Engineering Papers⌕ Search

Engineering topics

Wiwi, Michael

Publications and source records attributed to Wiwi, Michael.

Fine Pitch Bonding for High Density Interconnects

CTE (coefficient of thermal expansion) mismatch between two wafers has potential for brittle failure when large areas are bonded on top of one another (wafer to wafer or wafer to die bonds). To address this type of failure, we proposed patterning a polymer around metallic interconnects. For this project, utilized benzo cyclobutene (BCB) to form the bond and accommodate stress. For the metal interconnects, we used indium. To determine the benefits of utilizing BCB, mechanical shear testing of die bonding with just BCB were compared to die bonded just with oxide. These tests demonstrated that BCB, when cured for only 30 minutes and bonded at 200°C, the BCB was able to withstand shear forces similar to oxide. Furthermore, when the BCB did fail, it experienced a more ductile failure, allowing the silicon to crack, rather than shatter. To demonstrate the feasibility of using BCB between indium interconnects, wafers were pattered with layers of BCB with vias for indium or ENEPIG (electroless nickel, electroless palladium, immersion gold). Subsequently, these wafers were pattered with a variety of indium or ENEPIG interconnect pitches, diameters, and heights. These dies were bonded under a variety of conditions, and those that held a bond, were cross-sectioned and imaged. Images revealed that certain bonding conditions allow for interconnects and BCB to achieve a void-less bond and thus demonstrate that utilizing polymers in place of oxide is a feasible way to reduce CTE stress.

36 MATERIALS SCIENCE↗

Low-power MEMS wakeup system

There is provided a near-zero-power wakeup system in which a MEMS sensor for mechanical or acoustic signals is coupled to a very-low-power complementary metal oxide semiconductor (CMOS) application-specific integrated circuit (ASIC). Power consumption can be minimized by operating the ASIC with sub-threshold gate voltages.

30 DIRECT ENERGY CONVERSION↗

High sensitivity single-axis MEMS accelerometer with bilateral flexures

A microelectromechanical systems (MEMS) accelerometer that has high sensitivity to motion along the z axis is discussed. The device includes two symmetrical sets of bilateral, diametrically opposed high aspect ratio flexures that tether a movable proof mass to the frame of the device. The flexures are designed in such a way as to restrict movement of the proof mass along the x and y axes but readily allow motion along the z axis. More specifically, when the device experiences an acceleration along the x or y axes, the proof mass is restricted from moving because some of the bilateral, diametrically opposed flexures are in compression and others are in tension.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Second harmonic generation in resonant optical structures

An optical second-harmonic generator (or spontaneous parametric down-converter) includes a microresonator formed of a nonlinear optical medium. The microresonator supports at least two modes that can be phase matched at different frequencies so that light can be converted between them: A first resonant mode having substantially radial polarization and a second resonant mode having substantially vertical polarization. The first and second modes have the same radial order. The thickness of the nonlinear medium is less than one-half the pump wavelength within the medium.

36 MATERIALS SCIENCE↗

Single crystal micromechanical resonator

A single crystal micromechanical resonator includes a suspended plate of lithium niobate or lithium tantalate. The suspended plate and a support structure are formed from a single crystal.

36 MATERIALS SCIENCE↗

Single crystal micromechanical resonator and fabrication methods thereof

The present invention relates to a single crystal micromechanical resonator. In particular, the resonator includes a lithium niobate or lithium tantalate suspended plate. Also provided are improved microfabrication methods of making resonators, which does not rely on complicated wafer bonding, layer fracturing, and mechanical polishing steps. Rather, the methods allow the resonator and its components to be formed from a single crystal.

36 MATERIALS SCIENCE↗