Engineering topics
Publications and source records attributed to Wychgram, D. C..
The author has identified the following significant results. A reasonably good agreement was found for the radiometric temperatures calculated from the ground truth data and the radiometric temperatures measured by the S192 scanner. This study showed that the S192 scanner data could be used to create good thermal images, particularly with the x-5 detector array.
A radar mapping mission to Venus is under consideration by NASA for the 1980s. The science objectives of the mission are to determine the geologic history of the planet; map the major topographic features and provide limited detailed geologic and terrain analysis of potential probe landing sites. Because of the thick Venusian atmosphere, a synthetic-aperture side-looking radar system has been selected as the most practical remote sensing instruments to use. Topographic data are the most useful for achieving the science goals of the mission. The radar system variables and mission parameters must be specified to maximize topographic data returns while being compatible with engineering and cost restraints. A baseline imaging resolution of 100 meters, with ability to obtain some higher-resolution coverage, is acceptable. Total planet coverage is desirable but the primary science objectives can be achieved if at least one entire hemisphere is imaged.
Remote sensor data from a NASA Convair 990 radar flight and Mission 101 and 105 have been interpreted and evaluated. Based on interpretation of the remote sensor data, a geologic map has been prepared and compared with a second geologic map, prepared from interpretation of both remote sensor data and field data. Comparison of the two maps gives one indication of the usefulness and reliability of the remote sensor data. Color and color infrared photography provided the largest amount of valuable information. Multiband photography was of lesser value and side-looking radar imagery provided no new information that was not available on small scale photography. Thermal scanner imagery proved to be a very specialized remote sensing tool that should be applied to areas of low relief and sparse vegetation where geologic features produce known or suspected thermal contrast. Low sun angle photography may be a good alternative to side-looking radar imagery but must be flown with critical timing.