Engineering topics

Wojtasinski, R. J.

Publications and source records attributed to Wojtasinski, R. J..

8 records

NASA NTRS1978

Lightning current waveform measuring system

An apparatus is described for monitoring current waveforms produced by lightning strikes which generate currents in an elongated cable. These currents are converted to voltages and to light waves for being transmitted over an optical cable to a remote location. At the remote location, the waves are reconstructed back into electrical waves for being stored into a memory. The information is stored within the memory with a timing signal so that only different signals need be stored in order to reconstruct the wave form.

Wojtasinski, R. J.↗

NASA NTRS1975

Design of an optical fiber cable link for lightning instrumentation

A lightning instrumentation system was designed to record current magnitudes of lightning strikes that hit a launch pad service structure at NASA's Kennedy Space Center. The instrumentation system consists of a lightning ground rod with a current sensor coil, an optical transmitter, an optical fiber cable link, a detector receiver, and a recording system. The transmitter is a wideband pulse transformer driving an IR LED emitter. The transmitter operates linearly as a transducer. A low loss fiber bundle provides isolation of the recorder system from the electromagnetic field of the lightning strike. The output of an optical detector receiver module is sampled and recorded in digital format. The significant factors considered in the design were dynamic range, linearity, mechanical configuration, electromagnetic isolation, and temperature compensation.

Grove, C. H.↗

NASA NTRS1974

Electric field measuring and display system

An apparatus is described for monitoring the electric fields of cloud formations within a particular area. It utilizes capacitor plates that are alternately shielded from the clouds for generating an alternating signal corresponding to the intensity of the electric field of the clouds. A synchronizing signal is produced for controlling sampling of the alternating signal. Such samplings are fed through a filter and converted by an analogue to digital converter into digital form and subsequently fed to a transmitter for transmission to the control station for recording.

Wojtasinski, R. J.↗

NASA NTRS1973

Lightning tracking system

A system is described for locating lightning strikes by developing the coordinates of a pair of lines, each of which is produced at a reference sensing station. At each station there are a pair of directional antennas which produce analog signals responsive to a lightning stroke. These analog signals are fed to a pair of integrators which integrate the signals for a predetermined period of time so as to produce the X and Y coordinate of a particular line. The analog signals are also fed through a square rooter, a Schmitt trigger circuit, and flip-flops to produce pulses for starting and stopping the integrators. The system at the remote station is similar to that at the central station and is tied to the circuitry at the central station through logic circuits to minimize the chance of error from spurious signals. Computers, printers, and plotters are utilized to plot the exact location of the lightning stroke.

Wojtasinski, R. J.↗

NASA NTRS1973

Measuring the electric field of a cloud

Network of electric field measuring stations has been developed to assess lightning hazard of charged clouds. Sensor data are digitized and transmitted to central processing area for display.

Wojtasinski, R. J.↗

NASA NTRS1973

An automatic lightning detection and photographic system

Conventional 35-mm camera is activated by an electronic signal every time lightning strikes in general vicinity. Electronic circuit detects lightning by means of antenna which picks up atmospheric radio disturbances. Camera is equipped with fish-eye lense, automatic shutter advance, and small 24-hour clock to indicate time when exposures are made.

Wojtasinski, R. J.↗

NASA NTRS1973

Lightning instrumentation for warning and measurement

A presentation of instrumentation techniques used at Kennedy Space Center for assessing the hazards of lightning, measure lightning currents, induced voltage effects and assess the probability of lightning strikes to launch structures. The electric field and sferics are measured to determine the lightning hazard from the clouds. Measurements are made on launch structures to determine the magnitude of lightning currents and the induced voltages. Photographs are taken to ascertain the location of lightning strikes. Data is analyzed and presented on operations personnel and the Weather Office for assessment of impact on launch critical electromechanical systems and industrial operations.

Wojtasinski, R. J.↗

NASA NTRS1972

Automatic lightning detection and photographic system

A system is presented for monitoring and recording lightning strokes within a predetermined area with a camera having an electrically operated shutter with means for advancing the film in the camera after activating the shutter. The system includes an antenna for sensing lightning strikes which, in turn, generates a signal that is fed to an electronic circuit which generates signals for operating the shutter of the camera. Circuitry is provided for preventing activation of the shutter as the film in the camera is being advanced.

Wojtasinski, R. J.↗