Engineering Papers⌕ Search

Engineering topics

Wu, Di

Publications and source records attributed to Wu, Di.

249 records · Page 14

Impacts of Microphysical Scheme on Convective and Stratiform Characteristics in Two High Precipitation Squall Line Events

This study investigates the impact of snow, graupel, and hail processes on simulated squall lines over the Southern Great Plains in the United States. The Weather Research and Forecasting (WRF) model is used to simulate two squall line events in Oklahoma during May 2007, and the simulations are validated against radar and surface observations. Several microphysics schemes are tested in this study, including the WRF 5-Class Microphysics (WSM5), WRF 6-Class Microphysics (WSM6), Goddard Cumulus Ensemble (GCE) Three Ice (3-ice) with graupel, Goddard Two Ice (2-ice), and Goddard 3-ice hail schemes. Simulated surface precipitation is sensitive to the microphysics scheme when the graupel or hail categories are included. All of the 3-ice schemes overestimate the total precipitation with WSM6 having the largest bias. The 2-ice schemes, without a graupel/hail category, produce less total precipitation than the 3-ice schemes. By applying a radar-based convective/stratiform partitioning algorithm, we find that including graupel/hail processes increases the convective areal coverage, precipitation intensity, updraft, and downdraft intensities, and reduces the stratiform areal coverage and precipitation intensity. For vertical structures, simulations have higher reflectivity values distributed aloft than the observed values in both the convective and stratiform regions. Three-ice schemes produce more high reflectivity values in convective regions, while 2-ice schemes produce more high reflectivity values in stratiform regions. In addition, this study has demonstrated that the radar-based convective/stratiform partitioning algorithm can reasonably identify WRF-simulated precipitation, wind, and microphysical fields in both convective and stratiform regions.

snow↗

Parallel Implementation of Power System Dynamic Simulation

Dynamic simulation of power system transient stability is important for planning, monitoring, operation, and control of electrical power systems. However, modeling the system dynamics and network involves the computationally intensive time-domain solution of numerous differential and algebraic equations (DAE). This results in a transient stability implementation that may not maintain the real-time constraints of an online security assessment. This paper presents a parallel implementation of the dynamic simulation on a high-performance computing (HPC) platform using parallel simulation algorithms and computation architectures. It enables the simulation to run even faster than real time, enabling the “look-ahead” capability of upcoming stability problems in the power grid.

dynamic simulation↗

Preparation and visible-light photocatalytic properties of BiNbO₄ and BiTaO₄ by a citrate method

Visible-light photcatalysts of BiNbO₄ and BiTaO₄ powders have been successfully synthesized by a citrate method. The formation of pure triclinic phase of BiNbO₄ and BiTaO₄ at low temperature of 700 °C can be attributed to the advantage of the citrate method. The photocatalytic activity and possible mechanism were investigated deeply. For BiNbO₄ particles, the mechanism of methyl violet (MV) degradation under visible light irradiation involves photocatalytic and photosensitization pathways and the catalyst specific surface area has dominant influence. While for BiTaO₄ particles, the dominant mechanism arises from photosensitization pathways and a trade off between high specific surface area and good crystallinity is achieved. BiNbO₄ powder calcined at 700 °C shows the best photocatalytic efficiency among these catalysts, which is ascribed to its large surface area and more positive conduction band level. The optimal catalyst loading, additive H₂O₂ concentration and pH value is around 1 g/L, 2 mmol/L and 8 mmol/L, respectively. - Graphical abstract: Photodegradation performance and adsorption ability of BiNbO₄ and BiTaO₄ powders, respectively. BNO700 with the best photocatalytic efficiency is ascribed to its large surface area and more positive conduction band level. Highlights: • Pure BiNbO₄ and BiTaO₄ powders were prepared by a citrate method. • Excellent performance of visible-light degradation of MV was observed. • Different MV degradation mechanism for BiNbO₄ and BiTaO₄ powders was proposed. • BNO700 has large surface area and more positive conduction band level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A conserved serine residue regulates the stability of Drosophila Salvador and human WW domain-containing adaptor 45 through proteasomal degradation

Highlights: •Ser-17 is key for the stability of Drosophila Sav. •Ala mutation of Ser-17 promotes the proteasomal degradation of Sav. •Ser-17 residue is not the main target of Hpo-induced Sav stabilization. •Hpo-dependent and -independent mechanisms regulate Sav stability. •This mechanism is conserved in the homologue of Sav, human WW45. -- Abstract: The Hippo (Hpo) pathway is a conserved tumor suppressor pathway that controls organ size through the coordinated regulation of apoptosis and proliferation. Drosophila Salvador (Sav), which limits organ size, is a core component of the Hpo pathway. In this study, Ser-17 was shown to be important for the stability of Sav. Alanine mutation of Ser-17 promoted the proteasomal degradation of Sav. Destabilization and stabilization of the Sav protein mediated by alanine mutation of Ser-17 and by Hpo, respectively, were independent of each other. This implies that the stability of Sav is controlled by two mechanisms, one that is Ser-17-dependent and Hpo-independent, and another that is Ser-17-independent and Hpo-dependent. These dual mechanisms also regulated the human counterpart of Drosophila Sav, WW domain-containing adaptor 45 (WW45). The conservation of this regulation adds to its significance in normal physiology and tumorigenesis.

60 APPLIED LIFE SCIENCES↗

Analysis of ISO NE Balancing Requirements: Uncertainty-based Secure Ranges for ISO New England Dynamic Inerchange Adjustments

The document describes detailed uncertainty quantification (UQ) methodology developed by PNNL to estimate secure ranges of potential dynamic intra-hour interchange adjustments in the ISO-NE system and provides description of the dynamic interchange adjustment (DINA) tool developed under the same contract. The overall system ramping up and down capability, spinning reserve requirements, interchange schedules, load variations and uncertainties from various sources that are relevant to the ISO-NE system are incorporated into the methodology and the tool. The DINA tool has been tested by PNNL and ISO-NE staff engineers using ISO-NE data.

Etingov, Pavel V.↗

Diurnal Variation of Precipitation During MC3E Campaign

The diurnal variation of precipitation processes in the United States (US) is well recognized but incompletely understood (Cabone et al. 2002). The diurnal cycle of precipitation has been studied using surface rainfall data, radar reflectivity data, and satellite-derived cloudiness and precipitation (Wallace 1975; Dai et al. 1999; Carbone et al. 2002; Carbone and Tuttle, 2008; Parker and Ahijevych, 2007; Matsui et al. 2010 and others). These observations indicate that the summer-time precipitation most of the North America and typically feature late-afternoon precipitation maxima. These diurnal variation of precipitation can also be generally categorized into three different types: 1) afternoon rainfall maxima due to mesoscale and local circulations over the south and east of the Mississippi and Ohio valleys, 2) nocturnal rainfall maxima from eastward-propagating mesoscale convective systems (MCSs) over the Lee side of Rocky Mountain regions and 3) afternoon rainfall maxima in the Appalachian Mountains, and then propagate eastward toward the coast. The main objective of this paper is to use a regional cloud-scale model with very high-resolution (i.e., WRF) to examine the WRF ability to simulate diurnal variation of precipitation. Specifically, the study will (1) identify the physical processes responsible to diurnal variation of precipitation, (2) examine the sensitivity of resolution (2, 6, 18, and 30 km) to model simulated diurnal variation of precipitation and (3) identify the relationships between microphysics and cumulus parameterization schemes.

Tao, Wei-Kuo↗

Use NU-WRF and GCE Model to Simulate the Precipitation Processes During MC3E Campaign

One of major CRM approaches to studying precipitation processes is sometimes referred to as "cloud ensemble modeling". This approach allows many clouds of various sizes and stages of their lifecycles to be present at any given simulation time. Large-scale effects derived from observations are imposed into CRMs as forcing, and cyclic lateral boundaries are used. The advantage of this approach is that model results in terms of rainfall and QI and Q2 usually are in good agreement with observations. In addition, the model results provide cloud statistics that represent different types of clouds/cloud systems during their lifetime (life cycle). The large-scale forcing derived from MC3EI will be used to drive GCE model simulations. The model-simulated results will be compared with observations from MC3E. These GCE model-simulated datasets are especially valuable for LH algorithm developers. In addition, the regional scale model with very high-resolution, NASA Unified WRF is also used to real time forecast during the MC3E campaign to ensure that the precipitation and other meteorological forecasts are available to the flight planning team and to interpret the forecast results in terms of proposed flight scenarios. Post Mission simulations are conducted to examine the sensitivity of initial and lateral boundary conditions to cloud and precipitation processes and rainfall. We will compare model results in terms of precipitation and surface rainfall using GCE model and NU-WRF

Tao, Wei-Kuo↗

Allele-Specific Deletions in Mouse Tumors Identify Fbxw7 as Germline Modifier of Tumor Susceptibility

Genome-wide association studies (GWAS) have been successful in finding associations between specific genetic variants and cancer susceptibility in human populations. These studies have identified a range of highly statistically significant associations between single nucleotide polymorphisms (SNPs) and susceptibility to development of a range of human tumors. However, the effect of each SNP in isolation is very small, and all of the SNPs combined only account for a relatively minor proportion of the total genetic risk (5–10%). There is therefore a major requirement for alternative routes to the discovery of genetic risk factors for cancer. We have previously shown using mouse models that chromosomal regions harboring susceptibility genes identified by linkage analysis frequently exhibit allele-specific genetic alterations in tumors. We demonstrate here that the Fbxw7 gene, a commonly mutated gene in a wide range of mouse and human cancers, shows allele-specific deletions in mouse lymphomas and skin tumors. Lymphomas from three different F1 hybrids show 100% allele-specificity in the patterns of allelic loss. Parental alleles from 129/Sv or Spretus/Gla mice are lost in tumors from F1 hybrids with C57BL/6 animals, due to the presence of a specific non-synonymous coding sequence polymorphism at the N-terminal portion of the gene. A specific genetic test of association between this SNP and lymphoma susceptibility in interspecific backcross mice showed a significant linkage (p = 0.001), but only in animals with a functional p53 gene. These data therefore identify Fbxw7 as a p53-dependent tumor susceptibility gene. Increased p53-dependent tumor susceptibility and allele-specific losses were also seen in a mouse skin model of skin tumor development. We propose that analysis of preferential allelic imbalances in tumors may provide an efficient means of uncovering genetic variants that affect mouse and human tumor susceptibility.

59 BASIC BIOLOGICAL SCIENCES↗

A calibrated Monte Carlo approach to quantify the impacts of misorientation and different driving forces on texture development

A calibrated Monte Carlo (cMC) approach, which quantifies grain boundary kinetics within a generic setting, is presented. The influence of misorientation is captured by adding a scaling coefficient in the spin flipping probability equation, while the contribution of different driving forces is weighted using a partition function. The calibration process relies on the established parametric links between Monte Carlo (MC) and sharp-interface models. The cMC algorithm quantifies microstructural evolution under complex thermomechanical environments and remedies some of the difficulties associated with conventional MC models. After validation, the cMC approach is applied to quantify the texture development of polycrystalline materials with influences of misorientation and inhomogeneous bulk energy across grain boundaries. The results are in good agreement with theory and experiments.

99 GENERAL AND MISCELLANEOUS↗

New 4,5-dichlorophthalhydrazidate-bridged chained coordination polymers

The hydrothermal self-assemblies of Pb{sup 2+}/Cd{sup 2+} salt, 4,5-dichlorophthalic acid (dcpha), N{sub 2}H{sub 4}.H{sub 2}O together with 1,10-phenanthroline.H{sub 2}O (phen) or 2,2'-bipyridine (bpy) generated two new monoacylhydrazidate-bridged 1-D chained coordination polymers [Pb{sub 2}(DCPTH){sub 4}(phen){sub 2}] 1 and [Cd{sub 3}(DCPTH){sub 2}(dcph){sub 2}(bpy){sub 2}] 2 (DCPTH=4,5-dichlorophthalhydrazidate, dcph=4,5-dichlorophthalate). The monoacylhydrazidate ligand DCPTH originated from the hydrothermal in situ acylation reaction between dcpha and N{sub 2}H{sub 4}.H{sub 2}O. In compound 1, two types of coordination modes for DCPTH are found, which link alternately the Pb(II) centers into a 1-D chain structure of compound 1 with ancillary phen molecules. In compound 2, DCPTH and dcph as the mixed bridges extend the Cd(II) centers into a 1-D chain structure of compound 2 with auxiliary bpy molecules. DCPTH in compound 2 shows a different coordination mode from those observed in compound 1. -- Graphical abstract: By applying the in situ acylation reaction between 4,5-diclorophthalic acid and N{sub 2}H{sub 4}.H{sub 2}O, two 4,5-dichlorophthalhydrazidate-bridged chained compounds [Pb{sub 2}(DCPTH){sub 4}(phen){sub 2}] and [Cd{sub 3}(DCPTH){sub 2}(dcph){sub 2}(bpy){sub 2}] (4,5-dichlorophthalhydrazidate=DCPTH, and dcph=4,5-dichlorophthalate) were hydrothermally synthesized. Display Omitted Research highlights: > In this article, we first reported the preparations and structural characterization of two examples of 4,5-dichlorophthalhydrazidate-bridged chained coordination polymers [Pb{sub 2}(DCPTH){sub 4}(phen){sub 2}] 1 and [Cd{sub 3}(DCPTH){sub 2}(dcph){sub 2}(bpy){sub 2}] 2. 4,5-dichlorophthalhydrazidate derived from the hydrothermal in situ acylation reactions between 4,5-dichlorophthalic acid and N{sub 2}H{sub 4}.H{sub 2}O. > In this article, a simple method to judge whether the polycarboxylic acid precursors have acylated into the acylhydrazidate ligands is introduced. > In this article, DFT calculations were carried out on the excited electronic states of the compounds, the fluorescence emission properties of the compounds have been better understood. > this article, by the structural characterization of the obtained monoacylhydrazidate-containing compounds, the character of the monoacylhydrazidate ligands has been further understood.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real-time visualization of prion transport in single live cells using quantum dots

Prion diseases are fatal neurodegenerative disorders resulting from structural conversion of the cellular isoform of PrP{sup C} to the infectious scrapie isoform PrP{sup Sc}. It is believed that such structural alteration may occur within the internalization pathway. However, there is no direct evidence to support this hypothesis. Employing quantum dots (QDs) as a probe, we have recorded a real-time movie demonstrating the process of prion internalization in a living cell for the first time. The entire internalization process can be divided into four discrete but connected stages. In addition, using methyl-beta-cyclodextrin to disrupt cell membrane cholesterol, we show that lipid rafts play an important role in locating cellular PrP{sup C} to the cell membrane and in initiating PrP{sup C} endocytosis.

60 APPLIED LIFE SCIENCES↗