Engineering Papers⌕ Search

Engineering topics

Xiao, Zhili

Publications and source records attributed to Xiao, Zhili.

Design and performance of parallel-channel nanocryotrons in magnetic fields

We introduce a design modification to conventional geometry of the cryogenic three-terminal switch, the nanocryotron (nTron). The conventional geometry of nTrons is modified by including parallel current-carrying channels, an approach aimed at enhancing the device's performance in magnetic field environments. The common challenge in nTron technology is to maintain efficient operation under varying magnetic field conditions. Here, we show that the adaptation of parallel channel configurations leads to an enhanced gate signal sensitivity, an increase in operational gain, and a reduction in the impact of superconducting vortices on nTron operation within magnetic fields up to 1 T. Contrary to traditional designs that are constrained by their effective channel width, the parallel nanowire channels permits larger nTron cross sections, further bolstering the device's magnetic field resilience while improving electro-thermal recovery times due to reduced local inductance. This advancement in nTron design not only augments its functionality in magnetic fields but also broadens its applicability in technological environments, offering a simple design alternative to existing nTron devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion-beam assisted sputtering of titanium nitride thin films

Abstract Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. This work aims to explore effects in ion beam-assisted sputtering (IBAS), were an observed increase in nominal critical temperature and upper critical fields are in tandem with previous work on Niobium nitride (NbN). We grow thin films of titanium nitride by both, the conventional method of DC reactive magnetron sputtering and the IBAS method, to compare their superconducting critical temperatures $$T_{c}$$ T c as functions of thickness, sheet resistance, and nitrogen flow rate. We perform electrical and structural characterizations by electric transport and x-ray diffraction measurements. Compared to the conventional method of reactive sputtering, the IBAS technique has demonstrated a 10% increase in nominal critical temperature without noticeable variation in the lattice structure. Additionally, we explore the behavior of superconducting $$T_c$$ T c in ultra-thin films. Trends in films grown at high nitrogen concentrations follow predictions of mean-field theory in disordered films and show suppression of superconducting $$T_c$$ T c due to geometric effects, while nitride films grown at low nitrogen concentrations strongly deviate from the theoretical models.

36 MATERIALS SCIENCE↗

Tunable Magnetically Induced Transparency Spectra in Magnon-Magnon Coupled Y 3 Fe 5 O 12 / Permalloy Bilayers

Hybrid magnonic systems host a variety of characteristic phenomena such as the magnetically induced transparency (MIT) and Purcell effect, which are considered useful for future coherent quantuminformation processing. In this work, we experimentally demonstrate a tunable MIT effect in the Y 3 Fe 5 O 12 (YIG)/Permalloy(Py) magnon-magnon coupled system via changing the magnetic field orientations. By probing the magneto-optic effects of Py and YIG thin films, we identify clear features of MIT spectra induced by the mode hybridization between the uniform mode of Py and the perpendicular standing spin-wave modes of YIG. By changing the external magnetic field orientations, we observe a tunable coupling strength between the YIG's spin-wave modes and the Py's uniform mode, upon the application of an out-of-plane magnetic field. This observation is theoretically interpreted by a geometrical consideration of the Py and YIG magnetization under the oblique magnetic field even at a constant interfacial exchange coupling. Finally, our findings show high promise for investigating tunable coherent phenomena with hybrid magnonic platforms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Platform Agnostic Streaming Data Application Performance Models

The mapping of computational needs onto execution resources is, by and large, a manual task, and users are frequently guided simply by intuition and past experiences. We present a queueing theory based performance model for streaming data applications that takes steps towards a better understanding of resource mapping decisions, thereby assisting application developers to make good mapping choices. The performance model (and associated cost model) are agnostic to the specific properties of the compute resource and application, simply characterizing them by their achievable data throughput. We illustrate the model with a pair of applications, one chosen from the field of computational biology and the second is a classic machine learning problem.

Faber, Clayton↗

Toward Evaluating High-Level Synthesis Portability and Performance between Intel and Xilinx FPGAs

Offloading computation from a CPU to a hardware accelerator is becoming a more common solution for improving performance because traditional gains enabled by Moore’s law and Dennard scaling have slowed. GPUs are often used as hardware accelerators, but field-programmable gate arrays (FPGAs) are gaining traction. FPGAs are beneficial because they allow hardware specific to a particular application to be created. However, they are notoriously difficult to program. To this end, two of the main FPGA manufacturers, Intel and Xilinx, have created tools and frameworks that enable the use of higher level languages to design FPGA hardware. Although Xilinx kernels can be designed by using C/C++, both Intel and Xilinx support the use of OpenCL C to architect FPGA hardware. However, not much is known about the portability and performance between these two device families other than the fact that it is theoretically possible to synthesize a kernel meant for Intel to Xilinx and vice versa.In this work, we evaluate the portability and performance of Intel and Xilinx kernels. We use OpenCL C implementations of a subset of the Rodinia benchmarking suite that were designed for an Intel FPGA and make the necessary modifications to create synthesizable OpenCL C kernels for a Xilinx FPGA. We find that the difficulty of porting certain kernel optimizations varies, depending on the construct. Once the minimum amount of modifications is made to create synthesizable hardware for the Xilinx platform, more nontrivial work is needed to improve performance. However, we find that constructs that are known to be performant for an FPGA should improve performance regardless of the platform; the difficulty comes in deciding how to invoke certain kernel optimizations while also abiding by the constraints enforced by a given platform’s hardware compiler.

Cabrera, Anthony↗

Ultrasonication-assisted trace amount solvent synthesis of Cs 4 PbBr 6 crystal with ultra-bright green light emission

Cs 4 PbBr 6 crystals have been synthesized by an ultrasonication-assisted trace amount polar solvent method. The prepared green Cs 4 PbBr 6 material was found to have high photoluminescence (PL) brightness and 10 ns PL lifetime. The prepared green light emitting device can achieve the maximum brightness of 3.8 × 10 9 cd/m 2 , which is nearly 100 times higher than a wick. The white light emitting device based on Cs 4 PbBr 6 crystals has better performance than commercial products, which can cover 32.3% of the color gamut and achieves 107.3% coverage for International Commission on Illumination (CIE)1931 and 84.8% coverage for CIE1976.

36 MATERIALS SCIENCE↗

Strong Coupling between Magnons and Microwave Photons in On-Chip Ferromagnet-Superconductor Thin-Film Devices

We show superconducting resonator. A coupling strength of 0.152 GHz and a cooperativity of 68 are found for a 30-nm-thick Permalloy stripe. The coupling strength is tunable by rotating the biasing magnetic field or changing the volume of Permalloy. We also observe an enhancement of magnon-photon coupling in the nonlinear regime of the superconducting resonator, which is attributed to the nucleation of dynamic flux vortices. Our results demonstrate a critical step towards future integrated hybrid systems for quantum magnonics and on-chip coherent information transfer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced isostructural phase transition and charge transfer in superconducting FeSe

Here, we present extensive investigations of the crystallographic phase diagram and electronic properties of the Fe-based superconductor FeSe under extreme conditions (high pressure (HP) and low temperature (LT)) by synchrotron X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS). An isostructural phase transition (Tetragonal (T) →high-pressure Tetragonal (T')) is discovered in FeSe at ~2.8 GPa based on the axial ratio c/a with finer pressure step as observed in Fe-As-based superconductor such as EuFe 2 As 2 . We also find a pressure-induced T' → MnP-type phase transition at 7.6 GPa in FeSe, which is consistent with the documented pressure-induced high-spin → low-spin transition (~6–7 GPa). These results reveal the pressure-induced structural phase transition sequence in FeSe at room temperature to be T → T' → T'+MnP-type at pressures of 0–10.6 GPa, enriching the crystallographic phase diagram. The HPLT XRD data also indicate that a sluggish structural phase transition ( Cmma → Pnma ) begins at 7.5 GPa, and these two phases coexist up to 26.5 GPa. The HP X-ray absorption near-edge spectroscopy (XANES) measurement shows that E o of Se experiences a pressure-induced shift to high energy, evidencing strongly charge transfer between Fe and Se under high pressure. Our results shed lights on the correlation between crystallographic/electronic structure and superconductivity in this material.

36 MATERIALS SCIENCE↗

Electrochemical Lithium Doping Induced Property Changes In Halide Perovskite CsPbBr 3 Crystal

Electrochemical doping was used to dope lithium into perovskite CsPbBr 3 crystal. Due to the doping, diamagnetic behavior was observed with a transition temperature ( T c ) of 7.17 K. Burstein-Moss effect related photoluminescence (PL) blue-shift was observed as long as 15 nm. UV-vis-NIR spectra indicate that the absorption has been enhanced. As a result, the doped CsPbBr 3 crystal generated 8 nA photocurrent, which is higher than the undoped CsPbBr 3 crystal.

36 MATERIALS SCIENCE↗

Sensors and devices containing ultra-small nanowire arrays

A network of nanowires may be used for a sensor. The nanowires are metallic, each nanowire has a thickness of at most 20 nm, and each nanowire has a width of at most 20 nm. The sensor may include nanowires comprising Pd, and the sensor may sense a change in hydrogen concentration from 0 to 100%. A device may include the hydrogen sensor, such as a vehicle, a fuel cell, a hydrogen storage tank, a facility for manufacturing steel, or a facility for refining petroleum products.

36 MATERIALS SCIENCE↗

A small signal amplifier based on ionic liquid gated black phosphorous field effect transistor

In this article we report an analog small signal amplifier based on semiconducting black phosphorus (BP), the most recent addition to the family of two dimensional crystals. The amplifier, consisting of a BP load resistor and a BP field effect transistor (FET) was integrated on a single flake. The gain of the amplifier was found to be ~9 and it remained undistorted for input signal frequencies up to 15 kHz. In addition, we also report record high ON current of 200 µA/µm at V DD = -0.5V in BP FETs. Our results demonstrates the possibility for the implementation of BP in the future generations of analog devices.

36 MATERIALS SCIENCE↗

Sensors and devices containing ultra-small nanowire arrays

A network of nanowires may be used for a sensor. The nanowires are metallic, each nanowire has a thickness of at most 20 nm, and each nanowire has a width of at most 20 nm. The sensor may include nanowires comprising Pd, and the sensor may sense a change in hydrogen concentration from 0 to 100%. A device may include the hydrogen sensor, such as a vehicle, a fuel cell, a hydrogen storage tank, a facility for manufacturing steel, or a facility for refining petroleum products.

47 OTHER INSTRUMENTATION↗

Synthesis and Properties of Nanostructured Exotic Superconductors (Final Report)

Superconductors are materials that conduct electricity with no resistance, i.e. no energy dissipation. In future electrically activated nanodevices, the use of superconducting interconnects is highly desirable, since it circumvents the damaging heat produced by energy dissipation in normal nano-conductors whose high resistance is inversely proportional to its cross-section area. Furthermore, the wave functions of the charge carriers - Cooper pairs will be strongly modified in a superconductor when they are squeezed into a small volume comparable to the coherence length or penetration depth. Thus, superconducting nanostructures provide unique platforms to investigate and discover novel superconducting phenomena in confined geometries. The objective of this DOE funded project was the development of novel approaches to synthesizing a new class of superconducting nanostructures such as nanowires and nanoribbons that are stable in atmosphere, enabling the exploration of superconducting properties and potential applications of individual nanostructures. We also pursued the modification of properties of the fabricated nanostructures by introducing artificial defects through nanoengineering. We developed a conversion approach comprised of two-steps to synthesize NbSe 2 and NbN nanowires/ribbons that were not achievable using other routes: first, we synthesized one-dimensional (1D) nanostructures of NbSe 3 and second, we converted these into desired 1D superconducting nanostructures of NbSe 2 and NbN by adjusting the composition of NbSe 3 nanostructure precursors while maintaining their shapes. Novel phenomena such as resistance oscillations with increasing magnetic fields were observed in both NbSe 2 and NbN nanowires/ribbons. By replacing the catalytic microparticles used in conventional whisker growth with the same kind of nanoparticles that are available now commercially, we improved whisker technologies for nanofabrication of high-T c superconductor nanowires/ribbons: we succeeded in the growth of Bi 2 Sr 2 CaCu 2 O 8+x (BSCCO-2212) and YBa 2 Cu 3 O 7-x (YBCO) nanowires and nanoribbons by annealing glassy precursors with alumina nanoparticles as growth sites. The high-quality whiskers enabled us to observe the ‘matching effect’ that represents itself as dips in the field dependence of the magnetoresistance and the influence of the periodic defects on the melting behavior of vortex matter. We also observed N-shaped V-I characteristics similar to those observed in semiconductor and plasma devices for the first time. Each nanofabrication technique has its advantages and drawbacks. For example, electron-beam lithography (EBL), in combination thin film deposition, has been widely used to fabricate nanowires (nanobridge) with well-defined cross-sections. However, electron-beam resist usually contaminates the sample up to a few hundred nanometers and hence degrades the quality of the entire nanowires if their widths are only a few hundred nanometers. We found that e-beam resist can degrade the superconducting critical temperature of a Nb nanowire from 9 K down to below 4 K if its width is less than 200 nm. We investigated the suitability of the various nanofabrication methods for achieving high-quality samples with desired properties. For example, we developed a novel way to achieve high quality Nb nanostrips with transverse dimensions of 150 nm or smaller. In the new process a superconducting bridge a few micrometers wide is fabricated with EBL. Subsequently, focused-ion-beam (FIB) is used to mill nano- 2 grooves to isolate an uncontaminated area of the microbridge to form a nanostrip. The high-quality superconducting Nb nanostrips with well-defined rectangular cross-sections fabricated using this new technique have enabled experimental confirmation of the theoretically predicted confinement-induced anisotropy effect on the magnetoresistance and critical field. We also found that FIB milling is more suitable than EBL in producing a pinning potential array with desired barrier between them into a MoGe film, which enabled us to realize the predicted vortex ices for the first time. By utilizing a filtration membrane as the substrate, we developed a new method to achieve networks of superconducting MoGe nanowires with transverse dimensions smaller than 10 nm. We observed superconducting confinement effect such as thermally activated phase slips and Little-Parks effect in these new samples. This research significantly advanced our knowledge on confined superconductors, in both their synthesis and physical properties. Though the new fabrication methods developed in this project aimed to achieve samples for studying new phenomena in confined superconductors, they can be utilized to obtain nanostructures of other functional materials. For example, we utilized the method developed to produce superconducting nanowire networks for the fabrication of networks of ultrasmall palladium (Pd) nanowires, which take advantage of single Pd nanowires while eliminating their nanofabrication obstacles, resulting in high-performance hydrogen sensors that are much more cost effective than those based on single Pd nanowires fabricated with lithography methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Unique Methodologies for Nano/Micro Manufacturing Job Training Via Desktop Supercomputer Modeling and Simulation

This project establishes an initiative in high speed (Teraflop)/large-memory desktop supercomputing for modeling and simulation of dynamic processes important for energy and industrial applications. It provides a training ground for employment of current students in an emerging field with skills necessary to access the large supercomputing systems now present at DOE laboratories. It also provides a foundation for NIU faculty to quantum leap beyond their current small cluster facilities. The funding extends faculty and student capability to a new level of analytic skills with concomitant publication avenues. The components of the Hewlett Packard computer obtained by the DOE funds create a hybrid combination of a Graphics Processing System (12 GPU/Teraflops) and a Beowulf CPU system (144 CPU), the first expandable via the NIU GAEA system to ~60 Teraflops integrated with a 720 CPU Beowulf system. The software is based on access to the NVIDIA/CUDA library and the ability through MATLAB multiple licenses to create additional local programs. A number of existing programs are being transferred to the CPU Beowulf Cluster. Since the expertise necessary to create the parallel processing applications has recently been obtained at NIU, this effort for software development is in an early stage. The educational program has been initiated via formal tutorials and classroom curricula designed for the coming year. Specifically, the cost focus was on hardware acquisitions and appointment of graduate students for a wide range of applications in engineering, physics and computer science.

Kimball, Clyde↗

Studying single nanocrystals under high pressure using an x-ray nanoprobe

In this report, we demonstrate the feasibility of applying a 250-nm focused x-ray beam to study a single crystalline NbSe{sub 3} nanobelt under high-pressure conditions in a diamond anvil cell. With such a small probe, we not only resolved the distribution and morphology of each individual nanobelt in the x-ray fluorescence maps but also obtained the diffraction patterns from individual crystalline nanobelts with thicknesses of less than 50 nm. Single crystalline diffraction measurements on NbSe{sub 3} nanobelts were performed at pressures up to 20 GPa.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Low‐Temperature Synthesis of Superconducting Nanocrystalline MgB 2

Magnesium diboride (MgB 2 ) is considered a promising material for practical application in superconducting devices, with a transition temperature near 40 K. In the present paper, nanocrystalline MgB 2 with an average particle size of approximately 70 nm is synthesized by reacting LiBH 4 with MgH 2 at temperatures as low as 450°C. This synthesis approach successfully bypasses the usage of either elemental boron or toxic diborane gas. The superconductivity of the nanostructures is confirmed by magnetization measurements, showing a superconducting critical temperature of 38.7 K.

Lu, Jun↗