Engineering topics
Xu, Peng
Publications and source records attributed to Xu, Peng.
UO 2 + 5 vol% ZrB 2 nano composite nuclear fuels with full boron retention and enhanced oxidation resistance
The boron isotope ( 10 B) can be used as a neutron absorber in UO 2 to control the reactivity of nuclear fuel pellets, however, the boron source can react with oxygen source in UO 2 to form B 2 O 3 that vaporize readily at temperatures above 1200 °C. Unfortunately, the sintering of UO 2 fuel requires hours holding at high temperature (>1700 °C), resulting in an inevitable B loss during sintering and unpredictable B concentration in final product. It is challenging to incorporate boron through a conventional sintering method. In this work, we demonstrated that spark plasma sintering (SPS), a field assisted sintering technology, can effectively densify UO 2 + 5 vol% ZrB 2 composite fuel pellets by rapid consolidation at 1600 °C for a short duration of 5 min under an applied pressure of 40 MPa. Further, thermogravimetric analysis (TGA) measurements confirm that ZrB 2 is fully retained inside the composite fuel pellets. Inside the composite fuel pellets, nano sized ZrB 2 particles are uniformly distributed along the grain boundaries of the UO 2 matrix. The ZrB 2 particle transforms to a glassy B 2 O 3 phase covering the sample surface and grain boundaries of UO 2 matrix after a simple post-sintering annealing at 1000 °C in flowing Argon gas for 4 h. The formed glassy B 2 O 3 slows down the diffusion of oxygen ions and postpones the onset temperature for oxidation of UO 2 from 400 °C to 550 °C. This study demonstrates the capability of SPS, an advanced fuel manufacturing technique, to achieve a full retention of ZrB 2 in UO 2 oxide fuel and increase oxidation resistance through a simple post-sintering annealing. The reported work holds great engineering potential for development of advanced oxide fuel for nuclear application.
Compensatory Guaiacyl Lignin Biosynthesis at the Expense of Syringyl Lignin in 4CL1 -Knockout Poplar -Knockout Poplar
The lignin biosynthetic pathway is highly conserved in angiosperms, yet pathway manipulations give rise to a variety of taxon-specific outcomes. Knockout of lignin-associated 4-coumarate:CoA ligases (4CLs) in herbaceous species mainly reduces guaiacyl (G) lignin and enhances cell wall saccharification. In this work we show that CRISPR-knockout of 4CL1 in poplar (Populus tremula x alba) preferentially reduced syringyl (S) lignin, with negligible effects on biomass recalcitrance. Concordant with reduced S-lignin was downregulation of ferulate 5-hydroxylases (F5Hs). Lignification was largely sustained by 4CL5, a low-affinity paralog of 4CL1 typically with only minor xylem expression or activity. Levels of caffeate, the preferred substrate of 4CL5, increased in line with significant upregulation of caffeoyl shikimate esterase1. Upregulation of caffeoyl-CoA O-methyltransferase1 and downregulation of F5Hs are consistent with preferential funneling of 4CL5 products toward G-lignin biosynthesis at the expense of S-lignin. Thus, transcriptional and metabolic adaptations to 4CL1-knockout appear to have enabled 4CL5 catalysis at a level sufficient to sustain lignification. Finally, genes involved in sulfur assimilation, the glutathione-ascorbate cycle, and various antioxidant systems were upregulated in the mutants, suggesting cascading responses to perturbed thioesterification in lignin biosynthesis.
Recent Developments in the General Atomic and Molecular Electronic Structure System
A discussion of many of the recently implemented features of GAMESS (General Atomic and Molecular Electronic Structure System) and LibCChem (the C++ CPU/GPU library associated with GAMESS) is presented. These features include fragmentation methods like the fragment molecular orbital, effective fragment potential and effective fragment molecular orbital methods, hybrid MPI/OpenMP approaches to Hartree-Fock and resolution of the identity second order perturbation theory. Many new coupled cluster theory methods have been implemented in GAMESS, as have multiple levels of density functional/tight binding theory. The role of accelerators, especially graphical processing units, is discussed in the context of the new features of LibCChem, as is the associated problem of power consumption as the power of computers increases dramatically. The process by which a complex program suite like GAMESS is maintained and developed is considered. Future developments are briefly summarized.
Cold spray chromium coating for nuclear fuel rods
A method is provided for coating the substrate of a component, such as a zirconium alloy cladding tube, for use in a water cooled nuclear reactor under normal operating conditions and under high temperature oxidation conditions. The method includes heating a pressurized carrier gas to a temperature between 200° C. and 1200° C., adding chromium or chromium-based alloy particles having an average diameter of 20 microns or less to the heated carrier gas, and spraying the carrier gas and particles onto the substrate at a velocity, preferably from 800 to 4000 ft./sec. (about 243.84 to 1219.20 meters/sec.), to form a chromium and/or chromium-based alloy coating on the substrate to a desired thickness.
Disentangling spin-orbit coupling and local magnetism in a quasi-two-dimensional electron system
Quantum interference between time-reversed electron paths in two dimensions (2D) leads to the well-known weak localization correction to resistance. If spin-orbit coupling is present, the resistance correction is negative, termed weak antilocalization (WAL). Here, we report the observation of WAL coexisting with exchange coupling between itinerant electrons and localized magnetic moments. We use low-temperature magnetotransport measurements to investigate the quasi-two-dimensional, high-electron-density interface formed between SrTiO 3 and the antiferromagnetic Mott insulator NdTiO 3 . As the magnetic field angle is gradually tilted away from the sample normal, the data reveal the interplay between strong k-cubic Rashba-type spin-orbit coupling and a substantial magnetic exchange interaction from local magnetic regions. The resulting quantum corrections to the conduction are in excellent agreement with existing models and allow sensitive determination of the small magnetic moments (22 μ B on average), their magnetic anisotropy, and mutual coupling strength. Furthermore, this effect is expected to arise in other 2D magnetic materials systems.
Hopping transport in SrTiO 3 /Nd 1–x TiO 3 /SrTiO 3 heterostructures
Electronic transport near the insulator-metal transition is investigated in the molecular beam epitaxy-grown SrTiO 3 /Nd 1–x TiO 3 /SrTiO 3 heterostructures using temperature dependent magnetotransport measurements. It was found that Nd vacancies introduce localized electronic states resulting in variable range hopping transport at low temperatures. At a fixed Nd-vacancy concentration, a crossover from Mott to Efros-Shklovskii variable range hopping transport was observed with decreasing temperature. With increasing disorder, a sign reversal of magnetoresistance from positive to negative was observed revealing interplay between intra-state interaction and the energy dependence of the localization length. Furthermore, these findings highlight the important role of stoichiometry when exploring intrinsic effects using heterostructure and interfaces in addition to offering broad opportunities to tailor low temperature transport using nonstoichiometry defects.
Development of cold spray chromium coatings for improved accident tolerant zirconium-alloy cladding
Not provided.
Overview of General Atomics SiGA™ SiC-SiC Composite Development for Accident Tolerant Fuel
Explore the source record for details and available documents.
De Broglie relations, gravitational time dilation and weak equivalence principle
Interplays between quantum physics and gravity have long inspired exciting studies, which reveal subtle connections between quantum laws and the general notion of curved spacetime. One important example is the uniqueness of free-falling motions in both quantum and gravitational physics. In this work, we re-investigate the free-falling motions of quantum test wave packets that are distributed over weakly curved spacetime backgrounds. Except for the de Broglie relations, no assumption of priori given Hamiltonians or least actions satisfied by the quantum system is made. We find that the mean motions of quantum test wave packets can be deduced naturally from the de Broglie relations with a generalized treatment of gravitational time dilations in quantum waves. Such mean motions of quantum test masses in gravitational field are independent of their masses and compositions, and restore exactly the free-falling or geodesic motions of classical test masses in curved spacetime. This suggests a novel perspective that weak equivalence principle, which states the universality of free-fall, may be deeply rooted in quantum physics and be a phenomenon that has emerged from the quantum world.
Using Surface Engineering to Modulate Superconducting Coplanar Microwave Resonator Performance ${{\tau}}$
Superconducting microwave resonators are important components of superconducting quantum information and astronomy detector systems. Here in this paper, we show how to modify the microwave resonator performance after fabrication through surface engineering. In particular, we focus on titanium nitride (TiN)/silicon (Si) resonators because they have shown potential for achieving high-quality factors (Qis). Depending on the type of surface treatment, chemicalor plasma-based, we found Qis that vary by approximately a factor of 18. We used inductively coupled plasma (ICP) combined with reactive ion etching (RIE) for the plasma surface treatment. We found that the microwave resonator performance depends on the type of plasma environment, such as single gas (oxygen) or gas mixtures [argon/hydrogen (Ar/H 2 ), argon/octafluorocyclobutane (Ar/C 4 F 8 ), and argon/sulfur hexafluoride (Ar/SF 6 )], and the plasma processing conditions, such as treatment time, ICP power, and RIE power. Of the plasma surface treatments, the Ar/SF 6 environments with no or low ICP power showed the highest potential to improve Qi. The processing conditions determined the chemistry and roughness of the Si and TiN surfaces, TiN film thickness, and the overall TiN/Si resonator structure (edge and sidewall). Our results can be used as a guideline for optimizing the microwave resonator performance using surface treatments.
Compatibility Of U 3 Si 2 Fuel With Zr, FeCrAl and SiC/SiC Based Cladding
U 3 Si 2 fuel with FeCrAl or SiC/SiC composite cladding is being considered as an advanced concept and accident tolerant fuel (ATF) system for light water reactors. Understanding their chemical compatibility under operational and accident conditions is fundamental to predicting behavior and fuel qualification. In the present work, experimental determination of interactions and thermodynamic and first principle calculation methods were employed to assess U 3 Si 2 compatibility with novel cladding of FeCrAl-alloys and SiC composites, and were contrasted with compatibility with Zircaloy-4. Diffusion-couple experiments were performed to simulate fuelcladding conditions and the samples were subjected to characterization by scanning electron microscopy and x-ray diffraction. Thermodynamic calculations, based in part on newly determined thermodynamic properties, were used to predict the equilibrium state of the studied systems and to interpret experimental results. First principles calculations using density functional theory were employed to obtain incorporation energies for carbon, iron and uranium in U 3 Si 2 , α- Fe, and SiC structures. Together, the experimental and modeling results have allowed evaluation of the nature of interactions in the fuel-cladding systems.
Uranium nitride-silicide advanced nuclear fuel: higher efficiency and greater safety
Not Available
Molecular detection and genotyping of Toxoplasma gondii in free-ranging pigs in Northeastern China
Not Available
Uranium Silicide and Uranium Silicide-Nitride Fuels: Assessing Phase Behavior for Fabrication and In-Reactor Behavior
Explore the source record for details and available documents.