Unconventional Wells Interference: Supervised Machine Learning for Detecting Fracture Hits
Invited guest speaker presentation at the 5th Annual Appalachian Basin Geophysical Symposium, June 4th, 2024, Pittsburgh, PA
Engineering topics
Publications and source records attributed to Wu, Xiongjun.
Invited guest speaker presentation at the 5th Annual Appalachian Basin Geophysical Symposium, June 4th, 2024, Pittsburgh, PA
The primary objective of the study was development of a machine learning (ML)-based workflow for fracture hit (“frac hit”) detection and monitoring using shale oil-field data such as drilling surveys, production history (oil and produced water), pressure, and fracking start time and duration records. The ML method takes advantage of long short-term memory (LSTM) and multilayer perceptron (MLP) neural networks to identify the frac hits due to hydraulic communication between the fracking child well(s) and the producing parent well(s) within the same pad (intra-pad interaction) and/or on different pads (inter-pad interaction). It utilizes time series of pressure and production data from within a pad and from adjacent pads. The workflow can capture time variable features of frac hits when the model architecture is deep and wide enough, with enough trainable parameters for deep learning and feature extraction, as demonstrated in this paper by using training and testing subsets of the field data from selected neighboring pads with over a couple of hundred wells. The study was focused on frac-hit interaction among paired wells and demonstrated that the ML model, once trained, can predict the frac-hit probability.
The poster presents the work conducted under SMART focusing on using insight-centric approach to design a meaningful proxy for machine learning. Domain insights are critical not just in understanding the prediction results but also in designing the model. This study demonstrated that a single meaningful scaler (as an extreme case) can effectively replace full-size 3D geologic properties. The model's accuracies are on par with other models, and it is the fastest model to predict all test cases, 5,000 times faster than traditional simulations.
This work was focused on developing novel methods to facilitate rapid data to knowledge transformation for subsurface applications, particularly those related to unconventional oil and gas.
16th International Conference on Greenhouse Gas Technologies (GHGT-16), Lyon, France, October 23-27, 2022
16th International Conference on Greenhouse Gas Technologies (GHGT-16), Lyon, France, October 23-27, 2022
This study focusses on the development of an ML-based workflow that can be used for frac-hit identification and monitoring based on the readily available field data, such as drilling surveys, pressure records, production history (oil and water production measurements), and fracking time and duration information, etc.
International Meeting for Applied Geoscience & Energy (IMAGE '22), Houston, TX, August 28-September 1, 2022
2022 Carbon Management Project Review Meeting, Pittsburgh, PA, August 15-19, 2022
2022 Carbon Management Project Review Meeting, Pittsburgh, PA, August 15-19, 2022
AGU 2021 Fall Meeting, Virtual, December 13-17, 2021.
The objective of this work is to provide a valuable database from controlled experiments for validating computational models. Recently, coarse-grained techniques such as particle-in-cell (PIC) or coarse-grained discrete element modeling (DEM) have gained popularity due to their computational efficiency while modeling large-scale systems; however, the influence of model parameters and their sensitivities at different geometric scales and flow conditions remain to be analyzed. These datasets are critical for the multiphase flow research community to assess predictive capability of modeling techniques as well as elucidate the hydrodynamic behavior in these systems. This study performed fluidization experiments using three different test sections with internal diameters of 2.5, 4, and 6 in. The operating conditions, bed material, and range of flow velocities at the inlet were constant in all the units, which were not hydrodynamically scaled. Glass beads having a Sauter Mean Diameter of 332 μm were used. Superficial velocity was varied from 2.97 to 5.35 times the minimum fluidization velocity and the initial static bed height was 0.1524 m. The order in which the experiments were performed was randomized and replicates were included to provide uncertainty in measurements. Statistics of differential pressure and bed height from these tests were reported. Future plans include validating PIC methodology in the open-source software, MFiX (Multiphase Flow with Interphase Exchanges) using results from this study. This could further be extended to determine optimal model parameters using inverse techniques such as deterministic calibration or Bayesian inference.
The objective of this work is to provide a valuable database from controlled experiments for validating computational models. Recently, coarse-grained techniques such as particle-in-cell (PIC) or coarse-grained discrete element modeling (DEM) have gained popularity due to their computational efficiency while modeling large-scale systems; however, the influence of model parameters and their sensitivities at different geometric scales and flow conditions remain to be analyzed. These datasets are critical for the multiphase flow research community to assess predictive capability of modeling techniques as well as elucidate the hydrodynamic behavior in these systems. This study performed fluidization experiments using three different test sections with internal diameters of 2.5, 4, and 6 in. The operating conditions, bed material, and range of flow velocities at the inlet were constant in all the units, which were not hydrodynamically scaled. Glass beads having a Sauter Mean Diameter of 332 μm were used. Superficial velocity was varied from 2.97 to 5.35 times the minimum fluidization velocity and the initial static bed height was 0.1524 m. The order in which the experiments were performed was randomized and replicates were included to provide uncertainty in measurements. Statistics of differential pressure and bed height from these tests were reported. Future plans include validating PIC methodology in the open-source software, MFiX (Multiphase Flow with Interphase Exchanges) using results from this study. This could further be extended to determine optimal model parameters using inverse techniques such as deterministic calibration or Bayesian inference.
Explore the source record for details and available documents.