Engineering topics
Xu Liu
Publications and source records attributed to Xu Liu.
TPSAS-NF1676L-29942-DND
Explore the source record for details and available documents.
TPSAS-NF1676L-20905-DND
This presentation describes an Effective Stream radiative transfer model which is capable of speeding up the solar radiative transfer calculation by orders of magnitudes relative to the Line-by-line models.
TPSAS-NF1676L-18074-DND
Motivations - Radiative Transfer (RT) model is a component in satellite remote sensing (Observation System Simulation Experiment, sensor performance end-to-end simulations or sensitivity studies, and retrieval and data assimilations); - Line-by-line RT model is too slow, over a million RT needed to cover infrared spectral region; - Traditional Channel-based RT models deal with one channel at a time. Modern sensors have thousands of channels and 0.1-1 million spectra per day, only 4-10% of data are used in satellite data assimilations (too slow for climate OSSE). It is essential to have a RT model: - Accurate and fast - Works in all spectral regions - Includes as accurate physics as possible - Takes advantage of spectral correlations - Can handle cloud and aerosols PCRTM (Principal Component-based Radiative Transfer model) was developed to satisfy the need listed above.
TPSAS-NF1676L-18322-DND
MetOp-A satellite was launched on 19 October 2006 and MetOp-B was launched on 17 September 2013. Two satellites fly in complementary orbits and in a sun synchronous morning orbit passing over the Equator at the same local time 9:30 am. MetOp-B phased 50 minutes apart from MetOp-A. Presented here are the global surface IR emissivity spectra retrieved from IASI measurements observed from both MetOp-A and MetOp-B satellites. Inter-comparison of the emissivities obtained from MetOp-A and MetOp-B is performed to ensure the continuity of emissivity monitoring and its trend analysis. Effort on emissivity validation continues with available ground in-situ measurements and retrieval consistency check through radiative transfer model simulations. The spatial resolution of emissivity climatology atlas is now increased from 0.5 to 0.25 degrees latitude-longitude, and available to the community.
TPSAS-NF1676L-10574-DND
The Infrared Atmospheric Sounding Interferometer (IASI) aboard of MetOP-A was successfully launched on 19 October 2006 and has been providing excellent data for more than 3 years. The IASI spectra can be converted into proxy data for the NPOESS Crosstrack Infrared Sounder (CrIS) through a rigorous mathematical transformation by taking into account of instrument characteristics of both the IASI and the CrIS. The 15-channel AMSU temperature sounder, and the 5-channel and Microwave Humidity Sounder (MHS) aboard of MetOP-A can be used to generate proxy data for the NPOESS Advanced Technology Mircrowave Sounder (ATMS). The CrIS and ATMS make up the Cross-track Infrared and Microwave Sounder Suite (CrIMSS). CrIMSS will primarily provide global temperature, moisture, and pressure profiles. We will describe the method used in generating the proxy data and show results of using the proxy data for evaluation of the NPOESS CrIMSS Environmental Data Record (EDR) retrieval algorithm.
TPSAS-NF1676L-10888-DND
Hyperspectrally-resolved surface emissivities are derived with an algorithm utilizes a combined fast radiative transfer model (RTM) with a molecular RTM and a cloud RTM accounting for both atmospheric absorption and cloud absorption/scattering. Clouds are automatically detected and cloud microphysical parameters are retrieved; and emissivity is retrieved under clear and optically thin cloud conditions. The retrieval technique separates surface emissivity from skin temperature by representing the emissivity spectrum with eigenvectors derived from a laboratory measured emissivity database. Global land emissivities retrieved under the optically thin clouds are investigated by means of their accuracy in comparison with that under cloud-free conditions. Here we present the emissivity derived under optically thin clouds, their accuracy, and the inter-comparison with that under clear conditions.
TPSAS-NF1676L-10898-DND
The Infrared Atmospheric Sounding Interferometer (IASI) aboard of MetOP-A was successfully launched on 19 October 2006 and has been providing excellent data for more than 3 years. The IASI spectra can be converted into proxy data for the NPOESS Crosstrack Infrared Sounder (CrIS) through a rigorous mathematical transformation by taking into account of instrument characteristics of both the IASI and the CrIS. The 15-channel AMSU temperature sounder, and the 5-channel and Microwave Humidity Sounder (MHS) aboard of MetOP-A can be used to generate proxy data for the NPOESS Advanced Technology Mircrowave Sounder (ATMS). The CrIS and ATMS make up the Cross-track Infrared and Microwave Sounder Suite (CrIMSS). CrIMSS will primarily provide global temperature, moisture, and pressure profiles. We will describe the method used in generating the proxy data and show results of using the proxy data for evaluation of the NPOESS CrIMSS Environmental Data Record (EDR) retrieval algorithm.
Development of a High-Fidelity CLARREO Pathfinder Simulator
CLARREO Pathfinder is a hyperspectral instrument designed to resolve reflectance of solar radiation from Earth in the wavelength range of 350 nm to 2300 nm with an uncertainty of 0.3% (k=2) or less. Its success will demonstrate CLARREO’s ability to provide on-orbit SI-Traceable calibration of measured spectral reflectance with an advanced accuracy. The CLARREO pathfinder simulator has been developed to generate high-fidelity inter-calibration event data products that can be used for pre-launch inter-calibration algorithm study. A high-fidelity simulation for CLARREO inter-calibration events includes computationally intensive radiative transfer calculations for observations within each individual collocation footprint. A principal component based radiative transfer model is incorporated in the simulator to enable an ultra-fast forward simulation, ensuring a low latency data processing for month- to year-long intercalibration events. This paper introduces the design and development of the CLARREO pathfinder simulator and some of its applications for inter-calibration matching error evaluation.
CLARREO Pathfinder: Mission Overview and Current Status
The Climate Absolute Radiance and Refractivity Observatory (CLARREO) Pathfinder (CPF) mission consists of a high accuracy reflected solar spectrometer that will take measurements from the International Space Station for one year starting in 2023. CPF will demonstrate that its novel on-orbit absolute calibration approaches are capable of achieving 0.3% (1-sigma) radiometric uncertainty. Additionally, using its two-axis pointing gimbal which enables nearly-concurrent measurements matching look angles with other orbiting sensors, CPF will demonstrate a novel inter-calibration approach by inter-calibrating CERES and VIIRS. CPF is currently in its Final Design and Fabrication Stage and recently passed its Critical Design Review.
CLARREO Pathfinder: Mission Status and Current Status
The Climate Absolute Radiance and Refractivity Observatory (CLARREO) Pathfinder (CPF) mission consists of a high accuracy reflected solar spectrometer that will take measurements from the International Space Station for one year starting in 2023. CPF will demonstrate that its novel on-orbit absolute calibration approaches are capable of achieving 0.3% (1-sigma) radiometric uncertainty. Additionally, using its two-axis pointing gimbal which enables nearly-concurrent measurements matching look angles with other orbiting sensors, CPF will demonstrate a novel inter-calibration approach by inter-calibrating CERES and VIIRS. CPF is currently in its Final Design and Fabrication Stage and recently passed its Critical Design Review.
Investigation of the Potential for Lidar & Polarimeter Combined Aerosol Retrievals Using Various Instrument Combinations
As a scientific community, we are motivated to achieve better observational capabilities for aerosols, to reduce uncertainties about aerosol’s role in climate. Encouraged by the National Academies Decadal Survey, many are looking to the synergy of lidar and polarimeter as a means of achieving improved measurements. Polarimetric observations of total-column radiances have excellent sensitivity to aerosol size distribution and absorption properties. Active lidar measurements have fewer wavelengths and view angles and therefore more limited sensitivity to aerosol microphysical properties such as complex refractive index. Yet the advantage of vertically resolved profiles is game-changing, especially given that models contain significant uncertainty about the vertical distribution of aerosol and that polarimeter and other passive retrievals must make assumptions about vertical distribution which can impact performance. To optimize the synergy, a joint polarimeter + lidar mission requires a joint retrieval. However, the exact instruments that will be launched on a future satellite are unknown, and the capabilities of polarimeters and lidars cover a large range. In this study, we perform information content analysis for a range of nominal instrument combinations. The methodology is ideal for assessing the impact of measurements and a priori information (assumptions and constraints) with respect to the desired retrieval products, and for comparing measurement systems. It has advantages that make it useful in advance of or in parallel with retrieval development, such as producing quantitatively useful comparisons even for retrieval scenarios that are significantly underdetermined and therefore impossible to retrieve without significant assumptions, and it is not impacted by retrieval-specific sources of error such as incomplete or incorrect convergence which can complicate the interpretation of a retrieval performance analysis. Here, we will derive the expected uncertainty in retrieved aerosol concentration, effective radius, fine mode fraction and single scattering albedo, for a combination of a polarimeter with various grades of lidar, from an elastic backscatter lidar, similar to the pathfinder CALIOP on the CALIPSO satellite, to a multi-wavelength high spectral resolution lidar.
The PACE-MAPP Algorithm: Coupled Ocean/Aerosol Products
The PACE-MAPP algorithm, under development for combined SPEXone, HARP2 and OCI observations from NASA’s future Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) satellite mission, directly inverts the coupled atmosphere-ocean system to retrieve aerosol optical and microphysical properties and ocean optical properties simultaneously. PACE-MAPP thus retrieves the spectrally-resolved inherent optical properties of the Earth’s waters: the spectral particulate scattering coefficient, b_p (λ), the spectral absorption coefficient for particulates and color-dissolved matter, a_tot (λ), and the spectral particulate backscatter efficiency, b ̃_"bp". From these three spectrally-resolved components, we can derive the spectral particulate hemispherical backscattering coefficient b_bp (λ) and the spectral diffuse attenuation coefficient K_"d" (λ). Direct comparisons of b_"bp" (532) and K_"d" (532) are made to collocated High-Spectral Resolution Lidar (HSRL) in-water measurements. The PACE-MAPP algorithm was tested using PACE-analog datasets collected by Research Scanning Polarimeter (RSP) observations during the NASA NAAMES (The North Atlantic Aerosols and Marine Ecosystems Study) and SABOR (Ship-Aircraft Bio-Optical Research) airborne campaigns, both of which also include ship-based in situ measurements.
Tools for Performing SBG hyperspectral Observing System Simulation Experiment
One of NASA’s Decadal Survey mission, Surface Biology and Geology (SBG), will include a hyperspectral remote sensing imager, which has a very high spatial resolution and a wide spectral coverage (from UV to Near IR). Unprecedented large data volumes will be generated by the SBG hyperspectral instrument. Before the launch of the new satellite, an Observing System Simulation Experiment (OSSE) can be used to study different designs of the new satellite system. One of the key components in an OSSE study is a radiative transfer model (RTM) or forward model. In this presentation, we will describe a Principal Component-based Radiative Transfer Model (PCRTM) which is capable of simulating atmospheric (TOA) radiance or reflectance spectra from far IR to visible and UV spectral regions (50 wavenumber to 30000 wavenumber) quickly and accurately. Multiple scattering from multiple layers of clouds/aerosols are included in the model. The PCRTM has a very good accuracy relative to reference line-by-line radiative transfer models (LBLRTM), and it saves 3-4 orders of magnitude computational time relative to LBLRTM or MODTRAN. The PCRTM model has been successfully used to analyze large volumes of data from hyperspectral sensors such as AIRS, CrIS, and IASI. It has also been used to perform OSSE studies for the Climate Absolute Radiance and Refractivity Observatory (CLARREO) mission. Another useful tool for the OSSE is surface Bidirectional Reflectance Distribution Function (BRDF) database. It is very crucial for the SBG OSSE to include realistic BRDF spectra. Currently, most of the surface reflectance spectra such as those in the ECOSIS and ECOSTRESS are measured at specific observation geometries. We have developed a hyperspectral bidirectional reflectance (HSBR) model which combines Ross-Li BRDF model with the existing reflectance spectral libraries using a principal component analysis. This HSBR model can provide realistic BRDF spectra under various observation conditions. It can also be used to generate realistic BRDF spectra using measurements from multi-band imagers or spectrometers such as MODIS or VIIRS.
An Optimal Estimation Aerosol Retrieval Algorithm for Lidar-only and Combined Lidar Polarimeter Remote Sensors
Global measurements of aerosol vertical profile, composition, concentration, and size distribution are very important due to aerosol impacts on air quality, climate, clouds, and ocean ecosystems. We have developed a lidar-only and combined lidar and polarimeter algorithm to retrieve vertically-resolved profiles of aerosol microphysical properties. The new retrieval system is modular in design. It consists of three modules, a vertically-resolved aerosol profile retrieval module for lidar data, an aerosol and cloud/ocean retrieval module for polarimeter data, and a combined retrieval module for both lidar and polarimeter measurements. In addition to performing optimal estimation retrievals on various data sources, we have designed the system so that it can be used to carry out aerosol retrieval performance trade studies for various lidar and polarimeter configurations. For example, the retrieval system can take inputs from attenuated backscatter lidar at two wavelengths (e.g. CALIPSO like instrument), aerosol backscattering measured at two wavelengths and and aerosol extinction measured at one wavelength (HSRL-1), or aerosol backscattering measured at three wavelengths and aerosol extinction measured at two wavelengths (HSRL-1) (HSRL-2). We have applied the lidar-only algorithm to both simulated data and various field campaign data (DISCOVER-AQ, CHARMS, TCAP, and ORACLES). For polarimeter-only modules, we have done the same for SABOR, TCAP, NAAMES, and ORACLES data. We have applied the combined retrieval algorithm to ORACLES data. The simulated retrieval studies show that the combined lidar+polarimeter retrieval provides much higher information content relative to their individual counterparts for retrieving effective radius, particle concentrations, and absorption properties.
Deriving Weather and Climate Products from IR Sounders using Single FOV Retrieval and Spectral Fingerprinting Methods
A virtual presentation for NASA Sounder Science Team Meeting