MoonBEAM A Beyond Earth-Orbit GRB Detector for Multi-Messenger Astronomy
No abstract available
Hui, C. Michelle↗
Engineering topics
Wood, J.
Publications and source records attributed to Wood, J..
Characterizing Performance of Additively Manufacturing Regenerative Cooled Combustion Chambers Through Hot Fire Testing
NASA Marshall Space Flight Center (MSFC) has developed several additive manufactured regenerative cooled combustion chambers from 2014 to present. Chambers have been constructed using the Selective Laser Melting (SLM) powder bed additive manufacturing (AM) technique. The materials used for the chambers has varied from Inconel 718, Inconel 625, GRCop-84, and C18150 metal alloys. The surface finish and build techniques used to successfully manufacture combustion chambers using the SLM AM result in as built surface finish and off nominal geometric features. This paper discusses and reviews the effects of surface roughness, flow area, and hydraulic performance of regenerative cooled combustion chambers. The thrust chambers designs tested ranged from 200 to 1,400 psia producing 1,000 to 35,000 lbf thrust. Empirical data from four test campaigns will be reviewed and related to design modeling parameters such as pressure drop, surface roughness, and actual fluid flow geometry. Correlation results with simple 2-D CFD modeling will also be presented. The goal of the work is to better understand how the finished additive manufactured component characteristics inside internal features can effect regenerative cooling chamber design. Adjustments to design methodology will be discussed and recommended based on the above results.
Garcia, C. P.↗
MSL project trades model
Explore the source record for details and available documents.
trades modeling rapid system engineering↗
Is it really so bad? A comparison of positive and negative experiences in Antarctic winter stations
This study examined the range of positive and negative themes reported by 104 Australian Antarctic winter personnel at four stations during two austral winters. Reports from the expeditioners were subjected to a content analysis using the TextSmart software from SPSS, Inc. Results indicated that, although the list of negative experiences is lengthy, most events are relatively rare. On the other hand, although the list of positive experiences is short, the frequencies with which they are reported are much greater than for most of the problems. Possible explanations for these themes and for future directions are discussed.
NASA Discipline Space Human Factors↗
Psychological changes in hundred-day remote Antarctic field groups
Psychological adaptation to extreme environments has been examined from several perspectives. In this study, two Australian teams, each consisting of six male crew members, completed computer-administered questionnaires twice weekly during 100-day traverses around the Lambert Glacier Basin, Antarctica. Only small trends were noted when data were aggregated at the group level, which is consistent with the findings of others. Data were then analyzed using pooled time-series regression. These analyses incorporated personality characteristics, environmental factors, and interpersonal factors as predictors of Group Tensions, Personal Morale, Emotional State, Cognitive Readiness, and the Team's Work Life. Most of the psychological discomfort and problems that occurred appeared to be within the individual or between individuals. They did not affect all members of the group equally.
NASA Discipline Space Human Factors↗
Psychological Adaptation to Extreme Environments: Effects of Team Composition on Individual Adaptation
This study is part of an ongoing program of research examining the psychological effects of isolation and confinement on individual adaptation, productivity and group relations in Antarctic winter personnel. This environment is used as an analogue for long-duration space mission scenarios, such as a space station sojourn, or a mission to Mars. Earlier results from this and other environments have demonstrated that: (1) most changes in psychological well-being are event-related and of relatively short duration; and (2) the greatest problem facing most individuals is interpersonal conflict. Content analysis of responses to open-ended questions has identified the numerous enjoyable aspects of Antarctic living, and confirmed that many of the problems reported were interpersonal in nature, and that problems varied significantly by station. Current work is exploring the effects of team assignment on the self-reported psychological changes and self-evaluations of members of isolated teams. This work includes identifying the dimensions by which subjects determine how well they are functioning. These dimensions (e.g., work, social life, internal emotional state) appear to play an important role in how subjects evaluate many aspects of life in isolation.
Wood, J.↗
Relative displacement measurements for two-body problems
While high-sensitivity moire interferometry is very effective for displacement measurements in continuous bodies, special difficulties arise with two-body problems. Fringes may become discontinuous at the boundary between the bodies and as a result the relative displacements cannot be extracted from the fringe patterns. In this work, flexible bridges are used between the bodies to provide a continuous path for fringe counting. The bridges are made of relatively low modulus material and have a low stiffness geometry, such that they deform under minimal load. The experimental methods used for obtaining relative displacement measurements in two-body problems are described for the two cases; dovetail joint in turbo-machinery, and thick adherend lap joint.
Post, D.↗
Deformation measurements of composite multi-span beam shear specimens by Moire interferometry
Experimental analyses were performed for determination of in plane deformations and shear strains in unidirectional and quasi-isotropic graphite-epoxy beams. Forty-eight ply beams were subjected to 5 point and 3 point flexure. Whole field measurements were recorded at load levels from about 20% to more than 90% of failure loads. Contour maps of U and W displacement fields were obtained by moire interferometry, using reference gratings of 2400 lines/mm. Clearly defined fringes with fringe orders exceeding 1000 were obtained. Whole field contour maps of shear strains were obtained by a method developed for these tests. Various anomalous effects were detected in the displacement fields. Their analysis indicated excess shear strains in resin rich zones in regions of shear tractions; free edge shear strains in quasi-isotropic specimens in regions of normal stresses; and shear stresses associated with cyclic shear compliances of quasi-isotropic plies in regions of shear tractions. Their contributions could occur independently or in superposition. Qualitative analyses addressed questions of relaxation; influence of contact stress distribution; specimen failure; effect of specimen overhang; nonlinearity; and qualities of 5 and 3 point flexure tests.
Post, D.↗
Deformations and strains in adhesive joints by moire interferometry
Displacement fields in a thick adherend lap joint and a cracked lap shear specimen were measured by high sensitivity moire interferometry. Contour maps of in-plane U and V displacements were obtained across adhesive and adherent surfaces. Loading sequences ranged from modest loads to near-failure loads. Quantitative results are given for displacements and certain strains in the adhesive and along the adhesive/adherend boundary lines. The results show nonlinear displacements and strains as a function of loads or stresses and they show viscoelastic or time-dependent response. Moire interferometry is an excellent method for experimental studies of adhesive joint performance. Subwavelength displacement resolution of a few micro-inches, and spatial resolution corresponding to 1600 fringes/inch (64 fringes/mm), were obtained in these studies. The whole-field contour maps offer insights not available from local measurements made by high sensitivity gages.
Post, D.↗
Origin of Archean anorthosites - Evidence from the Bad Vermilion Lake anorthosite complex, Ontario
Studies of the petrology and geochemistry of the anorthosite complex at Bad Vermillion Lake, Canada, based on 400 samples collected in summer, 1979, are presented. Petrographic, microprobe, X-ray-fluorescence, and instrumental-neutron-activation analyses were performed. Major and trace-element abundances of the anorthositic rocks and surrounding mafic and felsic rocks are reported in tables, chondrite-normalized rare-earth-element patterns are shown, and the anorthositic, intrusive, and metavolcanic formations are characterized in detail. The anothrositic plagioclases are found to have a coarse porphyritic texture and calcic composition (80 normative mol percent An) similar to those of other Archean anorthosite complexes. Chemical similarities indicate that the gabbro and mafic to felsic metavolcanic formations associated with the anorthosite complex may be comagmatic with it, while the absence of ultramafic material and the bulk composition of the comagmatic basalt (about 20 wt percent Al2O3) suggest that much of the original comagmatic material has been separated.
Ashwal, L. D.↗
Report of the Terrestrial Bodies Science Working Group. Volume 5: Mars
Present knowledge of the global properties and surface characteraretics of Mars and the composition and dynamics of its atmosphere are reviewed. The objectives of proposed missions, the exploration strategy, and supporting research and technology required are delineated.
Masursky, H.↗
ON THE BUCKLING OF CYLINDRICAL SHELLS UNDER DYNAMIC LOADS
Experimental and analytical program on the buckling of thin-walled cylinder shells under dynamic loads
DYNAMIC STABILITY↗