Opportunities for Cost Savings with In-transit Visualization
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Wolf, M.
Explore the source record for details and available documents.
This work compares the two major paradigms for doing in situ visualization: in-line, where the simulation and visualization share the same resources, and in-transit, where simulation and visualization are given dedicated resources. Our runs vary many parameters, including simulation cycle time, visualization frequency, and dedicated resources, to study how tradeoffs change over configuration. In particular, we consider simulations as large as 1,024 nodes (16,384 cores) and dedicated visualization resources with as many as 512 nodes (8,192 cores). We draw conclusions about when each paradigm is superior, such as in-line being superior when the simulation cycle time is very fast. Surprisingly, we also find that in-transit can minimize the total resources consumed for some configurations, since it can cause the visualization routines to require fewer overall resources when they run at lower concurrency. For example, one of our scenarios finds that allocating 25% more resources for visualization allows the simulation to run 61% faster than its in-line comparator. Finally, we explore various models for quantifying the cost for each paradigm, and consider transition points when one paradigm is superior to the other. Our contributions inform design decisions for simulation scientists when performing in situ visualization.
Abstract not provided
Glass welding by ultrashort laser pulses allows joining without the need of an absorber or a preheating and postheating process. However, cracks generated during the welding process substantially impair the joining strength of the welding seams. In this paper a sample preparation method is described that prevents the formation of cracks. The measured joining strength of samples prepared by this method is substantially higher than previously reported values.
Massively parallel computations consist of a mixture of computation, communication, and I/O. As part of the co-design for the inevitable progress towards exascale computing, we must apply lessons learned from past work to succeed in this new age of computing. Of the three components listed above, implementing an effective parallel I/O solution has often been overlooked by application scientists and was usually added to large scale simulations only when existing serial techniques had failed. As scientists teams scaled their codes to run on hundreds of processors, it was common to call on an I/O expert to implement a set of more scalable I/O routines. These routines were easily separated from the calculations and communication, and in many cases, an I/O kernel was derived from the application which could be used for testing I/O performance independent of the application. These I/O kernels developed a life of their own used as a broad measure for comparing different I/O techniques. Unfortunately, as years passed and computation and communication changes required changes to the I/O, the separate I/O kernel used for benchmarking remained static no longer providing an accurate indicator of the I/O performance of the simulation making I/O research less relevant for the application scientists. In this paper we describe a new approach to this problem where I/O kernels are replaced with skeletal I/O applications automatically generated from an abstract set of simulation I/O parameters. We realize this abstraction by leveraging the ADIOS middleware's XML I/O specification with additional runtime parameters. Skeletal applications offer all of the benefits of I/O kernels including allowing I/O optimizations to focus on useful I/O patterns. Moreover, since they are automatically generated, it is easy to produce an updated I/O skeleton whenever the simulation's I/O changes. In this paper we analyze the performance of automatically generated I/O skeletal applications for the S3D and GTS codes. We show that these skeletal applications achieve performance comparable to that of the production applications. We wrap up the paper with a discussion of future changes to make the skeletal application better approximate the actual I/O performed in the simulation.
Thermally grown SiO{sub 2} layers were treated by a plasma nitridation process realized in a vertical furnace. The combination of a pulsed-low frequency plasma and a microwave remote plasma with N{sub 2}/NH{sub 3}/He feed gas mixture was used to nitride the thermally grown SiO{sub 2} gate dielectrics of MIS structures. Temperature dependency of effective masses and the barrier heights for electrons in pure thermally grown SiO{sub 2} as well as plasma nitrided SiO{sub 2} in high electric field by means of Fowler-Nordheim regime was determined. It is frequently seen from the literature that either effective electron mass or barrier height (generally effective electron mass) is assumed to be a constant and, as a result, the second parameter is calculated under the chosen assumption. However, in contrast to general attitude of previous studies, this work does not make any such assumptions for the calculation of neither of these two important parameters of an oxide at temperature ranges from 23 to 110 deg. C for SiO{sub 2}, and 23 to 130 deg. C for nitrided oxide. It is also shown here that both parameters are affected from the temperature changes; respectively, the barrier height decreases while the effective mass increases as a result of elevated temperature in both pure SiO{sub 2} and plasma nitrided SiO{sub 2}. Therefore, one parameter could be miscalculated if the other parameter, i.e., effective mass of electron, was assumed to be a constant with respect to variable physical conditions like changing temperature. Additionally, the barrier heights were calculated just by taking constant effective masses for both types of oxides to be able to compare our results to common literature values.
WW Camelopardalis is a relatively bright eclipsing binary system with a slightly eccentric orbit. A dozen of its new eclipse times were measured as part of our long-term observational project of eccentric eclipsing binaries. Based on a new solution of the current O - C diagram, we found for the first time an apsidal motion in good agreement with theory. Its period is about 370 {+-} 50 years. The determined internal structure constant is close to the theoretically expected value. The relativistic effect is significant, being about 13% of the total apsidal motion rate.