Engineering topics

Wolfram, Phillip J.

Publications and source records attributed to Wolfram, Phillip J..

8 records

DOE OSTI2022

The DOE E3SM Model Version 2: Overview of the Physical Model and Initial Model Evaluation

Abstract This work documents version two of the Department of Energy's Energy Exascale Earth System Model (E3SM). E3SMv2 is a significant evolution from its predecessor E3SMv1, resulting in a model that is nearly twice as fast and with a simulated climate that is improved in many metrics. We describe the physical climate model in its lower horizontal resolution configuration consisting of 110 km atmosphere, 165 km land, 0.5° river routing model, and an ocean and sea ice with mesh spacing varying between 60 km in the mid‐latitudes and 30 km at the equator and poles. The model performance is evaluated with Coupled Model Intercomparison Project Phase 6 Diagnosis, Evaluation, and Characterization of Klima simulations augmented with historical simulations as well as simulations to evaluate impacts of different forcing agents. The simulated climate has many realistic features of the climate system, with notable improvements in clouds and precipitation compared to E3SMv1. E3SMv1 suffered from an excessively high equilibrium climate sensitivity (ECS) of 5.3 K. In E3SMv2, ECS is reduced to 4.0 K which is now within the plausible range based on a recent World Climate Research Program assessment. However, a number of important biases remain including a weak Atlantic Meridional Overturning Circulation, deficiencies in the characteristics and spectral distribution of tropical atmospheric variability, and a significant underestimation of the observed warming in the second half of the historical period. An analysis of single‐forcing simulations indicates that correcting the historical temperature bias would require a substantial reduction in the magnitude of the aerosol‐related forcing.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Impact of Coastal Marsh Eco‐Geomorphologic Change on Saltwater Intrusion Under Future Sea Level Rise

Abstract Coastal saltwater intrusion (SWI) is one key factor that affects the hydrology, ecology, and biogeochemistry of coastal ecosystems. Future climate change, especially intensified sea level rise (SLR), is expected to trigger SWI to encroach on coastal freshwater aquifers more intensively. Numerous studies have investigated decadal/century scale SWI under SLR by assuming a static coastal landscape topography. However, coastal landscapes are highly dynamic in response to SLR, and the impact of coastal landscape evolution on SWI has received very little attention. Thus, this study used a coastal marsh landscape as an example and investigated how coastal marsh evolution affects future SWI with a physically‐based coastal hydro‐eco‐geomorphologic model, Advanced Terrestrial Simulator. Our numerical experiments showed that it is very likely that the marsh elevation increases with future SLR due to sediment deposition, and a depression zone is formed due to different marsh accretion rates between the ocean boundary and the inland. We found that marsh accretion may significantly reduce the surface saltwater inflow at the ocean boundary, and the evolved topographic depression zone may prolong the residence time of surface ponded saltwater, affecting subsurface salinity distribution differently. We also predicted that marshlands may become more sensitive to upland freshwater supply under future SLR, compared with previous predictions without marsh evolution. This study demonstrates the importance of coastal evolution to coastal freshwater‐saltwater interaction. The eco‐geomorphologic effect may not be ignored when evaluating coastal SWI under SLR at decadal or century scales.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

The Influence of Ocean Topography on the Upwelling of Carbon in the Southern Ocean

The physical circulation of the Southern Ocean sets the surface concentration and thus air-sea exchange of CO 2 . However, we have a limited understanding of the three-dimensional circulation that brings deep carbon-rich waters to the surface. Here, we introduce and analyze a novel high-resolution ocean model simulation with active biogeochemistry and online Lagrangian particle tracking. We focus our attention on a subset of particles with high dissolved inorganic carbon (DIC) that originate below 1,000 m and eventually upwell into the near-surface layer (upper 200 m). We find that 71% of the DIC-enriched water upwelling across 1,000 m is concentrated near topographic features, which occupy just 33% of the Antarctic Circumpolar Current. Once particles upwell to the near-surface layer, they exhibit relatively uniform pCO 2 levels and DIC decorrelation timescales, regardless of their origin. Furthermore, our results show that Southern Ocean bathymetry plays a key role in delivering carbon-rich waters to the surface.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Effects of different vegetation drag parameterizations on the tidal propagation in coastal marshlands

Vegetation drag is a fundamental quantity directly affecting results for both long- and short-term coastal marsh and geomorphological studies. The vegetation drag in coastal marshland has been modeled by various two-dimensional (2D) and threedimensional (3D) numerical parameterizations. 2D parameterizations treat coastal marshes as bottom roughness elements, while 3D parameterizations resolve the vertically-variable vegetation drag through the water column. However, differences in tidal propagation arising from different drag parameterizations within a single model are largely unknown, and clear guidance on parameterization selection is still missing. In this study, we implemented four vegetation drag parameterizations into the Model for Prediction Across Scales-Ocean (MPAS-O), which include 1) a 2D parameterization using land-cover type-determined Manning’s n (2DLM); 2) a 2D parameterization using vegetation-determined Manning’s n (2DVM); 3) a 3D parameterization for stiff vegetation (3DSV); and 4) a 3D parameterization for flexible vegetation (3DFV). Estimates of the flow resistance effects from these parameterizations were compared using a series of idealized tidal propagation simulations. Given the same tidal condition, flooding depth and flooding distance are the largest in the 2DLM simulations and the smallest in the 3DSV simulations. 2DVM results are the closest to the 2DLM results. 3DFV results are the closest to the average of 2DVM, 3DSV, and 3DFV results. 2DVM and 3DSV results are the least and most sensitive to the vegetation aboveground biomass, respectively. Based on the input data requirement and computational efficiency of each parameterization, a comparison summary is provided to help inform parameterization selection for specific applications. Here, the effects of these parameterizations on coastal geomorphology are further discussed, and the results demonstrate that estimates of the long-term evolution of coastal marshes and coastal morphology depend upon the selection of the vegetation drag parameterization

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Simulating the Trajectory and Biomass Growth of Free-Floating Macroalgal Cultivation Platforms along the U.S. West Coast

Trajectory tracking and macroalgal growth models were coupled to support a novel macroalgae-harvesting concept known as the Nautical Off-shore Macroalgal Autonomous Device (NOMAD). The NOMAD consists of 5 km long carbon-fiber longlines that are seeded and free float southward along the U.S. West Coast for approximately 3 months before harvesting off the California coast, taking advantage of favorable environmental conditions. The trajectory and macroalgal growth models were applied to answer planning questions pertinent to the techno-economic analysis such as identifying the preferred release location, approximate pathway, timing until harvest, and estimated growth. Trajectories were determined with the General NOAA Operational Modeling Environment (GNOME) model, using 11 years of current and wind data, determining probabilities by running nearly 40,000 Monte Carlo simulations varying the start time and location. An accompanying macroalgal growth model was used to estimate the growth of macroalgae based on the trajectory tracks and environmental forcing products, including light, temperature and nutrients. Model results show that NOMAD lines transit south in the months of April to September due to seasonal currents, taking approximately 3 months to reach Southern California. During transit, NOMAD lines are dispersed but typically avoid beaching or passing through marine sanctuaries. NOMAD lines can yield up to 30 kg wet weight per meter of cultivation line.

09 BIOMASS FUELS↗

DOE OSTI2020

Multi-resolution, Multi-scale Modeling for Scalable Macroalgae Production

Macroalgae harvested along coastlines and in the open ocean has traditionally been used as food for human consumption, animal feed, and fertilizer. The U.S. ARPA-E MARINER Program estimates that the nation has suitable conditions and geography to produce at least 500 million dry metric tons of macroalgae per year, yielding approximately 2.7 quadrillion BTUs of energy in the form of liquid fuel, which is roughly 10% of the nation’s annual transportation energy demand. Adverse environmental effects of nutrient overload and ocean acidification may also be reduced by large-scale macroalgae cultivation in many coastal ocean regions. However, the successful deployment of large-scale marine macroalgae farms for fuel production depends on ambient hydrodynamic conditions and nutrient availability, as well as their interactions with macroalgae farm structures. Pacific Northwest National Laboratory led an ARPA-E MARINER project to develop a set of numerical modeling tools capable of simulating ocean hydrodynamic and biogeochemical processes, macroalgae trajectories for free-floating systems, macroalgae growth and biomass yields, and hydrodynamic load on macroalgae canopies and farm structures using a multi-resolution and multi-scale approach. This set of modeling tools provides a suite of information essential for system design, optimal project siting, risk analysis, and management of macroalgae production systems in the ocean. Better clarity can also help macroalgae system developers reduce deployment costs, operational risk, and potential impacts on the local marine environment.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS2020

MPAS - Ocean Simulation Quality for Variable-Resolution North American Coastal Meshes

Climate model components utilizing unstructured meshes enable variableresolution, regionally enhanced simulations within global domains. Here we investigate the relationship between mesh quality and simulation statistics using the JIGSAW unstructured meshing library and the Model for Prediction Across ScalesOcean (MPASOcean) with a focus on Gulf Stream dynamics. In the base configuration, the refined region employs 8 km cells that extend 400 km from the coast of North America. This coastal refined region is embedded within a lowresolution global domain, with cell size varying latitudinally between 30 and 60 km. The resolution transition region between the refined region and background mesh is 600 km wide. Three sensitivity tests are conducted: 1) the quality of meshes is intentionally degraded so that horizontal cells are progressively more distorted; 2) the transition region from high to low resolution is steepened; and 3) resolution of the coastal refinement region is varied from 30 km to 8 km. Overall, the ocean simulations are shown to be robust to mesh resolution and quality alterations. Meshes that are substantially degraded still produce realistic currents, with Southern Ocean transports within 0.4% and Gulf Stream transports within 12% of highquality mesh results. The narrowest transition case of 100 km did not produce any spurious effects. Refined regions with high resolution produce eddy kinetic energy and sea surface height variability that are similar to the highresolution reference simulation. These results provide heuristics for the design criteria of variableresolution climate model domains.

Hoch, Kristin E.↗

NASA NTRS2019

Using Power Diagrams to Build Optimal Unstructured Meshes for C-Grid Models

The Model for Prediction Across Scales (MPAS) for Ocean (-O), Sea-Ice (-SI) and Land-Ice (-LI), in addition to the Coastal Ocean Marine Prediction Across Scales (COMPAS) are two novel general circulation models designed to resolve coupled ocean-ice dynamics over variable spatial scales using non-uniform unstructured grids. Both models are based on a conservative mimetic finite-difference/volume formulation (TRiSK), in which staggered momentum, vorticity and mass-based degrees- of-freedom are distributed over an orthogonal 'primal-dual' mesh.

Engwirda, Darren↗