Engineering Papers⌕ Search

Engineering topics

Xiao, Guoliang

Publications and source records attributed to Xiao, Guoliang.

At least 19 records

Ni modified ceramic anodes for direct-methane solid oxide fuel cells

In accordance with certain embodiments of the present disclosure, a method for fabricating a solid oxide fuel cell is described. The method includes synthesizing a composition having a perovskite present therein. The method further includes applying the composition on an electrolyte support to form an anode and applying Ni to the composition on the anode.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Theoretical Investigation of H₂ Oxidation on the Sr 2 Fe 1.5 Mo 0.5 O 6 (001) Perovskite Surface Under Anodic Solid Oxide Fuel Cell Conditions

Periodic density functional theory (DFT) calculations and microkinetic modeling are used to investigate the electrochemical oxidation of H₂ fuel on the (001) surface of Sr 2 Fe 1.5 Mo 0.5 O 6 (SFMO) perovskite under anodic solid oxide fuel cell conditions. Three surface models with different Fe/Mo ratios in the topmost layer-identified by ab initio thermodynamic analysis-are used to investigate the H₂ oxidation mechanism. A microkinetic analysis that considers the effects of anode bias potential suggests that a higher Mo concentration in the surface increases the activity of the surface toward H₂ oxidation. At operating voltage and anodic SOFC conditions, the model predicts that water desorption is rate-controlling and that stabilizing the oxygen vacancy structure increases the overall rate for H₂ oxidation. Although we find that Mo plays a crucial role in improving catalytic activity of SFMO, under fuel cell operating conditions, the Mo content in the surface layer tends to be very low. On the basis of these results and in agreement with previous experimental observations, a strategy for improving the overall electrochemical performance of SFMO is increasing the Mo content or adding small amounts of an active transition metal, such as Ni, to the surface to lower the oxygen vacancy formation energy of the SFMO surface.

Environmental Molecular Sciences Laboratory↗

Obtaining Mixed Ionic/Electronic Conductivity in Perovskite Oxides in a Reducing Environment: A Computational Prediction for Doped SrTiO3

The electronic conductivity and thermodynamic stability of mixed p- and n-doped SrTiO3 perovskites have been investigated under anodic solid oxide fuel cell conditions using density functional theory (DFT). In particular, constrained ab initio thermodynamic calculations have been performed to evaluate the phase stability of various Ga- and La-doped SrTiO3 at synthesized and anodic SOFC conditions. The density of states (DOS) of these materials was analyzed to determine the number of charge carriers and the degree of electronic conductivity. We find that a mixed ionic/electronic conductor can be obtained when doping SrTiO3 perovskite oxide with both p-type and n-type dopants. Calculations show that 10% Ga- and 20% La-doped SrTiO3 exhibit mixed ionic/electronic conductivity at high temperature and low oxygen partial pressure whereas doping with higher concentrations of Ga, e.g., 20%, diminishes the electronic conductivity of the material. Furthermore, changing the n-dopant from La (A-site) to Nb (B-site) does not significantly affect the reducibility and number of charge carriers in p- and n-doped SrTiO3. However, a higher degree of oxygen vacancy clustering is observed for the La-doped material which reduces the oxygen ion diffusion rate and traps electrons. Nevertheless, our findings suggest that independent of doping site, mixed ionic/ electronic conductivity can be obtained in SrTiO3 perovskite oxides under reducing conditions and high temperatures when using a mixed p- and n-type doping strategy that uses a p-dopant concentration smaller than the n-dopant concentration.

Environmental Molecular Sciences Laboratory↗

Synthesis and characterization of Mo-doped SrFeO 3-δ as cathode materials for solid oxide fuel cells

This paper demonstrates the potential application of Mo-doped SrFeO 3-δ perovskites as new cathode materials for solid oxide fuel cells (SOFCs). SrFe 1-x MoxO 3-δ (x = 0, 0.05, 0.1, 0.2 and 0.25) perovskite materials have been synthesized by a microwave-assisted combustion method. By doping with Mo, the electrical conductivity of the doped SrFeO 3-δ in air is reduced with increasing amounts of Mo. At 800 °C, the conductivity drops from about 62 to 22 S cm -1 when the doping level is increased to 25%. According to X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) results, a decrease in the concentration of charge carrier Fe 4+ ions may account for the decrease in electrical conductivity. In contrast, the resistance to sintering and tolerance to reduction of SrFeO 3-δ are improved by Mo-doping. Additionally, the thermal expansion coefficient at 800 °C drops from 40.8 × 10 -6 K -1 for SrFeO 3-δ to 25.7 × 10 -6 K -1 for SrFe 0.8 Mo 0.2 O 3-δ and 20.9 × 10 -6 K -1 for SrFe0.75Mo0.25O 3-δ . This significant decrease in the thermal expansion coefficient makes Mo-doped SrFeO 3-δ materials attractive as cathode candidates for SOFCs. Finally, a relatively low polarization resistance of 0.074 Ω cm2 is obtained for SrFe 0.8 Mo 0.2 O 3-δ at 800 °C in air.

25 ENERGY STORAGE↗

Sr 2 Fe 1.5 Mo 0.5 O 6-δ as a regenerative anode for solid oxide fuel cells

Sr 2 Fe 1.5 Mo 0.5 O 6-δ (SFM) was prepared using a microwave-assisted combustion synthesis method. Rietveld refinement of powder X-ray diffraction data reveals that SFM crystallizes in the simple cubic perovskite structure with iron and molybdenum disordered on the B-site. No structure transition was observed by variable temperature powder X-ray diffraction measurements in the temperature range of 25–800 °C. XPS results show that the iron and molybdenum valences change with an increase in temperature, where the mixed oxidation states of both iron and molybdenum are believed to be responsible for the increase in the electrical conductivity with increasing temperature. SFM exhibits excellent redox stability and has been used as both anode and cathode for solid oxide fuel cells. Presence of sulfur species in the fuel or direct utilization of hydrocarbon fuel can result in loss of activity, however, as shown in this paper, the anode performance can be regenerated from sulfur poisoning or coking by treating the anode in an oxidizing atmosphere. Thus, SFM can be used as a regenerating anode for direct oxidation of sulfur-containing hydrocarbon fuels.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterizations of A-site deficient perovskite Sr0.9Ti0.8-xGaxNb0.2O3

The effects of reduction and Ga-doping on the physicochemical properties of A-site deficient perovskites Sr0.9Ti0.8-xGaxNb0.2O3 (x = 0, 0.05, 0.1, 0.15 and 0.2) are reported. With 10% Ga doping, the sample sintered in air and treated at 1400 °C in H2 atmosphere exhibits the highest electrical conductivity. It is found that the Ga-doping lowers the sinterability but promotes the reduction of Sr0.9Ti0.8-xGaxNb0.2O3. The XRD analysis on the reduced samples suggests that some cations are reduced during the treatment. However, without high temperature pre-reduction, the improvement of Ga-doping is limited and the overall cell performance using Sr0.9Ti0.8-xGaxNb0.2O3 as an anode without catalysts is still relatively low.

36 MATERIALS SCIENCE↗