Engineering Papers⌕ Search

Engineering topics

Xu, Hongwu

Publications and source records attributed to Xu, Hongwu.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Thermodynamic properties and enhancement of diamagnetism in nitrogen doped lutetium hydride synthesized at high pressure

Nitrogen doped lutetium hydride has drawn global attention in the pursuit of room-temperature superconductivity near ambient pressure and temperature. However, variable synthesis techniques and uncertainty surrounding nitrogen concentration have contributed to extensive debate within the scientific community about this material and its properties. We used a solid-state approach to synthesize nitrogen doped lutetium hydride at high pressure and temperature (HPT) and analyzed the residual starting materials to determine its nitrogen content. High temperature oxide melt solution calorimetry determined the formation enthalpy of LuH 1.96 N 0.02 (LHN) from LuH 2 and LuN to be −28.4 ± 11.4 kJ/mol. Magnetic measurements indicated diamagnetism which increased with nitrogen content. Ambient pressure conductivity measurements observed metallic behavior from 5 to 350 K, and the constant and parabolic magnetoresistance changed with increasing temperature. High pressure conductivity measurements revealed that LHN does not exhibit superconductivity up to 26.6 GPa. We compressed LHN in a diamond anvil cell to 13.7 GPa and measured the Raman signal at each step, with no evidence of any phase transition. Despite the absence of superconductivity, a color change from blue to purple to red was observed with increasing pressure. Thus, our findings confirm the thermodynamic stability of LHN, do not support superconductivity, and provide insights into the origins of its diamagnetism.

Science & Technology - Other Topics↗
DOE OSTI2023

In Situ High-Temperature Raman Spectroscopy of UCl 3 : A Combined Experimental and Theoretical Study

Uranium trichloride (UCl 3 ) has received growing interest for its use in uranium-fueled molten salt reactors and in the pyrochemical processing of used fuel. In this paper, we report for the first time the experimentally determined Raman spectra of UCl 3 , at both ambient condition and in situ high temperatures up to 871 K. The frequencies of five of the Raman-active vibrational modes (v i ) of UCl 3 exhibit a negative temperature derivative ((∂ν i /∂T) P ) with increasing temperature. Here, this red-shift behavior is likely due to the elongation of U–Cl bonds. The average isobaric mode Grüneisen parameter (γ iP = 0.91 ± 0.02) of UCl 3 was determined through use of the coefficient of thermal expansion published in Vogel et al. (2021) and the (∂ νi /∂T) P values determined in this study. These results are in general agreement with those calculated here by density functional theory (DFT+U). Finally, a comparison of the ambient band positions of UCl 3 to those of isostructural lanthanide (La–Eu) and actinide chlorides (Am–Cf) has been made.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Energetics of oxidation and formation of uranium monocarbide

To enable better implementation of uranium monocarbide (UC) as an advanced nuclear fuel for future high-temperature reactors, it is essential to have a thorough knowledge of its thermal and thermodynamic properties under reactor operational conditions. In this work, we studied thermal bulk oxidation of UC by simultaneous thermal analysis consisting of thermogravimetric analysis – differential scanning calorimetry coupled with evolved gas mass spectrometry (TGA-DSC-MS), and we examined the thermodynamic stability of UC using high temperature oxide melt drop solution calorimetry. Further, in air, our studied UC sample (which contains ~5 mol% UO 2 ) was found to undergo a step-wise thermal oxidation process consisting of consecutive oxidations and thermal decomposition reactions: 0.95UC·0.05UO 2 → UO 3 ·0.29(C x O y ) + 0.66CO 2 → UO 3 ·0.20(C x O y ) + 0.09CO 2 → UO 3 ·0.03(C x O y ) + 0.17CO 2 → U 3 O 8 + 0.03CO 2 + 0.166O 2 . DSC was further used to determine the enthalpies of reactions associated with this series of oxidation reactions. Synchrotron X-ray diffraction (XRD) and extended X-ray absorption spectroscopy (EXAFS) were performed to characterize both the long- and short-range structures of UC. The standard enthalpy of formation (ΔH° f ) of UC was determined to be –50.7 ± 10.8 kJ/mol·atom, in good agreement with previous values measured by bomb calorimetry. Lastly, the enthalpic landscape of U-C compounds, including UC, U 2 C 3 , and α-UC 1.94 , were established based on the enthalpy normalized per mole atom, which suggests that U-C phases are thermodynamically stable at lower C/U ratios.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Small-Angle Neutron Scattering Investigation of Oil Recovery in Mineralogically Distinct Wolfcamp Shale Strata

Understanding and improving hydrocarbon yields during enhanced oil recovery (EOR) in unconventional reservoirs is complicated by the intrinsic mineralogical and geochemical heterogeneity of shale formations. Here, in this study, we utilized small-angle neutron scattering (SANS) and ultra-small-angle neutron scattering (USANS) to investigate the degree of oil retention and its location in the nanoporous shale matrix for two mineralogically distinct shale samples. The two samples, dubbed “dark” and “light” based on their color, were taken from adjacent strata in a Wolfcamp shale core. While both samples contained kerogen, the dark sample contained more kerogen and clay (43.7 wt %) while the light sample contained more calcite (54.9 wt %). Samples were presaturated with decane, a model hydrocarbon, prior to pressure cycling with methane. Results showed significantly more retention of decane in 1.5–10 nm radius pores of both, likely indicating that oil is retained within kerogen nanopores. Although the dark sample had a higher porosity of 8.7%, versus 3.3% for the light sample, more pores were accessible to decane and a higher percentage of the imbibed decane was removable from the light sample compared to the dark sample. The majority of decane was not recoverable for the dark sample, indicating that EOR with methane can be challenging. These new findings can help to model expected recoveries of in-place oil from heterogeneous shale formations, as well as inform improved EOR strategies.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2023

High-Pressure Structural and Thermodynamic Properties of Cerium Orthosilicates (CeSiO 4 )

Pressure-induced phase transitions from the zircon structure-type (I4 1 /amd) to the scheelite structure type (I4 1 /a) are known for many ternary oxides systems (ABO 4 ). In this work, we present the first high-pressure study on synthetic stetindite (CeSiO 4 ) by a combination of in situ high-pressure synchrotron powder X-ray diffraction up to 36 GPa, implemented with and without dual sided laser heating, and in situ high-pressure Raman spectroscopy up to 43 GPa. Two phase transitions were identified: zircon to a high-pressure low-symmetry (HPLS) phase at 15 GPa and then to a scheelite at 18 GPa. The latter from HPLS scheelite phase was found irreversible; i.e., scheelite is fully quenchable at ambient conditions, as in other zircon-type phases. The bulk moduli (K 0 ) of stetindite, HPLS, and high-pressure scheelite phases were determined, respectively, as 171(5), 105(4), and 221(40) GPa by fitting to a second-order Birch-Murnaghan equation of state. The pressure derivatives of vibrational modes and Gru''neisen parameters of the zircon-structured polymorph are similar to those of other orthosilicate minerals. In conclusion, due to the larger ionic radii of Ce 4+ , with respect to Zr 4+ , stetindite was found to possess a softer bulk modulus and undergo the phase transitions at a lower pressure than zircon (ZrSiO 4 ), such observations are consistent with what were found in coffinite (USiO 4 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Energetics of oxidation and formation of uranium mononitride

Uranium mononitride (UN) is an advanced nuclear fuel currently being considered for use in several generation IV fast and thermal neutron spectrum core designs, with additional applications to thermal and electric nuclear propulsion reactors. Here, to better understand the thermal behavior and thermodynamic stability of UN, we investigated the bulk thermal oxidation process and thermochemical reactions, including the enthalpy of oxidation and standard enthalpy of formation, by conducting thermalgravimetric analysis – differential scanning calorimetry coupled with mass spectrometry (TGA-DSC-MS), and high temperature transposed temperature drop and oxide melt drop solution calorimetry. The bulk oxidation of UN (containing a small amount of α-UN 1.5+x ) in air was found to follow a step-wise process characterized by consecutive oxidative reactions UN-UN 1.5+x -UO 2 → UO 2 -UO 3 —N k → UO 3 —N k → UO 3 → U 3 O 8 . TGA results support that the UO 2 – U 2 N 3+x passivating layer delays the onset of rapid bulk oxidation of UN in air up to 662 K. Synchrotron X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) analyses were performed to characterize UN and its final oxidized product. The standard enthalpy of formation (ΔH° f ) of UN was determined to be –144.4 ± 5.9 kJ/mol·atom, in good agreement with previously determined values from Pt encapsulation and bomb calorimetric experiments. Lastly, a negative linear correlation between ΔH° f and the N/U molar ratio was established based on the thermochemical data obtained in this work and previously reported enthalpies of formations of β-UN 1.5-x and α-UN 1.5+x .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

LANL Activities on Mechanistic Approach to Analyzing and Improving Unconventional Hydrocarbon Production

Hydrocarbon production from shale reservoirs is inherently inefficient and challenging since these are low permeability plays. In addition, there is a limited understanding of the fundamentals and the controlling mechanisms, further complicating how to optimize these plays. Herein, we summarize our experimental and computational efforts fully and partially supported by the fundamental shale portfolio to reveal unconventional shale fundamentals and devise development strategies to enhance extraction efficiency with a minimal environmental footprint. Integrating these fundamentals with machine learning, we outline a pathway to improve the predictive power of our models, which enhances the forecast quality of production, thereby improving the economics of operations in unconventional reservoirs. For instance, we have developed science informed workflows and platforms for optimizing pressure-drawdown at a site, which allow operators to make reservoir-management decisions that optimize recovery in consideration of future production. Recently, our work relies on the hybridization of physics-based prediction and machine learning, whereby accurate synthetic data (combined with available site data) can enable the application of machine learning methods for rapid forecasting and optimization. Consequently, the workflow and platform are readily extendable to operations at other sites, plays, and basins.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2022

Gas diffusion through variably-water-saturated zeolitic tuff: Implications for transport following a subsurface nuclear event

Noble gas transport through geologic media has important applications in the characterization of underground nuclear explosions (UNEs). Without accurate transport models, it is nearly impossible to distinguish between xenon signatures originating from civilian nuclear facilities and UNEs. Understanding xenon transport time through the earth is a key parameter for interpreting measured xenon isotopic ratios. One of the most challenging aspects of modeling gas transport time is accounting for the effect of variable water saturation of geological media. In this study, we utilize bench-scale laboratory experiments to characterize the diffusion of krypton, xenon, and sulfur hexafluoride (SF6) through intact zeolitic tuff under different saturations. Here, we demonstrate that the water in rock cores with low partial saturation dramatically affects xenon transport time compared to that of krypton and SF6 by blocking sites in zeolitic tuff that preferentially adsorb xenon. This leads to breakthrough trends that are strongly influenced by the degree of the rock saturation. Xenon is especially susceptible to this phenomenon, a finding that is crucial to incorporate in subsurface gas transport models used for nuclear event identification. We also find that the breakthrough of SF6 diverges significantly from that of noble gases within our system. When developing field scale models, it is important to understand how the behavior of xenon deviates from chemical tracers used in the field, such as SF6 (Carrigan et al., 1996). These new insights demonstrate the critical need to consider the interplay between rock saturation and fission product sorption during transport modeling, and the importance of evaluating specific interactions between geomedia and gases of interest, which may differ from geomedia interactions with chemical tracers.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2022

Structure and thermodynamics of calcium rare earth silicate oxyapatites, Ca 2 RE 8 (SiO 4 ) 6 O 2 (RE = Pr, Tb, Ho, Tm)

Calcium rare earth silicate oxyapatites, (Ca 2 RE 8 (SiO 4 ) 6 O 2 ), are of interest as components of glass-ceramic nuclear waste forms. To assess their long-term behavior in a geologic repository, it is essential to determine their structure and thermodynamic stability at relevant conditions. Here, in this work, we performed detailed structural and thermodynamic investigations on Ca 2 Pr 8 (SiO 4 ) 6 O 2 , Ca 2 Tb 8 (SiO 4 ) 6 O 2 , Ca 2 Ho 8 (SiO 4 ) 6 O 2 , and Ca 2 Tm 8 (SiO 4 ) 6 O 2 by high energy synchrotron powder X-ray diffraction combined with Rietveld analysis and high temperature oxide melt drop solution calorimetry. Enthalpies of formation from constituent oxides (ΔH f,ox ) were determined to be -765.1 ± 22.8 kJ/mol for Ca 2 Pr 8 (SiO 4 ) 6 O 2 ; -638.9 ± 20.5 kJ/mol for Ca 2 Tb 8 (SiO 4 ) 6 O 2 ; -643.3 ± 10.3 kJ/mol for Ca 2 Ho 8 (SiO 4 ) 6 O 2 ; and -403.2 ± 5.1 kJ/mol for Ca 2 Tm 8 (SiO 4 ) 6 O 2 . These thermodynamic parameters were used in assessing the thermochemical stability of these phases in the presence of water vapor from room temperature to 600 K, as encountered in the subsurface environments of a geological repository.

36 MATERIALS SCIENCE↗