Engineering Papers⌕ Search

Engineering topics

Wu, Bingbin

Publications and source records attributed to Wu, Bingbin.

At least 19 records

Optimization and Commercialization of the Juvenile Eel/Lamprey Acoustic Transmitter and Micro-battery (CRADA 477)

Through collaboration with partners under this CRADA, we continued to optimize the Eel/Lamprey Acoustic Transmitter (ELAT) of the Juvenile Salmon Acoustic Telemetry System (JSATS) to enhance its capability to track sensitive species and early life stages of fish with 3D and sub-meter accuracy. The transmitter firmware was improved to offer new functionalities, and the circuit design was revised to provide significantly more accurate frequency transmission. The transmitter's transducer was replaced with a shorter, more energy-efficient model. Additionally, the manufacturing processes for the transmitter and the microbattery used in it were improved. The outcomes of this work help advance understanding of migration timing and behaviors, habitat use, and survival rates of these species, supporting more informed management decisions for new and existing hydroelectric facilities and better designs for new hydropower systems that minimize or avoid environmental impacts.

13 HYDRO ENERGY↗

Assessing cathode–electrolyte interphases in batteries

The cathode-electrolyte interphase plays a pivotal role in determining the usable capacity and cycling stability of electrochemical cells, yet it is overshadowed by its counterpart, the solid-electrolyte interphase. This is primarily due to the prevalence of side reactions, particularly at low potentials on the negative electrode, especially in state-of-the-art Li-ion batteries where the charge cutoff voltage is limited. However, as the quest for high-energy battery technologies intensifies, there is a pressing need to advance the study of cathode-electrolyte interphase properties. Here, we present a comprehensive approach to analyse the cathode-electrolyte interphase in battery systems. We underscore the importance of employing model cathode materials and coin cell protocols to establish baseline performance. Additionally, we delve into the factors behind the inconsistent and occasionally controversial findings related to the cathode-electrolyte interphase. In conclusion, we also address the challenges and opportunities in characterizing and simulating the cathode-electrolyte interphase, offering potential solutions to enhance its relevance to real-world applications.

25 ENERGY STORAGE↗

Understanding and Enhancing Silicon Nanoparticle Distribution during Electrode Processing

Silicon-dominant anodes are of great interest because of their potential to boost the cell-level energy of state-of-the-art Li-ion batteries. While silicon materials have been extensively studied, understanding interactions at the electrode level has recieved little attention, especially the coating process of Si particles, which plays an equally important role in unlocking the full potential of silicon anodes. Herein, the electrode processing of a Si-dominated anode (52.8 wt%, 3.5–4.5 mAh cm −2 ) is being investigated to understand the relationship of processing on the morphology and properties of Si anodes at the electrode level. It has been found that almost-undetectable Si agglomerates easily form during electrode processing, which grow into largeprotrusions after lithiation and trigger potential internal shorting and self-discharge problems. A facile slurry filtration step is proposed to homogenize the particle distribution within Si-dominant electrodes which improves the electrochemical performance and storage stability of Si-based Li ion batteries.

Wu, Bingbin↗

Controlled large-area lithium deposition to reduce swelling of high-energy lithium metal pouch cells in liquid electrolytes

Lithium (Li) metal battery technology, renowned for its high energy density, faces practical challenges, particularly concerning large volume change and cell swelling. Despite the profound impact of external pressure on cell performance, there is a notable gap in research regarding the interplay between external pressure and the electroplating behaviours of Li+ in large-format pouch cells. Here we delve into the impact of externally applied pressure on electroplating and stripping of Li in 350 Wh kg –1 pouch cells. Employing a hybrid design, we monitor and quantify self-generated pressures, correlating them with observed charge–discharge processes. A two-stage cycling process is proposed, revealing controlled pouch cell swelling of less than 10%, comparable to state-of-the-art Li-ion batteries. Finally, the pressure distribution across the cell surface unveils a complex Li+ detour behaviour during electroplating, highlighting the need for innovative strategies to address uneven Li plating and enhance Li metal battery technology.

25 ENERGY STORAGE↗

Rechargeable Micro-Batteries

The quest for efficient power sources for small sensors has led to a growing interest in rechargeable micro-batteries, offering the potential to harness energy from various sources for extended periods. This project delves into a multifaceted project aimed at enhancing the performance and viability of rechargeable micro-batteries in this context. The Pacific Northwest National Laboratory (PNNL) has leveraged its expertise in primary micro-battery development, evolving into a software-driven approach for designing cylindrical micro-batteries. This project addresses the cycle life issue through innovative cell design, electrode optimization, and electrolyte refinement. A case study of the MB1842 rechargeable micro-battery demonstrates the promising outcomes of these advancements, showcasing a capacity of 0.32 mAh at ~1C (0.35 mA) and remarkable cycle performance, extending the cycle life to 510-570 cycles at 80% end-of-life (EOL), 710-760 cycles at 70% EOL and 840-940 cycles at 60% EOL, thereby ensuring a service life of 10 years for these rechargeable micro-batteries. This endeavor represents a significant stride towards unlocking the full potential of rechargeable micro-batteries, paving the way for their widespread application in small sensor technologies. The outcome from this project also successfully supports the award of a new project: 80621 - Self-Powered Modular Acoustic Telemetry System with Sensing.

25 ENERGY STORAGE↗

Safe Electrolytes for Batteries

The demand for reliable and safe lithium-ion batteries (LIBs) for electric vehicles (EVs) and energy storage systems (ESS) necessitates the exploration of nonflammable phosphorus-based electrolytes as alternatives to the traditional flammable carbonate-based ones. However, integrating phosphorus-based electrolyte poses challenges, including capacity fading and compatibility issues with graphite material. Here, a high-throughput (HTP) electrochemical characterization method, similar to PH test paper, is introduced to fast screen compatible phosphorus-based electrolyte for use with graphite. Among 1,740 combinations of phosphorus-based electrolytes and graphite materials, 101 promising combinations are identified for further evaluation. These identified phosphorus-based electrolytes and graphite materials are evaluated and optimized in Li/Graphite half-cells and Graphite/LiFePO 4 (LFP) full-cells using commercial-level electrodes. The desolvation energy of a complex with one Li+ and four solvent molecules of phosphate or carbonate is calculated by density functional theory (DFT). Key parameters such as viscosity, ionic conductivity, and flammability of the electrolytes are thoroughly tested and optimized. The modified phosphate-dominant electrolyte (2 M LiFSI TEP/DME/EC (6/2/2, volume ratio) + 5 wt.% VEC + 5 wt.% FEC) demonstrates excellent thermal stability with lithiated graphite and showcases superior cycling performance in the Graphite/LFP full cell, surpassing prior research findings in phosphate-dominant electrolytes. By the rapid HTP screening and identification of compatible electrolyte-graphite combinations, this approach contributes to expediting the development of safer LIBs for EVs and ESS.

25 ENERGY STORAGE↗

A New Miniaturized Acoustic Transmitter for Marine Animal Tracking

Most marine renewable energy (MRE) technologies are still in their infancy. Many uncertainties remain regarding MRE systems’ impacts on the marine environment and species where they are deployed, which is one of the major hurdles for these systems to be widely adopted at a commercial scale. Currently, the primary technologies to monitor marine animals’ behavior around existing or potential MRE deployment sites are optical and acoustic imaging. However, these methods cannot identify individual animals and thus are less useful in identifying protected species and studying their behavior. Implantable acoustic transmitters with unique identification codes could serve as a complementary technology. To minimize potential bias introduced to the study results, the implanted transmitters must be sufficiently small and light to not affect the animals’ behavior while still having acceptable signal strengths and service life. Recently, we developed a new miniaturized acoustic transmitter that offers a significantly improved signal strength and service life (140 days [projected value] at a 5-s transmission interval) in a smaller and lighter package (0.45 g in the air), compared to the existing technologies. The detection range and detection efficiency of the new transmitter were tested in an actual marine environment and demonstrated a detection range of up to 330 m, a 65% improvement over the existing commercial counterparts operating at similar frequencies. Here, we report the design principles, performance, and manufacturing procedure of the transmitter. Finally, theoretical estimates of the detection range, the actual range, and detection efficiency results from the field testing are presented.

acoustic telemetry↗

Tracking the Oxidation of Silicon Anodes Using Cryo-EELS upon Battery Cycling

Silicon is a high-capacity material for the anode of a rechargeable lithium-ion battery. One of the fundamental challenges for using Si in anodes is capacity fading, which has been revealed to be partially associated with the interfacial instability between the Si and liquid electrolyte due to the large volume swing of Si upon charging and discharging. Smart nanoscale design concepts, either pre-synthesized or formed in-situ, have led to the mitigation of the detrimental factors associated with the volume swing of Si. However, it has never been clear as how the chemical state of Si evolves and contributes to the capacity fading upon battery cycling. Here, we use cryo-electron energy loss spectroscopy (EELS) to directly monitor, at sub-nanometer scale, the chemical evolution of Si upon battery cycling. We discover that during the cycling process, Si particles are progressively oxidized to form SiO 2 , which is initiated from the particle surface and gradually penetrates toward the interior of the particle, directly contributing to the capacity fading. Possible mechanisms of Si oxidation are postulated. We further show how the cycling stability can be improved by an electrolyte additive to form an effective passivation layer, representatively, even a small concentration of fluoroethylene carbonate (FEC) causes the formation of an LiF layer on the Si nanoparticle surface that prevents Si oxidation and improves cycling stability. Furthermore, the present work unveils Si oxidation as a previously unrecognized factor that contributes to capacity fading, therefore providing insight into the design of anodes with Si based materials.

25 ENERGY STORAGE↗

Cylindrical battery design app

Software that delivers optimal design parameters and performance predictions for cylindrical cells, which can range in size from microbatteries to EV batteries, is developed. The software utilizes machine learning and includes a graphical user interface to enable rapid prototyping and to accelerate energy storage research, development, and manufacturing. The Cylindrical battery design V1.0 comprises of three types of cylindrical batteries, Microbattery (Primary), Microbattery (Secondary) and 18650/21700/xxxxx Cylindrical battery. The software was developed in MATLAB. The software has the capability to output the cell design with the capacity ranges from several mAh to several million Ah.

Xiao, Jie↗

Machine Learning Software for Cylindrical Battery Design and Performance Prediction

A software that delivers optimal design parameters and performance predictions for cylindrical cells, which can range in size from micro batteries to EV batteries, is developed. The Cylindrical battery design V1.0 is comprised of three types of cylindrical batteries, Micro battery (Primary), Micro battery (Secondary) and 18650/21700/xxxxx cylindrical battery. The software was developed in MATLAB. The software has the capability to output the cell design with the capacity ranges from several mAh to several million Ah. The software utilizes machine learning and includes a graphical user interface to enable rapid prototyping to accelerate energy storage research, development, and manufacturing.

25 ENERGY STORAGE↗

Locking oxygen in lattice: A quantifiable comparison of gas generation in polycrystalline and single crystal Ni-rich cathodes

High-energy Ni-rich NMC (LiNi x Mn y Co 1-x-y O 2 , x ≥ 0.6) is a very promising cathode material in Li-ion batteries but the gas generation during cycling is a significant safety concern and becomes the major roadblock of the large-scale commercialization of Ni-rich NMC cathode materials. Micron-sized single crystal Ni-rich NMC has a potential to address the common issues that polycrystals have. However, it is unknown if gassing issue will be mitigated or even eliminated by using single crystals, not mentioning a quantifiable understanding of gas generation from single crystals and polycrystals. This work takes LiNi 0.76 Mn 0.14 Co 0.1 O 2 (NMC76) as a model material to study the mechanism of gas generation from single crystal and polycrystalline NMC by using both coin cells and pouch cells, which provides different conclusions on the generated gases, highlighting the importance of using relevant testing conditions for fundamental diagnostic study on battery materials. Further, the information from single crystal NMC also provides critical insights from material perspective to enhance the safety attributes of Ni-rich NMC cathodes.

25 ENERGY STORAGE↗

Pushing the Limits of Micro battery Capacity and Energy

Micro battery with higher energy density will extend the service life of the miniature sensors so that the scientists and engineers could be able to collect more data along with the time in ecological and environmental vectors, such as animal tracking. Within this project, a completely new cell design (Gen2) for micro batteries to further increase their cell capacity and energy is developed. The new cell design directly packages the active material in a hard aluminum case, decreasing the percentage of non-active components. The manufacturing process to improve wetting ability is studied and the trial run is finally given to evaluate the feasibility of the proposed technology. It’s found that both the capacity and energy with same battery size could be increased by 30% comparing with Gen1 micro battery technology previously developed by PNNL. The yield of Gen2 micro batteries is still lower due to the high degree of manual operation, especially for drilling process where more precise position control is needed. More effort is still required to improve the capability of automatic manufacturing processes. The new battery technology will support the development of smaller and lighter miniature sensors at PNNL and could potentially contribute to the large-scale manufacturing capabilities of micro batteries in US with reliable performances and long-term shelf life.

25 ENERGY STORAGE↗

Achieving Highly Reproducible Results in Graphite-based Li-ion Full Coin Cells

Electrode materials, cathodes or anodes, are mostly evaluated in half coin cells where lithium (Li) metal is used. However, due to the instability nature of Li metal, the cycling performances of the half cells is more likely reflecting Li anode stability instead of the coupled electrodes, questioning the conclusions. Full coin cells utilizing graphite as the anode effectively assesses materials. But the key factors of preparing full coin cells with reproducible performances have rarely been discussed and overlooked leading to many inconsistent results. This work discusses the scientific gap between cell preparation and observed electrochemical performances to unveil the key parameters for achieving consistent and reliable results in full coin cells, critical for effective evaluation of any new materials tested under relevant conditions. The knowledge from this work is broadly applicable in other full cells systems such as Si-based full cells or Na-ion batteries.

Hu, Jiangtao↗

A miniaturized long-life acoustic transmitter for animal tracking in marine environments

Marine and hydrokinetic (MHK) energy devices are early-stage technologies and their impacts to ocean life and environment are largely unknown, which consequently limits the progress of deploying these devices at commercial scale. Optical and acoustic imaging have been the primary technologies for monitoring marine animals’ behavior at existing or potential MHK sites. However, these technologies lack the ability to identify individual animals, which makes them less useful in identifying protected species as well as studying the animals’ long-term behavior. Implantable acoustic transmitters with unique identification codes could be used as a complementary technology. To minimize the tag burden on the tagged animal (and hence the resulting bias) and to satisfy the long-term monitoring needs, it is desired that the implanted transmitter be as small and light as possible and can last for as long as possible. To date, the smallest acoustic transmitters suitable for marine animal tracking have relatively short service life and detection range (up to 200 m). In this report, we introduce a new miniaturized acoustic transmitter which operates at 208.3 kHz. It offers a smaller dry weight (0.45 g), a significantly longer service life (140 days at a 5-second ping rate) as well as a greater detection range than the existing commercial counterparts, which will help obtain more comprehensive movement and behavioral information of animals around MHK energy devices.

Li, Huidong↗