasma is operated in the poloidal divertor configuration or the plasma purity is increased by increasing the pre-filled gas pressure or ECRH power during the start-up phase.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Effect of H + Exchange and Surface Impurities on Bulk and Interfacial Electrochemistry of Garnet Solid Electrolytes

Contact loss and current constriction pose significant challenges at the Li metal interface of solid-state batteries. For garnet-structured Li 7 La 3 Zr 2 O 12 (LLZO), these effects are amplified by Li + /H + exchange and surface contamination reactions, which lead to conductivity losses and poor Li wetting. In this study, we utilize a variety of surface treatment processes across 37 cells to selectively induce proton exchange and contamination reactions in LLZO. The resulting bulk and surface chemistry is systematically characterized and correlated to changes in electrochemical properties. Additionally, we combine impedance analysis and finite element method modeling to deconvolute sources of impedance contributions at the Li metal interface. Specifically, we show that constriction impedance at the Li metal interface arises not solely from voids, but also from ionically-resistive surface contaminants. Further, these findings emphasize the connection between ionic conductivity and constriction, demonstrating that micron-scale ionically-resistive components increase constriction even with identical contact geometries. Finally, we leverage our comprehensive dataset to highlight unstable overpotential growth as a failure mechanism, additionally showing that the phase of a cell’s impedance is a sensitive indicator for the onset of interfacial instability. Overall, this study clarifies the impacts of proton exchange and surface contamination on electrochemical properties at the Li|solid electrolyte interface and elucidates insights that are generalizable to other solid-state battery systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

On how structures convey non-diffusive turbulence spreading

Abstract We report on comprehensive experimental studies of turbulence spreading in edge plasmas. These studies demonstrate the relation of turbulence spreading and entrainment to intermittent convective density fluctuation events or bursts (i.e. blobs and holes). The non-diffusive character of turbulence spreading is thus elucidated. The turbulence spreading velocity (or mean jet velocity) manifests a linear correlation with the skewness of density fluctuations, and increases with the auto-correlation time of density fluctuations. Turbulence spreading by positive density fluctuations is outward, while spreading by negative density fluctuations is inward. The degree of symmetry breaking between outward propagating blobs and inward propagating holes increases with the amplitude of density fluctuations. Thus, blob-hole asymmetry emerges as crucial to turbulence spreading. These results highlight the important role of intermittent convective events in conveying the spreading of turbulence, and constitute a fundamental challenge to existing diffusive models of spreading.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗