Engineering Papers⌕ Search

Engineering topics

Xie, Shaocheng

Publications and source records attributed to Xie, Shaocheng.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Remote effects of Tibetan Plateau spring land temperature on global subseasonal to seasonal precipitation prediction and comparison with effects of sea surface temperature: the GEWEX/LS4P Phase I experiment

The prediction skill for precipitation anomalies in late spring and summer months—a significant component of extreme climate events—has remained stubbornly low for years. This paper presents a new idea that utilizes information on boreal spring land surface temperature/subsurface temperature (LST/SUBT) anomalies over the Tibetan Plateau (TP) to improve prediction of subsequent summer droughts/floods over several regions over the world, East Asia and North America in particular. The work was performed in the framework of the GEWEX/LS4P Phase I (LS4P-I) experiment, which focused on whether the TP LST/SUBT provides an additional source for subseasonal-to-seasonal (S2S) predictability. The summer 2003, when there were severe drought/flood over the southern/northern part of the Yangtze River basin, respectively, has been selected as the focus case. With the newly developed LST/SUBT initialization method, the observed surface temperature anomaly over the TP has been partially produced by the LS4P-I model ensemble mean, and 8 hotspot regions in the world were identified where June precipitation is significantly associated with anomalies of May TP land temperature. Consideration of the TP LST/SUBT effect has produced about 25–50% of observed precipitation anomalies in most hotspot regions. The multiple models have shown more consistency in the hotspot regions along the Tibetan Plateau-Rocky Mountain Circumglobal (TRC) wave train. The mechanisms for the LST/SUBT effect on the 2003 drought over the southern part of the Yangtze River Basin are discussed. For comparison, the global SST effect has also been tested and 6 regions with significant SST effects were identified in the 2003 case, explaining about 25–50% of precipitation anomalies over most of these regions. This study suggests that the TP LST/SUBT effect is a first-order source of S2S precipitation predictability, and hence it is comparable to that of the SST effect. With the completion of the LS4P-I, the LS4P-II has been launched and the LS4P-II protocol is briefly presented.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Understanding Changes in Cloud Simulations from E3SM Version 1 to Version 2

This study documents clouds simulated by the Energy Exascale Earth System Model (E3SM) version 2 (E3SMv2) and attempts to understand what causes the model behavior change in clouds relative to E3SMv1. This is done by analyzing the last 30-year (1985–2014) data from the 165-year historical simulations using E3SMv1 and v2 and four sensitivity tests to isolate the impact of changes in model parameter choices in its turbulence, shallow convection, and cloud macrophysics parameterization (CLUBB), microphysical parameterization (MG2), and deep convection scheme (ZM), as well as model physics changes in convective triggering. It is shown that E3SMv2 significantly improves the simulation of subtropical coastal stratocumulus clouds (Sc) and clouds with optical depth larger than 3.6 over the stratocumulus to cumulus transition regimes, where Shortwave Cloud Radiative Effect (SWCRE) is also improved, and the Southern Ocean (SO) while seeing an overall slight degradation in low clouds over other tropical and subtropical oceans. The better performance in E3SMv1 over those regions is partially due to error compensation between its simulated optically thin and intermediate low clouds for which E3SMv2 actually improves simulation of optically intermediate low clouds. Sensitivity tests indicate that the changes in low clouds are primarily due to the tuning made in CLUBB. The impact of the ZM tuning is mainly on optically intermediate and thick high clouds, contributing to improved SWCRE and Longwave Cloud Radiative Effect (LWCRE). The impact of the MG2 tuning and the new convective trigger is primarily on the high latitudes and the Southern Ocean (SO). They have a relatively smaller impact on clouds than do the CLUBB and ZM tunings. This study offers additional insights about clouds simulated in E3SMv2 by utilizing multiple data sets and the COSP diagnostic tool as well as through sensitivity tests. The improved understanding will benefit the future E3SM developments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Evaluating EAMv2 Simulated High Latitude Clouds Using ARM Measurements in the Northern and Southern Hemispheres

Here, this study evaluates high latitude stratiform mixed-phase clouds (SMPC) in the atmosphere model of the Energy Exascale Earth System Model version 2 (EAMv2) by utilizing one-year-long ground-based remote sensing measurements from the Atmospheric Radiation and Measurement (ARM) program. A nudging approach is applied to model simulations for a constrained comparison with the ARM observations. Observed and modeled SMPCs are sampled and collocated to address the difference in data resolution, so that we can consistently evaluate their macrophysical properties at the North Slope of Alaska (NSA) site in the Arctic and the McMurdo (AWR) site in the Antarctic. We found that EAMv2 overestimates SMPC frequency of occurrence at both sites. However, the model captures the observed larger cloud frequency of occurrence at the NSA site. For collocated SMPCs, the annual statistics of observed cloud macrophysics are generally reproduced at the NSA site, while at the AWR site, there are larger biases. Compared to the AWR site, the lower cloud top and cloud base and the warmer cloud top temperature observed at NSA are well simulated. On the other hand, simulated cloud phase is substantially biased. The model largely overestimates liquid water path, and the ice water path is underestimated at NSA, but at AWR, the liquid water path is frequently underestimated due to the dominance of snow in Antarctic SMPCs. As a result, the observed hemispheric difference in cloud phase partitioning is misrepresented in EAMv2. This study implies that additional model development is needed for high latitude mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

The fully coupled regionally refined model of E3SM version 2: overview of the atmosphere, land, and river results

Abstract. This paper provides an overview of the United States (US) Department of Energy's (DOE's) Energy Exascale Earth System Model version 2 (E3SMv2) fully coupled regionally refined model (RRM) and documents the overall atmosphere, land, and river results from the Coupled Model Intercomparison Project 6 (CMIP6) DECK (Diagnosis, Evaluation, and Characterization of Klima) and historical simulations – a first-of-its-kind set of climate production simulations using RRM. The North American (NA) RRM (NARRM) is developed as the high-resolution configuration of E3SMv2 with the primary goal of more explicitly addressing DOE's mission needs regarding impacts to the US energy sector facing Earth system changes. The NARRM features finer horizontal resolution grids centered over NA, consisting of 25→100 km atmosphere and land, a 0.125∘ river-routing model, and 14→60 km ocean and sea ice. By design, the computational cost of NARRM is ∼3× of the uniform low-resolution (LR) model at 100 km but only ∼ 10 %–20 % of a globally uniform high-resolution model at 25 km. A novel hybrid time step strategy for the atmosphere is key for NARRM to achieve improved climate simulation fidelity within the high-resolution patch without sacrificing the overall global performance. The global climate, including climatology, time series, sensitivity, and feedback, is confirmed to be largely identical between NARRM and LR as quantified with typical climate metrics. Over the refined NA area, NARRM is generally superior to LR, including for precipitation and clouds over the contiguous US (CONUS), summertime marine stratocumulus clouds off the coast of California, liquid and ice phase clouds near the North Pole region, extratropical cyclones, and spatial variability in land hydrological processes. The improvements over land are related to the better-resolved topography in NARRM, whereas those over ocean are attributable to the improved air–sea interactions with finer grids for both atmosphere and ocean and sea ice. Some features appear insensitive to the resolution change analyzed here, for instance the diurnal propagation of organized mesoscale convective systems over CONUS and the warm-season land–atmosphere coupling at the southern Great Plains. In summary, our study presents a realistically efficient approach to leverage the fully coupled RRM framework for a standard Earth system model release and high-resolution climate production simulations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Understanding Dynamics and Thermodynamics of ENSO and Its Complexity Simulated by E3SM and Other Climate Models

Despite the seeming success of most state-of-the-art climate models in simulating the El Niño-Southern Oscillation (ENSO), there is strong evidence that models achieve realistic levels of ENSO activity do so often for wrong reasons. This is owing to an often occurred near cancelation of large errors in terms of contributions to ENSO growth rate from coupled dynamic and thermodynamic feedback processes. Climate models remain deficient in simulating the observed ENSO’s spatial and temporal complexity that involves interplays of coupled dynamic and thermodynamic feedbacks, interactions across multiple scales, nonlinear processes in the tropical atmosphere and ocean system, biases in mean sate and physical processes, and influences external to equatorial Pacific coupled ENSO dynamics. Our proposed research aims at advancing predictive and process-level understandings of ENSO simulated in E3SM and other climate models under current and future climate conditions with two main objectives: (i) better understanding the aforementioned broad range interactive processes and sources that control fundamental properties of ENSO in E3SM and CIMP6 outputs as well as in observational (reanalysis) data sets, using a hierarchical of coupled dynamical frameworks consisting of theoretical analysis, intermediate complexity modeling, and coupled dynamic diagnostics; (ii) to use this understanding to explore pathways towards improving E3SM’s capability of simulating ENSO and its complexity. More specifically, we will focus on four main thrusts of research: (1) ENSO’s dynamic and thermodynamic feedbacks; (2) the across-scale interactions of ENSO with annual cycle and MJO/WWB/TIW (Madden Julian Oscillation/Westerly Wind Burst/Tropical Instability Wave) activity; (3) key nonlinear processes of ENSO involving atmospheric convective thresholds, nonlinear ocean dynamic heating, and thermocline outcropping; and (4) the impacts of climate mean-state biases/changes and perturbed physical processes on simulated ENSO and its complexity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The DOE E3SM Model Version 2: Overview of the Physical Model and Initial Model Evaluation

Abstract This work documents version two of the Department of Energy's Energy Exascale Earth System Model (E3SM). E3SMv2 is a significant evolution from its predecessor E3SMv1, resulting in a model that is nearly twice as fast and with a simulated climate that is improved in many metrics. We describe the physical climate model in its lower horizontal resolution configuration consisting of 110 km atmosphere, 165 km land, 0.5° river routing model, and an ocean and sea ice with mesh spacing varying between 60 km in the mid‐latitudes and 30 km at the equator and poles. The model performance is evaluated with Coupled Model Intercomparison Project Phase 6 Diagnosis, Evaluation, and Characterization of Klima simulations augmented with historical simulations as well as simulations to evaluate impacts of different forcing agents. The simulated climate has many realistic features of the climate system, with notable improvements in clouds and precipitation compared to E3SMv1. E3SMv1 suffered from an excessively high equilibrium climate sensitivity (ECS) of 5.3 K. In E3SMv2, ECS is reduced to 4.0 K which is now within the plausible range based on a recent World Climate Research Program assessment. However, a number of important biases remain including a weak Atlantic Meridional Overturning Circulation, deficiencies in the characteristics and spectral distribution of tropical atmospheric variability, and a significant underestimation of the observed warming in the second half of the historical period. An analysis of single‐forcing simulations indicates that correcting the historical temperature bias would require a substantial reduction in the magnitude of the aerosol‐related forcing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Development and Evaluation of E3SM‐MOSAIC: Spatial Distributions and Radiative Effects of Nitrate Aerosol

Abstract Nitrate aerosol plays an important role in affecting regional air quality as well as Earth's climate. However, it is not well represented or even neglected in many global climate models. In this study, we couple the Model for Simulating Aerosol Interactions and Chemistry (MOSAIC) module with the four‐mode version of the Modal Aerosol Module (MAM4) in DOE's Energy Exascale Earth System Model version 2 (E3SMv2) to simulate nitrate aerosol and its radiative effects. We find that nitrate aerosol simulated by E3SMv2‐MAM4‐MOSAIC is sensitive to the treatment of gaseous HNO 3 transfer to/from interstitial particles related to accommodation coefficients of HNO 3 ( ) on dust and non‐dust particles. We compare three different treatments of HNO 3 transfer: (a) a treatment (MTC_SLOW) that uses a low in the mass transfer coefficient (MTC) calculation; (b) a dust‐weighted MTC treatment (MTC_WGT) that uses a high on non‐dust particles; and (c) a dust‐weighted MTC treatment that also splits coarse mode aerosols into the coarse dust and sea salt sub‐modes in MOSAIC (MTC_SPLC). MTC_WGT and MTC_SPLC increase the global annual mean (2005–2014) nitrate burden from 0.096 (MTC_SLOW) to 0.237 and 0.185 Tg N, respectively, mostly in the coarse mode. MTC_WGT and MTC_SPLC also produce stronger nitrate direct radiative forcing (−0.048 and −0.051 W m −2 , respectively) and indirect forcing (−0.33 and −0.35 W m −2 , respectively) than MTC_SLOW (−0.021 and −0.24 W m −2 ). MTC_WGT and MTC_SPLC improve nitrate surface concentrations over remote oceans based on limited observations and vertical profiles of nitrate concentrations against aircraft measurements below 400 hPa.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Diurnal cycle of precipitation over global monsoon systems in CMIP6 simulations

Accurate simulation of the diurnal cycle of precipitation over different climate regimes, including global monsoon systems, is an ongoing challenge for current state-of-the-art climate models. Here, in this study, the diurnal cycles of summertime precipitation from 21 CMIP6 historical simulations are evaluated with the NASA IMERG data via the diurnal harmonic amplitude and phase from the Fourier analysis in seven regional monsoon systems: Northern and Southern Africa monsoons, South Asia monsoon, East Asia monsoon, Australia monsoon, and North and South America monsoons. Particularly, we focus on four subregions including ocean, coastal ocean, land, and coastal land considering the different underlying physical processes. It is found that the CMIP6 historical simulations perform fairly well on reproducing the diurnal cycle of precipitation over ocean and coastal ocean, while the simulated diurnal harmonic phase and amplitude over land and coastal land show larger biases and model spread compared to biases over ocean and coastal ocean. The simulation of precipitation diurnal cycle is substantially improved in the multi-model mean of both CMIP6 historical and CMIP6 AMIP simulations compared with that of CMIP5 historical simulations. But the model bias of precipitation diurnal cycle is in general similar between CMIP6 AMIP and CMIP6 historical simulations, which suggests that the impact of the interactive ocean on the simulated diurnal precipitation averaged over a large domain is generally minor. The influence of model resolution on the diurnal cycle is shown in mixed directions across various subregions, and significant improvement from the low- to high-resolution models is only notable over coastal ocean.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Cloud Phase Simulation at High Latitudes in EAMv2: Evaluation using CALIPSO Observations and Comparison with EAMv1

This study performs a comprehensive evaluation of the simulated cloud phase in the U.S. Department of Energy (DOE) Energy Exascale Earth System Model (E3SM) atmosphere model version 2 (EAMv2) and version 1 (EAMv1). Enabled by the CALIPSO (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation) simulator, EAMv2 and EAMv1 predicted cloud phase is compared against the GCM-Oriented CALIPSO Cloud Product (CALIPSO-GOCCP) at high latitudes where mixed-phase clouds are prevalent. Our results indicate that the underestimation of cloud ice in simulated high-latitude mixed-phase clouds in EAMv1 has been significantly reduced in EAMv2. The increased ice clouds in the Arctic mainly result from the modification on the WBF (Wegner-Bergeron-Findeisen) process in EAMv2. The impact of the modified WBF process is moderately compensated by the low limit of cloud droplet number concentration (CDNC) in cloud microphysics and the new dCAPE_ULL trigger used in deep convection in EAMv2. Moreover, it is found that the new trigger largely contributes to the better cloud phase simulation over the Norwegian Sea and Barents Sea in the Arctic and the Southern Ocean where large errors are found in EAMv1. However, errors in simulated cloud phase in EAMv1, such as the overestimation of supercooled liquid clouds near the surface in both hemispheres and the underestimation of ice clouds over Antarctica, persist in EAMv2. In conclusion, this study highlights the impact of deep convection parameterizations, which has received little attention, on high-latitude mixed-phase clouds, and the importance of continuous improvement of cloud microphysics in climate models for accurately representing mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

ARM data-oriented metrics and diagnostics package for climate model evaluation (ARM-DIAGS-V3) version 3

A Python-based metrics and diagnostics package is currently being developed by the ARM Infrastructure Team at Lawrence Livermore National Laboratory to facilitate the use of long-term high frequency measurements from the ARM program in evaluating the regional climate simulation of clouds, radiation, precipitation, and aerosols. This metrics and diagnostics package computes climatological means of targeted climate model simulation and generates tables and plots for comparing the model simulation with ARM observational data. The CMIP model data sets are also included in the package to enable model inter-comparison as demonstrated in Zhang et al. (2018) and Zhang et al. (2020). The mean of the CMIP model can be served as a reference for individual models. Basic performance metrics are computed to measure the accuracy of mean state and variability of climate models. The evaluated physical quantities include cloud fraction, temperature, relative humidity, cloud liquid water path, total column water vapor, precipitation, sensible and latent heat fluxes, aerosol optical depth, and radiative fluxes, with plan to extend to more fields, such as the evaluation of model simulated aerosol physicochemical properties and cloud microphysics properties. Process-oriented diagnostics focusing on aerosol, cloud, and precipitation-related phenomena are also being developed for the evaluation and development of specific model physical parameterizations. In addition to the Southern Great Plains (SGP), North Slope of Alaska (NSA) and Tropical Western Pacific (TWP) atmospheric observatories in the ARMDIAGS version 2.0, the version 3.0 package have extended to the data collected at the ARM Eastern North Atlantic (ENA) atmospheric observatory and the Observation and Modeling of the Green Ocean Amazon (GOAMAZON) field campaign. The metrics and diagnostics package are currently built upon standard Python libraries and additional Python packages developed by DOE (CDAT). The ARM metrics and diagnostic package is available publicly with the hope that it can serve as an easy entry point for climate modelers to compare their models with ARM data. In this report, we first provide an overview of major metrics in section 2. The input data, which constitutes the core content of the metrics and diagnostics package, is summarized in section 3. A user's guide documenting the workflow/structure of the version 3.0 codes and including step-by-step instruction for running the package is described in section 4.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Evaluating Tropical Precipitation Relations in CMIP6 Models with ARM Data

Abstract A set of diagnostics based on simple, statistical relationships between precipitation and the thermodynamic environment in observations is implemented to assess phase 6 of the Coupled Model Intercomparison Project (CMIP6) model behavior with respect to precipitation. Observational data from the Atmospheric Radiation Measurement (ARM) permanent field observational sites are augmented with satellite observations of precipitation and temperature as an observational baseline. A robust relationship across observational datasets between column water vapor (CWV) and precipitation, in which conditionally averaged precipitation exhibits a sharp pickup at some critical CWV value, provides a useful convective onset diagnostic for climate model comparison. While a few models reproduce an appropriate precipitation pickup, most models begin their pickup at too low CWV and the increase in precipitation with increasing CWV is too weak. Convective transition statistics compiled in column relative humidity (CRH) partially compensate for model temperature biases—although imperfectly since the temperature dependence is more complex than that of column saturation. Significant errors remain in individual models and weak pickups are generally not improved. The conditional-average precipitation as a function of CRH can be decomposed into the product of the probability of raining and mean precipitation during raining times (conditional intensity). The pickup behavior is primarily dependent on the probability of raining near the transition and on the conditional intensity at higher CRH. Most models roughly capture the CRH dependence of these two factors. However, compensating biases often occur: model conditional intensity that is too low at a given CRH is compensated in part by excessive probability of precipitation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Translator Plan: A Coordinated Vision for Fiscal Years 2023-2025

Translators serve a unique role in the U.S. Department of Energy (DOE)’s Atmospheric Radiation Measurement (ARM) user facility, offering scientific input through various leadership and service roles. The Translators direct the creation of value-added products (VAPs) and analysis tools that make ARM measurements more accessible to the scientific community. Translators also serve as liaisons between users and the ARM infrastructure, collecting information about priorities and communicating ARM data and services. A key group focus is supporting the DOE Atmospheric System Research (ASR) program scientists and ASR’s efforts towards a process-level understanding of cloud-aerosol interactions, and in reducing uncertainty in global climate model projections. The ARM Translator Group (Table 1) consists of the five Translators, a representative of software development, and one from the Data Quality Office (DQO). Additionally, the ARM Engineering and Process Manager participates in this group and provides input and direction from ARM and its programmatic priorities.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Effective radiative forcing of anthropogenic aerosols in E3SMv1: historical changes, causality, decomposition, and parameterization sensitivities

The effective radiative forcing of anthropogenic aerosols (ERF aer ) is an important measure of the anthropogenic aerosol effects simulated by a global climate model. Here we analyze ERF aer simulated by the E3SMv1 atmosphere model using both century-long free-running atmosphere-land simulations and short nudged simulations. We relate the simulated ERF aer to characteristics of the aerosol composition and optical properties, and evaluate the relationships between key aerosol and cloud properties. In terms of historical changes from the year 1870 to 2014, our results show that the global mean anthropogenic aerosol burden and optical depth increase during the simulation period as expected, but the regional averages show large differences in the temporal evolution. The largest regional differences are found in the emission-induced evolution of the burden and optical depth of the sulfate aerosol: a strong decreasing trend is seen in the Northern Hemisphere high-latitude region after around 1970, while a continued increase is simulated in the tropics. Consequently, although the global mean anthropogenic aerosol burden and optical depth increase from 1870 to 2014, the ERF aer magnitude does not increase after around year 1970. The relationships between key aerosol and cloud properties (relative changes between preindustrial and present-day conditions) also show evident changes after 1970, diverging from the linear relationships exhibited for the period from 1870 to 2014. The ERF aer in E3SMv1 is relatively large compared to the recently published multi-model estimates; the primary reason is the large indirect aerosol effect (i.e., through aerosol-cloud interactions). Compared to other models, E3SMv1 features a stronger sensitivity of the cloud droplet effective radius to changes in the cloud droplet number concentration. Large sensitivity is also seen in the liquid cloud optical depth, which is determined by changes in both the effective radius and liquid water path. Aerosol-induced changes in liquid and ice cloud properties in E3SMv1 are found to have a strong correlation, as the evolution of anthropogenic sulfate aerosols affects both the liquid cloud formation and the homogeneous ice nucleation in cirrus clouds. The ERF aer estimates in E3SMv1 for the shortwave and longwave components are sensitive to the parameterization changes in both liquid and ice cloud processes. When the parameterization of ice cloud processes is modified, the top-of-atmosphere forcing changes in the shortwave and longwave components largely offset each other, so the net effect is negligible. This suggests that, to reduce the magnitude of the net ERF aer , it would be more effective to reduce the anthropogenic aerosol effect through liquid or mixed-phase clouds.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Effective radiative forcing of anthropogenic aerosols in E3SM version 1: historical changes, causality, decomposition, and parameterization sensitivities

Abstract. The effective radiative forcing of anthropogenic aerosols (ERFaer) is an important measure of the anthropogenic aerosol effects simulated by a global climate model. Here we analyze ERFaer simulated by the E3SM version 1 (E3SMv1) atmospheric model using both century-long free-running atmosphere–land simulations and short nudged simulations. We relate the simulated ERFaer to characteristics of the aerosol composition and optical properties, and we evaluate the relationships between key aerosol and cloud properties. In terms of historical changes from the year 1870 to 2014, our results show that the global mean anthropogenic aerosol burden and optical depth increase during the simulation period as expected, but the regional averages show large differences in the temporal evolution. The largest regional differences are found in the emission-induced evolution of the burden and optical depth of the sulfate aerosol: a strong decreasing trend is seen in the Northern Hemisphere high-latitude region after around 1970, while a continued increase is simulated in the tropics. The relationships between key aerosol and cloud properties (relative changes between pre-industrial and present-day conditions) also show evident changes after 1970, diverging from the linear relationships exhibited for the period of 1870–1969. In addition to the regional differences in the simulated relationships, a reduced sensitivity in cloud droplet number and other cloud properties to aerosol perturbations is seen when the aerosol perturbation is large. Consequently, the global annual mean ERFaer magnitude does not increase after around 1970. The ERFaer in E3SMv1 is relatively large compared to the recently published multi-model estimates; the primary reason is the large indirect aerosol effect (i.e., through aerosol–cloud interactions). Compared to other models, E3SMv1 features large relative changes in the cloud droplet effective radius in response to aerosol perturbations. Large sensitivity is also seen in the liquid cloud optical depth, which is determined by changes in both the effective radius and liquid water path. Aerosol-induced changes in liquid and ice cloud properties in E3SMv1 are found to have a strong correlation, as the evolution of anthropogenic sulfate aerosols affects both the liquid cloud formation and the homogeneous ice nucleation in cirrus clouds (that causes a large effect on longwave ERFaer). As suggested by a previous study, the large ERFaer appears to be one of the reasons why the model cannot reproduce the observed global mean temperature evolution in the second half of the 20th century. Sensitivity simulations are performed to understand which parameterization and/or parameter changes have a large impact on the simulated ERFaer. The ERFaer estimates in E3SMv1 for the shortwave and longwave components are sensitive to the parameterization changes in both liquid and ice cloud processes. When the parameterization of ice cloud processes is modified, the top-of-model forcing changes in the shortwave and longwave components largely offset each other, so the net effect is negligible. This suggests that, to reduce the magnitude of the net ERFaer, it would be more effective to reduce the anthropogenic aerosol effect through liquid or mixed-phase clouds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Exploratory Precipitation Metrics: Spatiotemporal Characteristics, Process-Oriented, and Phenomena-Based

Abstract Precipitation sustains life and supports human activities, making its prediction one of the most societally relevant challenges in weather and climate modeling. Limitations in modeling precipitation underscore the need for diagnostics and metrics to evaluate precipitation in simulations and predictions. While routine use of basic metrics is important for documenting model skill, more sophisticated diagnostics and metrics aimed at connecting model biases to their sources and revealing precipitation characteristics relevant to how model precipitation is used are critical for improving models and their uses. This paper illustrates examples of exploratory diagnostics and metrics including 1) spatiotemporal characteristics metrics such as diurnal variability, probability of extremes, duration of dry spells, spectral characteristics, and spatiotemporal coherence of precipitation; 2) process-oriented metrics based on the rainfall–moisture coupling and temperature–water vapor environments of precipitation; and 3) phenomena-based metrics focusing on precipitation associated with weather phenomena including low pressure systems, mesoscale convective systems, frontal systems, and atmospheric rivers. Together, these diagnostics and metrics delineate the multifaceted and multiscale nature of precipitation, its relations with the environments, and its generation mechanisms. The metrics are applied to historical simulations from phases 5 and 6 of the Coupled Model Intercomparison Project. Models exhibit diverse skill as measured by the suite of metrics, with very few models consistently ranked as top or bottom performers compared to other models in multiple metrics. Analysis of model skill across metrics and models suggests possible relationships among subsets of metrics, motivating the need for more systematic analysis to understand model biases for informing model development.

54 ENVIRONMENTAL SCIENCES↗