Ex situ poly-DOL coatings for lithium metal protection
Schematic illustration of the poly-DOL coating layer developed through an ex situ method to improve lithium metal cycling performance in ether and carbonate electrolytes.
Zhao, Yifan↗
Engineering topics
Xiao, Xingcheng
Publications and source records attributed to Xiao, Xingcheng.
Composite interlayer for lithium metal based solid state batteries and the method of making the same
A solid-state electrochemical cell that cycles lithium ions includes a solid-state electrolyte that defines a first major surface and an electrode that defines a second major surface. The solid-state electrochemical cell also includes an interfacial layer disposed between the first major surface of the solid-state electrolyte and the second major surface of the electrode. The interfacial layer may include an ion-conductor disposed in an organic matrix.
Chen, Mengyuan↗
Fundamental Understanding of Dynamic Interfacial Phenomena in Solid State Batteries
Solid-state batteries (SSBs) are considered as one of the most promising battery technologies for resolving the intrinsic limitations of current lithium-ion batteries, such as safety and insufficient energy density. However, the degradation associated with interfaces in SSBs is still a critical issue leading to short cycle life. To get fundamental understanding of the failure mechanism of the interfaces, we first developed a comprehensive set of in situ diagnostic techniques combined with atomic/continuum modeling schemes to investigate and understand the coupled mechanical/chemical degradation associated with dynamic interfacial phenomena in SSBs. Specifically, we focused on in situ observations and characterizations of lithium plating-stripping processes, lithium dendrite formation, interphase formation, and the induced interfacial stresses, as well as the mechanical and electrochemical properties of interfaces and interphases. The final project report first gives an overview of the project background, objectives, technical approaches, and final deliverables for all the budget periods; then follows with a summary on main accomplishments based on main tasks. We particularly would like to highlight some capabilities developed from this project which can also be implemented to our advanced battery development.
25 ENERGY STORAGE↗
Lithium metal negative electrode and method of manufacturing the same
A negative electrode for an electrochemical cell of a secondary lithium metal battery is manufactured by a method in which a precursor solution is applied to a major surface of a lithium metal substrate to form a precursor coating thereon. The precursor solution includes an organophosphate, a nonpolar organic solvent, and a lithium-containing inorganic ionic compound dissolved therein. At least a portion of the nonpolar organic solvent is removed from the precursor coating to form a protective interfacial layer on the major surface of the lithium metal substrate. The protective interfacial layer exhibits a composite structure including a carbon-based matrix component and a lithium-containing dispersed component. The lithium-containing dispersed component is embedded in the carbon-based matrix component and includes a plurality of lithium-containing inorganic ionic compounds, e.g., lithium phosphate (Li3PO4) and lithium nitrate (LiNO3).
Xiao, Xingcheng↗
In-situ polymerization to protect lithium metal electrodes
An electrode including an electrode active material including lithium (Li) and a polymer layer coating at least a portion of the electrode active material is provided. The polymer layer includes a polymerization product of a monomer having Formula I: where R1 and R2 are independently an aryl or a branched or unbranched C1-C10 alkyl and X1 and X2 are independently chlorine (Cl), bromine (Br), or iodine (I).
Li, Binsong↗
Protective coatings for lithium metal electrodes
Double-layered protective coatings for lithium metal electrodes, as well as methods of formation relating thereto, are provided. The negative electrode assembly includes an electroactive material layer including lithium metal and a protective dual-layered coating. The protective dual-layered coating includes a polymeric layer disposed on a surface of the electroactive material layer and an inorganic layer disposed on an exposed surface of the polymeric layer. The polymeric layer has an elastic modulus of greater than or equal to about 0.01 GPa to less than or equal to about 410 GPa. The inorganic layer has an elastic modulus of greater than or equal to about 10 GPa to less than or equal to about 1000 GPa.
Xiao, Xingcheng↗
Observation of the surface layer of lithium metal using in situ spectroscopy
In this work, we have investigated the surface of lithium metal using x-ray photoemission spectroscopy and optical spectroscopic ellipsometry. Even if we prepare the surface of lithium metal rigorously by chemical cleaning and mechanical polishing inside a glovebox, both spectroscopic investigations show the existence of a few tens of nanometer-thick surface layers, consisting of lithium oxides and lithium carbonates. When lithium metal is exposed to room air (~50% moisture), in situ real-time monitoring of optical spectra indicates that the surface layer grows at a rate of approximately 24 nm/min, presumably driven by an interface-controlled process. Our results hint that surface-layer-free lithium metals are formidable to achieve by a simple cleaning/polishing method, suggesting that the initial interface between lithium metal electrodes and solid-state electrolytes in fabricated lithium metal batteries can differ from an ideal lithium/electrolyte contact.
36 MATERIALS SCIENCE↗
An Investigation of Chemo-Mechanical Phenomena and Li Metal Penetration in All-Solid-State Lithium Metal Batteries Using In Situ Optical Curvature Measurements
Solid-electrolytes (SEs) can provide a pathway to increase energy-density in lithium metal batteries. However, lithium metal penetration through garnet based LLZO solid electrolytes has been identified as a critical failure process. This phenomenon is related to chemo-mechanical processes which are difficult to probe. In particular, characterizing the dynamic mechanical deformations that occur in electrode-SE structures is very challenging. Here study reports in situ curvature measurements that are thus designed to probe chemo-mechanical phenomena that occur during lithium plating. The novel experimental cell configuration created for this work shows that pressure builds up in the Li metal during plating, up until the point where short circuits occur. The resulting data are analyzed with a detailed finite element model (FEM) to quantitatively evaluate stress evolution. The results show that Li metal plating within a surface flaw can produce stress build-up prior to short-circuiting. The combined results from both the experiments and the FEM suggest that it is critical to minimize surface defects and flaws during the manufacturing processes.
25 ENERGY STORAGE↗
Methods for manufacturing electrodes including fluoropolymer-based solid electrolyte interface layers
Methods for manufacturing electrodes include applying a fluoropolymer film to a lithium-based host material, defluorinating the fluoropolymer film by heating to produce a lithium electrode having a solid electrolyte interface (SEI) layer including defluorinated fluoropolymers and at least about 5 wt. % LiF. The fluoropolymers can include one or more of fluorinated ethylenepropylene, perfluoroalkoxy alkanes, vinylidenefluoride, and copolymers of perfluoromethylvinylether and tetrafluoroethylene. The fluoropolymers can include one or more fluorinated monomers, including hexafluoropropylene, tetrafluoroethylene, ethylene-tetrafluoroethylene, perfluoroethers, and vinylidene fluoride. The —CF 3 functional groups of the defluorinated fluoropolymers can be about 3 wt. % to about 10 wt. % of the SEI layer. The SEI layer can include about 30 wt. % to about 50 wt. % LiF. The method can include assembling a battery cell by disposing a battery separator between a cathode and the electrode, and disposing the battery separator, the cathode, and the electrode in an electrolyte.
Xiao, Xingcheng↗
Protective coating for lithium-containing electrode and methods of making the same
A lithium-containing electrode with a protective coating and lithium-containing electrochemical cells including the same are provided herein. The protective coating has a first layer including a first fluoropolymeric matrix and Li—F compounds and a second layer including a second fluoropolymeric matrix. Methods of preparing the protective coating on the lithium-containing electrode by applying a first fluoropolymer and/or a first fluoropolymer precursor and a second fluoropolymer and/or a second fluoropolymer precursor are also provided herein.
Xiao, Xingcheng↗