Engineering Papers⌕ Search

Engineering topics

Wolf, Sam

Publications and source records attributed to Wolf, Sam.

Elastocaloric effect in vanadium (IV) oxide

Elastocaloric cooling utilizes the latent heat associated with stress-induced reversible phase transformations to achieve cooling. Currently, the key barrier to this technology is its prohibitive cost due to the high elastocaloric material cost and the large stress required to drive the cooling cycle. Vanadium (IV) oxide (VO 2 ) is a good candidate, and it is relatively cheap. Our calorimetry study shows it exhibits a reversible phase transformation with a large latent heat of 31.5 J/g, as well as excellent functional stability. Its transformation temperature and latent heat are tunable via heat treatment. We demonstrated that VO 2 powders can be cyclically compressed in a steel tube using a steel plunger to drive the elastocaloric effect. The application of relatively low stress of 300 MPa is sufficient to result in a reversible temperature change of 0.5 °C on the powder compact. Further improvement of reversible temperature change to 1.6 °C under 300MPa is achieved by adding conductive copper powders. Future efforts should focus on improving material properties such as heat capacity and thermal conductivity for candidate ceramic oxides to maximize elastocaloric effects.

36 MATERIALS SCIENCE↗

Synthesis and magnetic performance of gadolinium powder produced with rotating disk atomization

Spherical powder is key for achieving good heat transfer and maintaining low pressure drop for heat transfer fluid in magnetocaloric regenerator. Obtaining relatively large spherical powder of rare earth metals that are extremely sensitive to oxygen is challenging. Comparing to gas atomization and plasma rotating electrode methods, rotating disk atomization (RDA) method is more robust for obtaining a small amount of powder with a short turn-around time, thereby, more suitable for research and development of new magnetocaloric materials. In this work, commercially bulk gadolinium was successfully atomized to produce spherical powder in the targeted 150–250 μm range. The obtained powder exhibited the expected magnetocaloric performance with a maximum change of magnetic entropy of 12.1 J/kg K and a maximum adiabatic temperature change of 12.8 K with an applied magnetic field of 7 T.

36 MATERIALS SCIENCE↗