Engineering Papers⌕ Search

Engineering topics

Xu, Jun

Publications and source records attributed to Xu, Jun.

At least 127 records · Page 7

Droplet Nucleation: Physically-Based Parameterization and Comparative Evaluation

One of the greatest sources of uncertainty in simulations of climate and climate change is the influence of aerosols on the optical properties of clouds. The root of this influence is the droplet nucleation process. Droplet nucleation involves the simultaneous condensational growth of an aerosol population until maximum supersaturation is achieved and a subset of the particles are large enough to grow spontaneously into cloud droplets. Numerical models of droplet nucleation are capable of representing much of the complexity of the process, but at a computational cost that limits their application to simulations of hours or days. Parameterizations of droplet nucleation are designed to quickly estimate the number nucleated as a function of the primary controlling parameters: the cooling rate and the size distribution of aerosol number and hygroscopicity. Here we compare and contrast the key assumptions used in developing each of the most popular parameterizations and compare the performance of each under a variety of conditions. In general we find that the more complex parameterizations perform well under a wider variety of conditions, but all parameterizations perform well under the most common conditions. We then discuss the various applications of the parameterizations to cloud-resolving, regional and global models to study aerosol effects on clouds at a wide range of spatial and temporal scales. We conclude with a summary of the outstanding challenges remaining for further development.

54 ENVIRONMENTAL SCIENCES↗

Determining the structure of tetragonal Y{sub 2}WO{sub 6} and the site occupation of Eu{sup 3+} dopant

The compound Y{sub 2}WO{sub 6} is prepared by solid state reaction at 750 {sup o}C using sodium chloride as mineralizer. Its structure is solved by ab-initio methods from X-ray powder diffraction data. This low temperature phase of yttrium tungstate crystallizes in tetragonal space group P4/nmm (No. 129), Z=2, a=5.2596(2) A, c=8.4158(4) A. The tungsten atoms in the structure adopt an unusual [WO{sub 6}] distorted cubes coordination, connecting [YO{sub 6}] distorted cubes with oxygen vacancies at the O{sub 2} layers while other yttrium ions Y{sub 2} form [YO{sub 8}] cube coordination. Y{sup 3+} ions occupy two crystallographic sites of 2c (C{sub 4v} symmetry) and 2a (D{sub 2d} symmetry) in the Y{sub 2}WO{sub 6} host lattice. With Eu{sup 3+} ions doped, the high resolution emission spectrum of Y{sub 2}WO{sub 6}:Eu{sup 3+} suggests that Eu{sup 3+} partly substituted for Y{sup 3+} in these two sites. The result of the Rietveld structure refinement shows that the Eu{sup 3+} dopants preferentially enter the 2a site. The uniform cube coordination environment of Eu{sup 3+} ions with the identical eight Eu-O bond lengths is proposed to be responsible for the intense excitation of long wavelength ultraviolet at 466-535 nm. -- Graphical abstract: The excitation and emission spectra of Y{sub 2}WO{sub 6}:Eu{sup 3+} indicates the effect of long wavelength-excited property, which is ascribed to the cube coordination environment of Eu{sup 3+} ions with the uniform Eu-O bond length. Display Omitted Research highlights: Y{sub 2}WO{sub 6} is prepared using sodium chloride as mineralizer. The structure of the compound Y{sub 2}WO{sub 6} is solved by ab-initio methods. The site occupation of Eu{sup 3+} is determined. The cube coordination of Eu{sup 3+} ions is responsible for the long wavelength excitation.

36 MATERIALS SCIENCE↗

Pb-Pb collisions at {radical}(s{sub NN})=2.76 TeV in a multiphase transport model

The multiplicity and elliptic flow of charged particles produced in Pb-Pb collisions at center of mass energy {radical}(s{sub NN})=2.76 TeV from the Large Hadron Collider are studied in a multiphase transport (AMPT) model. With the standard parameters in the HIJING model, which is used as initial conditions for subsequent partonic and hadronic scatterings in the AMPT model, the resulting multiplicity of final charged particles at mid-pseudorapidity is consistent with the experimental data measured by the ALICE Collaboration. This value is, however, increased by about 25% if the final-state partonic and hadronic scatterings are turned off. Because of final-state scatterings, particularly those among partons, the final elliptic flow of charged hadrons is also consistent with the ALICE data if a smaller but more isotropic parton scattering cross section than previously used in the AMPT model for describing the charged hadron elliptic flow in heavy ion collisions at the Relativistic Heavy Ion Collider is used. The resulting transverse momentum spectra of charged particles as well as the centrality dependence of their multiplicity density and the elliptic flow are also in reasonable agreement with the ALICE data. Furthermore, the multiplicities, transverse momentum spectra, and elliptic flows of identified hadrons such as protons, kaons, and pions are predicted.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Effects of triangular flow on di-hadron azimuthal correlations in relativistic heavy ion collisions

Using the AMPT model for relativistic heavy ion collisions, we have studied the di-hadron azimuthal angular correlations triggered by emitted jets in Au+Au collisions at center-of-mass energy {radical}(s{sub NN})=200 GeV and impact parameter b=8 fm. A double-peak structure for the associated particles at the away side of trigger particles is obtained after subtracting background correlations due to the elliptic flow. Both the near-side peak and the away-side double peaks in the azimuthal angular correlations are, however, significantly suppressed (enhanced) in events of small (large) triangular flow or triangularity in the initial collision geometry as a result of fluctuations. After subtraction of background correlations due to the triangular flow, the away-side double peaks change into a single peak with broad shoulders on both sides. The away side of the di-hadron correlations becomes essentially a single peak after further subtraction of higher-order flows.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nanocone Tip-Film Solar Cells with Efficient Charge Transport

Nanojunctions promise to provide higher charge transport efficiencies and less costly solar cell fabrication methods. We report a three-dimensional (3D) solar cell structure based on interdigitated nanojunctions formed with the tips of n-type ZnO nanocones embedded in a p-type polycrystalline (PX) CdTe film. This 3D nanocone tip-film cell, without optimization, enabled 3.2% power conversion efficiency, higher than that produced by a planar solar cell fabricated using the same materials. Reducing CdTe grain size and enriching the grain boundaries with chlorine improved the conversion efficiency for the tip-film structure. This higher conversion efficiency is attributable to improved charge transport in the nanojunction due to a combination of the high electric field generated in the CdTe and the utilization of the small junction area. The high field facilitates the extraction of minority carriers from the photoactive layer to the small junction region, while the use of the small junction area reduces the total electron recombination loss. The improved carrier transport in the nanocone tip-film junction implies that nanocone-based photovoltaic solar cells are capable of tolerating the imperfect materials produced using low-cost fabrication methods.

14 SOLAR ENERGY↗

THERMAL ANNEALING OF ZNO FILMS USING HIGH-DENSITY PLASMA ARC LAMPS

Nanostructured materials are rarely synthesized with appropriate phase and/or morphology. In this study, critical additional of as-synthesized nanostructured materials, such as annealing and/or activation of dopants, are addressed using infrared plasma arc lamps (PAL) over areas as large as 1,000 cm2. The broad spectral range of the PAL and the spectral variation of light absorption in nanostructured materials make the selection of processing parameters extremely difficult, posing a major technological barrier. In this study, the measurement of the surface temperature using various techniques for ZnO films on crystalline silicon wafers is discussed. An energy transport model for the simulation of rapid thermal processing using PAL is presented. The experimental and computational results show that the surface temperature cannot be measured directly and that computer simulation results are an effective tool for obtaining accurate data on processing temperatures.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Light Confinement-Induced Antireflection of ZnO Nanocones

The antireflective features of aperiodic vertical aligned ZnO nanocones on Si wafer were studied both experimentally and theoretically through comparison with planar ZnO films on Si substrates and bare Si substrates. The measured diffuse reflectance spectra show that the nanocone-based texture reduces the light reflection in a broad spectral range, and is much more effective than the planar textures. The numerical simulations exhibit a good agreement with the experimental data and suggest that the light confinement inside nanocones by controlling the diameters can bring further improvement of light absorption into Si.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Room temperature ferromagnetism in pristine MgO thin films

Robust ferromagnetic ordering at, and well above room temperature is observed in pure transparent MgO thin films (<170 nm thick) deposited by three different techniques. Careful study of the wide scan x-ray photoelectron spectroscopy rule out the possible presence of any magnetic contaminants. In the magnetron sputtered films, we observe magnetic phase transitions as a function of film thickness. The maximum saturation magnetization of 5.7 emu/cm{sup 3} is measured on a 170 nm thick film. The films above 500 nm are found to be diamagnetic. Ab initio calculations suggest that the ferromagnetism is mediated by cation vacancies.

36 MATERIALS SCIENCE↗

Transport Modeling of Membrane Extraction of Chlorinated Hydrocarbon from Water for Ion Mobility Spectrometry

Membrane-extraction Ion Mobility Spectrometry (ME-IMS) is a feasible technique for the continuous monitoring of chlorinated hydrocarbons in water. This work studies theoretically the time-dependent characteristics of sampling and detection of trichloroethylene (TCE). The sampling is configured so that aqueous contaminants permeate through a hollow polydimethylsiloxane (PDMS) membrane and are carried away by a transport gas flowing through the membrane tube into IMS analyzer. The theoretical study is based on a two-dimensional transient fluid flow and mass transport model. The model describes the TCE mixing in the water, permeation through the membrane layer, and convective diffusion in the air flow inside membrane tube. The effect of various transport gas flow rates on temporal profiles of IMS signal intensity is investigated. The results show that fast time response and high transport yield can be achieved for ME-IMS by controlling the flow rate in the extraction membrane tube. These modeled time-response profiles are important for determining duty cycles of field-deployable sensors for monitoring chlorinated hydrocarbons in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Membrane-Extraction Ion Mobility Spectrometry for In-Situ Detection of Chlorinated Hydrocarbons in Water

Membrane-extraction ion mobility spectrometry (ME-IMS) has been developed for in-situ sampling and analysis of trace chlorinated hydrocarbons in water in a single procedure. The sampling is configured so that aqueous contaminants permeate through a spiral hollow polydimethylsiloxane (PDMS) membrane and are carried away by a vapor flow through the membrane tube. The extracted analyte flows into an atmospheric pressure chemical ionization (APCI) chamber and is analyzed in a home-made IMS analyzer. PDMS membrane is found to effectively extract chlorinated hydrocarbon solvents from liquid phase to vapor. The specialized IMS analyzer has been found to have resolutions of R=33 and 41, respectively, for negative- and positive-modes and is capable of detecting aqueous tetrachloroethylene (PCE) and trichloroethylene (TCE) as low as 80 g/L and 74 g/L in negative ion mode, respectively. The time-dependent characteristics of sampling and detection of TCE are both experimentally and theoretically studied for various concentrations, membrane lengths, and flow rates. These characteristics demonstrate that membrane-extraction IMS is feasible for the continuous monitoring of chlorinated hydrocarbons in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

ZnO-ZnTe Nanocone Heterojunctions

Semiconductor nanostructure heterojunctions are expected to be efficient structures for next-generation photovoltaic solar cells, radiation detectors, and light-emitting diodes. In this letter we report heterojunctions made of vertically aligned ZnO/ZnTe nanocones synthesized using a combination of thermal vapor deposition and pulsed-laser deposition (PLD). The ZnO nanocones and nanorods were synthesized as cores by utilizing the growth rate difference between central and boundary sites of precursor domains during thermal vapor deposition. The p-n heterojunctions were subsequently formed by growing ZnTe as shells on the nanocone surface using PLD. The ZnTe shells were polycrystalline structures, while ZnO cores were wurzite structures. The p-n junction of the nanocone core-shell structure exhibited I-V characteristics consistent with a p-n diode, but the nanorod junction did not. These structural and electric characteristics indicate that the ZnO nanocones are more feasible than ZnO nanorods as heterojunctions because the sloping facets of the nanocones facilitate deposition of ZnTe by PLD without the deleterious effects of shadowing. Furthermore, based on theoretical modeling of nanostructure heterojunctions, the nanocone-based junction exhibits an electrostatic potential profile that is much more effective for carrier transport than the electrostatic potential for the nanorod-based junction.

14 SOLAR ENERGY↗

Study of Charge Transport Mechanisms in ZnO-ZnTe Nanojunctions

Improved carrier transport is crucial for enhancing the performance of semiconductor devices such as radiation detectors. Conventionally, semiconductor devices employ planar p-n junctions in which carrier loss occurs mostly in the p-type and n-type diffusion regions. In a nanoscale three-dimensional (3-D) junction, the carriers can be efficiently collected cross the nanostructure by electric field distribution without trapping in the p-n regions. In addition, a nanocone junction should further improve carrier transport properties because this structure can be tailored to be completely depleted. In this work, we studied carrier transport mechanisms in nanojunctions made of vertically aligned ZnO nanostructures and ZnTe matrix using theoretical and experimental methods.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Intense Slow Positron Beam Facility at the NC State University PULSTAR Reactor

An intense slow positron beam is in its early stages of operation at the 1-MW open-pool PULSTAR research reactor at North Carolina State University. The positron beam line is installed in a beam port that has a 30-cmx30-cm cross sectional view of the core. The positrons are created in a tungsten converter/moderator by pair-production using gamma rays produced in the reactor core and by neutron capture reactions in cadmium cladding surrounding the tungsten. Upon moderation, slow ({approx}3 eV) positrons that are emitted from the moderator are electrostatically extracted, focused and magnetically guided until they exit the reactor biological shield with 1-keV energy, approximately 3-cm beam diameter and an intensity exceeding 6x10{sup 8} positrons per second. A magnetic beam switch and transport system has been installed and tested that directs the beam into one of two spectrometers. The spectrometers are designed to implement state-of-the-art PALS and DBS techniques to perform positron and positronium annihilation studies of nanophases in matter.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Aligned ZnO Nanorod Arrays Grown Directly on Zinc Foils and Zinc Spheres by a Low-Temperature Oxidation Method.

Vertically aligned, dense ZnO nanorod arrays were grown directly on zinc foils by a catalyst-free, low-temperature (450-500 C) oxidization method. The zinc foils remain conductive even after the growth of ZnO nanorods on its surface. The success of this synthesis largely relies on the level of control over oxygen introduction. By replacing zinc foils with zinc microspheres, unique and sophisticated urchin-like ZnO nanorod assemblies can be readily obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanocluster-associated vacancies in nanocluster-strengthened ferritic steel as seen via positron-lifetime spectroscopy

Nanocluster-strengthened ferritic alloys are promising as structural materials because of their excellent high-temperature strength and radiation-damage resistance. Recently, Fu et al. [Phys. Rev. Lett. 99, 225502 (2007)] predicted that vacancies play an essential role in the formation and stabilization of nanoclusters in these materials. Positron-lifetime spectroscopy has been used to test this theoretical prediction in a nanocluster-strengthened Fe-based alloy. Nanoclusters (2-4 nm in diameter) containing Ti, Y, and O have been observed in a mechanically alloyed ferritic steel by atom-probe tomography. Vacancy clusters containing four to six vacancies have also been found in this material. In contrast, no vacancy clusters were detected in similar alloys containing no nanoclusters. These results indicate that vacancies are a vital component of the nanoclusters in these alloys.

36 MATERIALS SCIENCE↗