Engineering Papers⌕ Search

Engineering topics

Xu, Hui

Publications and source records attributed to Xu, Hui.

At least 91 records · Page 5

3-D Modeling off the CFR Engine for the Investigation of Knock on Natural Gas

Engine knock and misfire are barriers to pathways leading to high-efficiency Natural Gas (NG) engines. The general tendency to knock is highly dependent on engine operating conditions and the fuel reactivity. The problem is further complicated by low emissions limits and the wide range of chemical reactivity in pipeline quality NG (65< MN<95). In order to realize diesel-like efficiencies, spark-ignited NG engines must be designed to operate at high BMEP near knock limits over a wide range of fuel reactivity. This requires a deep understanding regarding combustion-engine interactions important in flame propagation and end-gas autoignition. The present work highlights a three-dimensional computational fluid dynamics (CFD) model of the Cooperative Fuel Research (CFR) engine to investigate knock behavior with NG. The CFR engine model is used to investigate fuel-engine interactions that lead to knock with NG, including effects of fuel reactivity, engine operating parameters, and exhaust gas recirculation (EGR). Cylinder wall, piston, valves, and port surface temperatures are estimated with a 1-D Three-Pressure Analysis (TPA) model. Model validation was performed by comparing model predictions with experimental data taken with a CFR engine over varying compression ratio, CA50, EGR fraction and BMEP.

Bestel, Diego↗

Summary of Expansions and Updates in GREET® 2019

The GREET® (Greenhouse gases, Regulated Emissions, and Energy use in Transportation) model has been developed by Argonne National Laboratory (Argonne) with the support of the U.S. Department of Energy (DOE). GREET is a life-cycle analysis (LCA) tool, structured to systematically examine the energy and environmental effects of a wide variety of transportation fuels and vehicle technologies in major transportation sectors (i.e., road, air, marine, and rail). Argonne has expanded and updated the model in various sectors in GREET 2019, and this report provides a summary of the release.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Polycentric urban development and urban thermal environment: A case of Hangzhou, China

Polycentric urban structure has become popular worldwide, including in China. Previous studies revealed that polycentricity can remediate certain environmental problems; however, few studies have focused on how polycentricity affects the urban thermal environment. Using remote sensing data for the nighttime light and surface temperature, this study first explored the dynamics of polycentric urban development and thermal environment in Hangzhou during 2000-2010. Then their relationship was investigated in both morphological and functional dimensions. It was observed that from 2000 to 2006, Hangzhou experienced rapid polycentric development, especially in the functional dimension; however, this trend slowed down during 2006-2010. With the expansion of hot and medium-hot landscapes, the area with higher surface temperature enlarged notably, and warming trends were more significant in the suburbs than in the urban core. Polycentric urban development in both morphological and functional dimensions was positively correlated with the deterioration of the thermal environment. The regional differences in the urban thermal environment can be attributed to the distinctive functional orientations and development patterns of (sub)centers. Further, industrial sub-urbanization could be the underlying reason for the positive correlation because of its consistent distributions with the newly-expanded hot landscape and more contiguous hot landscape caused by the single land use pattern in industrial areas. Two policy implications about polycentric planning and landscape composition and configuration in industrial areas were proposed to mitigate the effect of urban heat island. The findings in this study are conductive to cities whose polycentric urban development is also industrial-based.

Yue, Wenze↗

A global meta‐analysis of soil organic carbon response to corn stover removal

Corn (Zea mays L.) stover is a global resource used for livestock, fuel, and bioenergy feedstock, but excessive stover removal can decrease soil organic C (SOC) stocks and deteriorate soil health. Many site-specific stover removal experiments report accrual rates and SOC stock effects, but a quantitative, global synthesis is needed to provide a scientific base for long-term energy policy decisions. We used 409 data points from 74 stover harvest experiments conducted around the world for a metaanalysis and meta-regression to quantify removal rate, tillage, soil texture, and soil sampling depth effects on SOC. Changes were quantified by: (a) comparing final SOC stock differences after at least 3 years with and without stover removal and (b) calculating SOC accrual rates for both treatments. Stover removal generally reduced final SOC stocks by 8% in the upper 0-15 or 0-30 cm, compared to stover retained, irrespective of soil properties and tillage practices. A more sensitive meta-regression analysis showed that retention increased SOC stocks within the 30-150 cm depth by another 5%. Compared to baseline values, stover retention increased average SOC stocks temporally at a rate of 0.41 Mg C ha -1 year -1 (statistically significant at $p$ < 0.01 when averaged across all soil layers). Although SOC sequestration rates were lower with stover removal, with moderate (< 50%) removal they can be positive, thus emphasizing the importance of site-specific management. Our results also showed that tillage effects on SOC stocks were inconsistent due to the high variability in practices used among the experimental sites. Finally, we conclude that research and technological efforts should continue to be given high priority because of the importance in providing science-based policy recommendations for long-term global carbon management.

54 ENVIRONMENTAL SCIENCES↗

Preface - JES Focus Issue on Advances in Modern Polymer Electrolyte Fuel Cells in Honor of Shimshon Gottesfeld

The advances in polymer electrolyte fuel cell (PEFC) technologies over the past few decades and particularly over the past few years, have been very impressive. The promise of PEFC-based fuel cell electric vehicles (FCEVs) as long range EVs of zero emissions, high conversion efficiency, and fit for use of fuels from renewable sources, was recognized by pioneers of this technology some 40 years ago, facing at the time significant skepticism. The eventual commercial introduction of FCEVs in 2015 was enabled by the impressive accomplishments of scientists, engineers, and policymakers over that period of time. Among those responsible for the fuel cell community's success, few, if any, have had more impact than Dr. Shimshon Gottesfeld. He is a distinguished fuel cell educator, a passionate fuel cell and alternative fuel advocate, and a pioneering fuel cell innovator, responsible for several critical contributions that helped demonstrate the commercial viability of polymer electrolyte fuel cells. His impact on the field is seen through specific technical accomplishments, the scientists he has mentored, the teams he has led in different topical areas, and his activities as organizer and speaker in technical fuel cell meetings. We are honored to dedicate this focus issue of the Journal of The Electrochemical Society, entitled 'Advances in Modern Polymer Electrolyte Fuel Cells in Honor of Shimshon Gottesfeld,' to Dr. Gottesfeld for his accomplishments in the area of PEFC science and technology.

30 DIRECT ENERGY CONVERSION↗

A Roadmap to Low-Cost Hydrogen with Hydroxide Exchange Membrane Electrolyzers

Hydrogen is an ideal alternative energy carrier to generate power for all of society's energy demands including grid, industrial, and transportation sectors. Among the hydrogen production methods, water electrolysis is a promising method because of its zero greenhouse gas emission and its compatibility with all types of electricity sources. Alkaline electrolyzers (AELs) and proton exchange membrane electrolyzers (PEMELs) are currently used to produce hydrogen. AELs are commercially mature and are used in a variety of industrial applications, while PEMELs are still being developed and find limited application. In comparison with AELs, PEMELs have more compact structure and can achieve higher current densities. Recently, however, an alternative technology to PEMELs, hydroxide exchange membrane electrolyzers (HEMELs), has gained considerable attention due to the possibility to use platinum group metal (PGM)-free electrocatalysts and cheaper membranes, ionomers, and construction materials and its potential to achieve performance parity with PEMELs. Here, the state-of-the-art AELs and PEMELs along with the current status of HEMELs are discussed in terms of their positive and negative aspects. Additionally discussed are electrocatalyst, membrane, and ionomer development needs for HEMELs and benchmark electrocatalysts in terms of the cost-performance tradeoff.

08 HYDROGEN↗

3-D Modeling of the CFR Engine for the Investigation of Knock on Natural Gas

Abstract: Engine knock and misfire are barriers to pathways leading to higher efficiency natural gas (NG) engines, where the general tendency to knock is highly dependent on engine operating conditions and the fuel reactivity. The problem is further complicated by low emissions limits and the wide range of chemical reactivity in pipeline quality NG, making the understanding of fuel- engine interactions essential to achieving high efficiencies in spark-ignited NG engines. The present work highlights a three-dimensional computational fluid dynamics (CFD) model of the Cooperative Fuel Research (CFR) engine to investigate knock behavior when running on NG. Using a Converge CFD model of the CFR engine fuel-engine interactions that lead to knock with NG, including effects of fuel reactivity, engine operating parameters, and exhaust gas recirculation, are being investigated. A GT-Power model is used to estimate appropriate initial conditions in the Converge CFD model, including cylinder wall, piston, valves, and port surface temperatures as well as residual gas fraction. In order to validate the model, in-cylinder pressure data taken with a CFR engine is compared to model predictions while varying compression ratio, CA50, and BMEP.

CFR Engine, Converge CFD, knock, Natural Gas↗

3-D Modeling of the CFR Engine for the Investigation of Knock on Natural Gas

Engine knock and misfire are barriers to pathways leading to higher efficiency natural gas (NG) engines, where the general tendency to knock is highly dependent on engine operating conditions and the fuel reactivity. The problem is further complicated by low emissions limits and the wide range of chemical reactivity in pipeline quality NG, making the understanding of fuel-engine interactions essential to achieving high efficiencies in spark-ignited NG engines. The present work highlights a three-dimensional computational fluid dynamics (CFD) model of the Cooperative Fuel Research (CFR) engine to investigate knock behavior when running on NG. Using a Converge CFD model of the CFR engine fuel-engine interactions that lead to knock with NG, including effects of fuel reactivity, engine operating parameters, and exhaust gas recirculation, are being investigated. A GT-Power model is used to estimate appropriate initial conditions in the Converge CFD model, including cylinder wall, piston, valves, and port surface temperatures as well as residual gas fraction. In order to validate the model, in-cylinder pressure data taken with a CFR engine is compared to model predictions while varying compression ratio, CA50, and BMEP.

Bestel, Diego↗

A county‐level estimation of renewable surface water and groundwater availability associated with potential large‐scale bioenergy feedstock production scenarios in the United States

Abstract This study examines fresh renewable water resources available for bioenergy feedstock production in the United States. The impacts of feedstock irrigation on surface and groundwater resources available to nonbioenergy sectors were quantified using a pair of water availability indexes: streamflow availability index and percolation flow availability index. The two metrics were applied to both historical (2008) and three possible future biomass production scenarios from the 2016 U.S. Billion‐Ton Report at the county level. For both historical and future scenarios, we found that the consumptive irrigation requirements for bioenergy feedstock account for <0.01% of annual streamflow in all but three counties in Nebraska. Results suggest that the irrigation demand of future biomass production could be supplied by annual renewable groundwater flow in about 94% of feedstock‐growing counties that use groundwater for irrigation, representing about 92% of production tonnage. Counties that require irrigation from nonrenewable groundwater resources are mostly located in the Northern Plains and Pacific regions. We also evaluated the sensitivity of crop water footprint estimation to soil moisture carryover by comparing blue water estimates from six different empirical and process‐based methods. Our findings suggest that accounting for preseason soil moisture is critical for representative blue water estimation, so that the irrigation water consumption is not overestimated. This is especially true in the Corn Belt region, where blue water estimates with and without preseason soil moisture would be about 1.9 versus 45.5 billion m 3 /year under the historical scenario. This difference is smaller in semiarid regions like the High Plains, but the blue water estimate can still triple if soil moisture is not considered. From the perspective of renewable surface water and groundwater resources, scaling feedstock production up in the High Plains and California will require careful planning integrated with water management strategies to improve water resource conservation.

09 BIOMASS FUELS↗

Atomically dispersed manganese catalysts for oxygen reduction in proton-exchange membrane fuel cells

Platinum group metal (PGM)-free catalysts that are also Fe-free are highly desirable for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells, as they avoid possible Fenton reactions. Here we report an efficient ORR catalyst that consists of atomically dispersed nitrogen-coordinated single Mn sites on partially graphitic carbon (Mn-N-C). Evidence for the embedding of the atomically dispersed MnN 4 moieties within the carbon surface-exposed basal planes was established by X-ray absorption spectroscopy and their dispersion was confirmed by aberration-corrected electron microscopy with atomic resolution. The Mn-N-C catalyst exhibited a half-wave potential of 0.80 V vs. RHE, approaching that of Fe-N-C catalysts, along with significantly enhanced stability in acidic media. The encouraging performance of the Mn-N-C catalyst as a PGM-free cathode was demonstrated in fuel cell tests. First-principles calculations further support the MnN 4 sites as the origin of the ORR activity via a 4e - pathway in acidic media.

25 ENERGY STORAGE↗

Mn- and N- doped carbon as promising catalysts for oxygen reduction reaction: Theoretical prediction and experimental validation

Development of platinum group metal (PGM)-free as well as iron-free electrocatalysts is imperative to achieve low-cost and long-term durability of polymer electrolyte membrane fuel cells. Here in this paper, we combined computational and experimental studies to investigate the mechanism, activity, and durability of Mn and N co-doped carbon (denoted as Mn-N-C) as promising catalysts for oxygen reduction reaction (ORR) in challenging acid medium. The first-principles density functional theory calculations predict that it is favorable for O 2 to be reduced into H 2 O via four-electron pathway on MnN 4 sites embedded in carbon layer. Using the reaction energies calculated from DFT, microkinetic analysis predicts that the MnN 4 sites could catalyze ORR with a half-wave potential only 60 mV lower than that of Pt (111) and 80 mV lower than that of the FeN 4 sites embedded in carbon layer, assuming the same density of active sites in the catalysts. Motivated by the computational prediction, we synthesized a Mn-N-C catalyst using a polymer (i.e., polyaniline-PANI) hydrogel precursors via a high temperature approach. Structural characterization indicates that atomically dispersed Mn sites coordinated with N are very likely formed in the catalyst. Electrochemical measurements show that the synthesized Mn-N-C catalyst can promote four-electron ORR with a catalytic activity in acids comparable to that of the Fe-N-C catalyst prepared using the same procedure. More importantly, the Mn-N-C catalyst exhibits superior potential cyclic stability, only losing 20 mV after 10000 cycles (0.6 to 1.0 V in O 2 saturated electrolyte). In comparison, the Fe-N-C catalyst would loss 80 mV after only 5000 cycles under the same testing conditions. Our computational and experimental results strongly suggest that the Mn and N co-doped carbon could be promising high-performance catalysts for ORR in acidic medium.

25 ENERGY STORAGE↗

Advanced Catalysts and Membrane Electrode Assemblies (MEAs) for Reversible Alkaline Membrane Fuel Cells (Final Technical Report)

A reversible AMFC combines a fuel cell and an electrolyzer and can be used as an energy storage device. It can convert electrical energy to hydrogen, as storable fuel, and then use it in the fuel cell to provide electricity when needed. The major advantages of reversible fuel cells over batteries are the ability to store great quantities of energy. However, reversible AMFCs have not been widely deployed due to several limiting factors, including low performance of bi functional catalysts, instability of anion-exchange membranes and water management problems. This project will develop high-performance durable catalysts and MEAs that will address these problems. These MEAs will be integrated with other advanced components to construct reversible AMFCs. The performance, durability and efficiency of reversible AMFCs will be evaluated.

08 HYDROGEN↗