Engineering Papers⌕ Search

Engineering topics

Xu, Jun

Publications and source records attributed to Xu, Jun.

At least 91 records · Page 5

A Microporous Amic Acid Polymer for Enhanced Ammonia Capture

Amic acids, consisting of carboxylic acids and amides, are often utilized as intermediates that can further undergo a dehydration–cyclization step to yield polymeric cyclic imides. Compared with imide-based materials, the presence of Brønsted acidic groups and multiple hydrogen-bond donors and acceptors in materials incorporating amic acids opens up the possibility for a variety of host–guest interactions. Here in this paper we report a facile and catalyst-free synthesis of a Brønsted acidic porous poly(amic acid) (PAA) and present its NH 3 uptake properties using gas adsorption and breakthrough measurements. Simple addition of water as a cosolvent to a mixture of tetrakis(4-aminophenyl)methane and pyromellitic anhydride resulted in the formation of PAA in almost quantitative yield. Further mechanistic studies with model compounds revealed the importance of additive water to generate amic acid species selectively without forming cyclic imides at high temperatures. Gas adsorption isotherms and breakthrough curves obtained under dry and humid conditions demonstrate the enhanced NH 3 uptake in the case of PAA compared with the related polycyclic imide at both low and high pressures. Furthermore, the results of adsorption/desorption cycling experiments provide insights into the strength of the interaction between ammonia and the polymers.

36 MATERIALS SCIENCE↗

Loss of Inositol Phosphorylceramide Sphingolipid Mannosylation Induces Plant Immune Responses and Reduces Cellulose Content in Arabidopsis

Glycosylinositol phosphorylceramides (GIPCs) are a class of glycosylated sphingolipids found in plants, fungi, and protozoa. These lipids are abundant in the plant plasma membrane, forming ~25% of total plasma membrane lipids. Little is known about the function of the glycosylated headgroup, but two recent studies have indicated that they play a key role in plant signaling and defense. Here, we show that a member of glycosyltransferase family 64, previously named ECTOPICALLY PARTING CELLS1, is likely a Golgi-localized GIPC-specific mannosyl-transferase, which we renamed GIPC MANNOSYL-TRANSFERASE1 (GMT1). Sphingolipid analysis revealed that the Arabidopsis thaliana gmt1 mutant almost completely lacks mannose-carrying GIPCs. Heterologous expression of GMT1 in Saccharomyces cerevisiae and tobacco (Nicotiana tabacum) cv Bright Yellow 2 resulted in the production of non-native mannosylated GIPCs. gmt1 displays a severe dwarfed phenotype and a constitutive hypersensitive response characterized by elevated salicylic acid and hydrogen peroxide levels, similar to that we previously reported for the Golgi-localized, GIPC-specific, GDP-Man transporter GONST1 (Mortimer et al., 2013). Unexpectedly, we show that gmt1 cell walls have a reduction in cellulose content, although other matrix polysaccharides are unchanged.

59 BASIC BIOLOGICAL SCIENCES↗

Wireless power transmission for battery charging

A wireless power transmission system is provided for high power applications. The power transmission system is comprised generally of a charging unit configured to generate an alternating electromagnetic field and a receive unit configured to receive the alternating electromagnetic field from the charging unit. The charging unit includes a power source; an input rectifier; an inverter; and a transmit coil. The transmit coil has a spirangle arrangement segmented into n coil segments with capacitors interconnecting adjacent coil segments. The receive unit includes a receive coil and an output rectifier. The receive coil also has a spirangle arrangement segmented into m coil segments with capacitors interconnecting adjacent coil segments.

24 POWER TRANSMISSION AND DISTRIBUTION↗

High resolution projection micro stereolithography system and method

A high-resolution P.mu.SL system and method incorporating one or more of the following features with a standard P.mu.SL system using a SLM projected digital image to form components in a stereolithographic bath: a far-field superlens for producing sub-diffraction-limited features, multiple spatial light modulators (SLM) to generate spatially-controlled three-dimensional interference holograms with nanoscale features, and the integration of microfluidic components into the resin bath of a P.mu.SL system to fabricate microstructures of different materials.

36 MATERIALS SCIENCE↗

A Molecular Surface Functionalization Approach to Tuning Nanoparticle Electrocatalysts for Carbon Dioxide Reduction

Conversion of the greenhouse gas carbon dioxide (CO 2 ) to value-added products is an important challenge for sustainable energy research, and nanomaterials offer a broad class of heterogeneous catalysts for such transformations. Here we report a molecular surface functionalization approach to tuning gold nanoparticle (Au NP) electrocatalysts for reduction of CO 2 to CO. The N -heterocyclic (NHC) carbene-functionalized Au NP catalyst exhibits improved faradaic efficiency (FE = 83%) for reduction of CO 2 to CO in water at neutral pH at an overpotential of 0.46 V with a 7.6-fold increase in current density compared to that of the parent Au NP (FE = 53%). Tafel plots of the NHC carbene-functionalized Au NP (72 mV/decade) vs parent Au NP (138 mV/decade) systems further show that the molecular ligand influences mechanistic pathways for CO 2 reduction. The results establish molecular surface functionalization as a complementary approach to size, shape, composition, and defect control for nanoparticle catalyst design.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single-crystal-like GdNdO{sub x} thin films on silicon substrates by magnetron sputtering and high-temperature annealing for crystal seed layer application

Single-crystal-like rare earth oxide thin films on silicon (Si) substrates were fabricated by magnetron sputtering and high-temperature annealing processes. A 30-nm-thick high-quality GdNdO{sub x} (GNO) film was deposited using a high-temperature sputtering process at 500°C. A Gd{sub 2}O{sub 3} and Nd{sub 2}O{sub 3} mixture was used as the sputtering target, in which the proportions of Gd{sub 2}O{sub 3} and Nd{sub 2}O{sub 3} were controlled to make the GNO’s lattice parameter match that of the Si substrate. To further improve the quality of the GNO film, a post-deposition annealing process was performed at a temperature of 1000°C. The GNO films exhibited a strong preferred orientation on the Si substrate. In addition, an Al/GNO/Si capacitor was fabricated to evaluate the dielectric constant and leakage current of the GNO films. It was determined that the single-crystal-like GNO films on the Si substrates have potential for use as an insulator layer for semiconductor-on-insulator and semiconductor/insulator multilayer applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dynamics of high quantum efficiency photoluminescence from N-Si-O bonding states in oxygenated amorphous silicon nitride films

We have reported high internal quantum efficiency (IQE) (∼60%) of photoluminescence (PL) at 470 nm wavelength from oxygenated amorphous silicon nitride (a-SiN{sub x}:O) films. In this work, we explored the dynamics of high PL IQE from luminescent N-Si-O bonding states in a-SiN{sub x}:O films by using a combination of time resolved PL (TRPL) and temperature dependent PL (TDPL) measurements. The TRPL measurements include time integrated PL, microsecond range PL, and nanosecond range PL measurement modes. The a-SiN{sub x}:O films exhibit ns PL decay dynamics that is independent of pumping fluence (W{sub PF}) and uniform across the PL spectrum, which is different from the PL decay behavior in a-SiN{sub x} films. Particularly, we precisely monitored the temporal evolution of the PL spectra profile to verify that the luminescent N-Si-O bonding states are responsible for the observed blue PL with a radiative recombination rate of ∼10{sup 8} s{sup −1}. Such very fast radiative recombination rate can be compared with that in direct band gap CdSe nanocrystals and can also help us to understand the high PL IQE in a-SiN{sub x}:O films. Moreover, by combining the TD-PL lifetimes with the PL IQE values, the temperature dependence of radiative and nonradiative lifetime can be determined.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High temperature Raman investigation of few-layer MoTe{sub 2}

We present a Raman investigation of the temperature effect of single and few layer MoTe{sub 2} at an electronic device working temperature range from 300 K to 500 K. We observe linear frequency red-shifts with increasing temperature for the first order Raman active E{sup 1}{sub 2g}, A{sub 1g}, Raman inactive B{sup 1}{sub 2g} mode, and the second order ω{sub 2} mode, which can be attributed to the anharmonic effect of the interatomic potential energy. The temperature coefficients of the out-of-plane vibrational B{sup 1}{sub 2g} modes and inplane vibrational E{sup 1}{sub 2g} modes are similarly around −0.013 cm{sup −1}/K, while lower than that of out-of-plane vibration A{sub 1g} mode at −0.009 cm{sup −1}/K. The temperature coefficient of ω{sub 2} mode is −0.00521 cm{sup −1}/K, approximately half of those of the first order modes, and the temperature coefficient of transverse acoustic TA (M) mode is indirectly deduced as −0.0102 cm{sup −1}/K, which shows the corresponding Mo-Te stretching bonds of TA (M) mode behavior similarly to those of optical Raman vibrations. Our work thus provides temperature dependent lattice vibration information of MoTe{sub 2} and could be potentially useful in future optoelectronic devices based on MoTe{sub 2} related two dimensional materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of uniaxial strain on electron effective mass and tunneling capability of direct gap Ge{sub 1−x}Sn{sub x} alloys

Direct gap Ge{sub 1−x}Sn{sub x} alloys under [100] and [110] uniaxial strain are comprehensively investigated by theoretical calculations using the nonlocal empirical pseudopotential method (EPM). It is shown that [100] uniaxial tensile strain aids indirect-to-direct gap transition in Ge{sub 1−x}Sn{sub x} alloys. The Γ electron effective mass along the optimal direction under [110] uniaxial strain is smaller than those under [100] uniaxial strain and (001) biaxial strain. Additionally, the direct tunneling gap is smallest along the strain-perpendicular direction under [110] uniaxial tensile strain, resulting in a maximum direct band-to-band tunneling generation rate. An optimal [110] uniaxial tensile strain is favorable for high-performance direct gap Ge{sub 1−x}Sn{sub x} electronic devices.

36 MATERIALS SCIENCE↗

Bi-Sn alloy catalyst for simultaneous morphology and doping control of silicon nanowires in radial junction solar cells

Low-melting point metals such as bismuth (Bi) and tin (Sn) are ideal choices for mediating a low temperature growth of silicon nanowires (SiNWs) for radial junction thin film solar cells. The incorporation of Bi catalyst atoms leads to sufficient n-type doping in the SiNWs core that exempts the use of hazardous dopant gases, while an easy morphology control with pure Bi catalyst has never been demonstrated so far. We here propose a Bi-Sn alloy catalyst strategy to achieve both a beneficial catalyst-doping and an ideal SiNW morphology control. In addition to a potential of further growth temperature reduction, we show that the alloy catalyst can remain quite stable during a vapor-liquid-solid growth, while providing still sufficient n-type catalyst-doping to the SiNWs. Radial junction solar cells constructed over the alloy-catalyzed SiNWs have demonstrated a strongly enhanced photocurrent generation, thanks to optimized nanowire morphology, and largely improved performance compared to the reference samples based on the pure Bi or Sn-catalyzed SiNWs.

14 SOLAR ENERGY↗

Rejuvenation of MPTP-induced human neural precursor cell senescence by activating autophagy

Aging of neural stem cell, which can affect brain homeostasis, may be caused by many cellular mechanisms. Autophagy dysfunction was found in aged and neurodegenerative brains. However, little is known about the relationship between autophagy and human neural stem cell (hNSC) aging. The present study used 1-methyl-4-phenyl-1, 2, 3, 6-tetrahydropyridine (MPTP) to treat neural precursor cells (NPCs) derived from human embryonic stem cell (hESC) line H9 and investigate related molecular mechanisms involved in this process. MPTP-treated NPCs were found to undergo premature senescence [determined by increased senescence-associated-β-galactosidase (SA-β-gal) activity, elevated intracellular reactive oxygen species level, and decreased proliferation] and were associated with impaired autophagy. Additionally, the cellular senescence phenotypes were manifested at the molecular level by a significant increase in p21 and p53 expression, a decrease in SOD2 expression, and a decrease in expression of some key autophagy-related genes such as Atg5, Atg7, Atg12, and Beclin 1. Furthermore, we found that the senescence-like phenotype of MPTP-treated hNPCs was rejuvenated through treatment with a well-known autophagy enhancer rapamycin, which was blocked by suppression of essential autophagy gene Beclin 1. Taken together, these findings reveal the critical role of autophagy in the process of hNSC aging, and this process can be reversed by activating autophagy. - Highlights: • We successfully establish hESC-derived neural precursor cells. • MPTP treatment induced senescence-like state in hESC-derived NPCs. • MPTP treatment induced impaired autophagy of hESC-derived NPCs. • MPTP-induced hESC-derived NPC senescence was rejuvenated by activating autophagy.

60 APPLIED LIFE SCIENCES↗

The role of N-Si-O bonding configurations in tunable photoluminescence of oxygenated amorphous silicon nitride films

Last year, we have reported that the internal quantum efficiency of photoluminescence (PL) from amorphous silicon oxynitride (a-SiN{sub x}O{sub y}) films has been achieved as high as 60%. The present work intensively investigated the mechanisms for tunable PL in the 2.05–2.95 eV range from our a-SiN{sub x}:O films, by using a combination of optical characterizations, X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance (EPR) measurements. The results of XPS, EPR, and photoluminescence excited measurements indicated that the incorporation of oxygen atoms into silicon nitride (a-SiN{sub x}) networks not only reduced the band tail structure disorder (Urbach tail width E{sub U}) but also created N-Si-O (N{sub x}) defect states in the band gap. We have discovered the distinctive PL characteristics from a-SiN{sub x}:O films with various NH{sub 3/}SiH{sub 4} ratios. The PL peak energy (E{sub PL}) is independent of the excitation energy (E{sub exc}) and the PL intensity (I{sub PL}) is regardless of the optical band gap (E{sub opt}) but is proportional to the N{sub x} defects concentration, both of which are completely different from the PL characteristics by band tail states recombination mechanism, in which the E{sub PL} is proportional to E{sub exc} (when E{sub exc} ≤ E{sub opt}) and the I{sub PL} is dependent on the relative position of E{sub exc} and E{sub opt}. Based on the N-Si-O bonding configurations and the distinctive PL characteristics, the radiative recombination mechanism through the N-Si-O defect states has been proposed, by which the performance of stimulated emission may be realized in this kind of a-SiN{sub x}:O films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗