Engineering PapersSearch

Engineering topics

Wong, W. C.

Publications and source records attributed to Wong, W. C..

LDEF Space Plasma-High Voltage Drainage Experiment post-flight results

The Space Plasma-High Voltage Drainage Experiment (SP-HVDE) was comprised of two identical experimental trays. With one tray located on the leading (ram facing, B10) edge and the other located on the trailing (wake facing, D4) edge of the Long Duration Exposure Facility (LDEF), it was possible to directly compare the effects of ram and wake spacecraft environments on charged dielectric materials. Six arrays of Kapton dielectric samples of 2 mil, 3 mil, and 5 mil thicknesses maintained at +/- 300, +/- 500, and +/- 1000 voltage bias formed the experimental matrix of each tray. In addition, each tray carried two solar cell strings, one biased at +300 volts and the other at -300 volts, to study current leakage from High Voltage Solar Arrays (HVSA). The SP-HVDE provides the first direct, long-term, in-flight measurements of average leakage current through dielectric materials under electric stress. The experiment also yields information on the long term stability of the bulk dielectric properties of such materials. Data and findings of the SP-HVDE are an extension of those from shorter term flight experiments such as the PIX-1 (Plasma Interaction Experiment) and PIX-2 and are therefore valuable in the design and evaluation of long-lived space systems with high voltage systems exposed to the low earth orbital environment. A summary of the SP-HVDE post flight analysis final report delivered to the LDEF Project Office under contract to the National Aeronautics and Space Administration is presented.

Yaung, J. Y.

LDEF SP-HVDE (Space Plasma-High Voltage Drainage Experiment) post-flight results: Leakage current and discharge

TRW designed and fabricated two identical SP-HVDE trays which were flown in the NASA LDEF (Long Duration Exposure Facility) for 5.75 years in the LEO (low earth orbit) environment. One tray was placed near the leading edge and one near the trailing edge, and investigations were performed to compare the environmental interactions on the dielectric samples of the two trays. Each tray consisted of six assemblies with Kapton dielectric samples of varying thicknesses (i.e., 2 mils, 3 mil, and 5 mils) biased under +/- 300 V, +/- 500 V, and +/- 1000 V. The original objective was successfully achieved by measuring the first in-flight average leakage current through the samples. Less than 5 percent of the post-flight coulometers behaved anomalously. The data should be valuable to the design and evaluation of spacecraft with high voltage systems. M/D (micrometeoroid and debris) impacts over the dielectric samples were examined using a SEM (Scanning Electron Microscope) and an EDS (Energy Dispersive x-ray Spectrometer). These impact sites were sprayed by silver which were most likely caused either by the impact or a 'local ESD' (electrostatic discharge).

Yaung, J. Y.

LDEF SP-HVDE (space plasma-high voltage drainage experiment) post-flight data on spacecraft leakage current and discharge

Two identical SP-HVDE (Space Plasma-High Voltage Drainage Experiment) trays were designed and fabricated and were flown in the NASA LDEF in the LEO environment. The trays were placed with one near the leading edge and one near the trailing edge, and investigation was performed to compare the environmental interactions on the dielectric samples of the two trays. The original objective was successfully achieved by measuring the first in-flight long term average leakage current through 156 coulometers. Less than 5 percent anomalous behavior of the coulometers were found in the post flight analysis.

Yaung, J. Y.

LEO spacecraft leakage current and discharging phenomena - TRW LDEF SP-HVDE (space plasma-high voltage drainage experiment)

Two identical SP-HVDE trays were flown in the NASA 5.75-year LDEF (Long Duration Exposure Facility), one near the leading edge and the other near the trailing edge, in the LEO (low earth orbit) environment. Each experiment tray consisted of six assemblies with each made of Kapton dielectric samples of varying thicknesses (i.e., 2 mils, 3 mils, and 5 mils) biased under +/- 300 V, +/- 500 V, and +/- 1000 V. The objectives have been successfully achieved by measuring the first post-flight long-term (i.e. roughly 8-month experiment) average leakage current through 95 percent measurable coulombmeters and surface materials.

Yaung, J. Y.

Multiple-Beam Communications Antenna

System has both fixed-spot and scanning coverage. Advanced offset-fed spacecraft antenna systems operating in 30/20 GHz frequency bands developed to provide multiple-radiating fixed-spot and regional-coverage scanning beams for use on communications satellites. Operating at higher frequencies, provides alternate frequency bands for expansion of existing satellite services and achieving frequency reuse capability for conservation of frequency spectrum. 20-GHz transmitting antenna is offset-fed, dual-reflector configuration. 30-GHz receiving antenna has orthogonal polarized feeds, hyperbolic reflectors, and two subreflectors.

Myhre, R. W.