Engineering topics
Williams, Richard
Publications and source records attributed to Williams, Richard.
A method to quantify the 37 Ar emanation fraction in powders and rocks
In order to make predictions of the potential 37 Ar signal from an underground nuclear explosion, a value for the 37 Ar emanation fraction is needed. Here, a system was developed to quantify the emanation fraction from samples ranging in size from powder to small rocks. Assorted rock samples were irradiated with Watt fission spectrum neutrons to produce radioactive argon gas via activation of calcium. The argon produced was extracted on a custom apparatus and cryogenically trapped. The extracted gas was then processed to separate the argon and load it into a proportional counter for counting. The emanation fraction of argon gas from the rock samples was then calculated by comparing the measured and predicted activities.
Correlation of Non-proportionality and Scintillation Properties with Cerium Concentration in YAlO 3 :Ce
Cerium doped YAlO3 (YAP:Ce) is an interesting oxide scintillator in that it exhibits a wider range of light yield non-proportionality on a sample-to-sample basis than most other well-known oxide scintillators. In general, most oxide materials, such as BGO and LSO:Ce, are thought to have an intrinsic proportional response that is nearly constant between samples and independent of growth conditions. Since light yield nonproportionality is responsible for degrading the achievable energy resolution of all known scintillators, it is important to understand what contributes to the behavior. In this study, in an attempt to understand if the phenomenon can be affected by growth parameters or by other means, seven samples of YAP:Ce were collected from various sources, and eight samples were grown inhouse using the Czochralski method. Based on optical and scintillation measurement as well as direct measurement of the cerium concentration, it was determined that the light yield proportionality in YAlO3:Ce is strongly related to the cerium concentration. In this work, samples that were found to have a higher relative cerium concentration displayed a more proportional light yield response. In addition, it was determined that samples with a higher cerium concentration also exhibit a faster decay time and an enhanced energy resolution when compared to samples with less cerium. Finally, it was also determined that growth in a reducing atmosphere can effectively suppress a parasitic optical absorption band.
Methods for using argon-39 to age-date groundwater using ultra-low-background proportional counting
Argon-39 can be used as a tracer for age-dating glaciers, oceans, and more recently, groundwater. With a half-life of 269 years, 39Ar fills an intermediate age range gap (50-1,000 years) not currently covered by other common groundwater tracers. Therefore, adding this tracer to the data suite for groundwater studies provides an important tool for improving our understanding of groundwater systems. We present the methods employed for arriving at an age-date for a given sample of argon degassed from groundwater.
The muon g-2: Dyson-Schwinger status on hadronic light-by-light scattering
We give a status report on the hadronic light-by-light scattering contribution to the muon’s anomalous magnetic moment from the Dyson-Schwinger approach. We discuss novel, model-independent properties of the light-by-light amplitude: we give its covariant decomposition in view of electromagnetic gauge invariance and Bose symmetry, and we identify the relevant kinematic regions that are probed under the integral. The decomposition of the amplitude at the quark level and the importance of its various diagrams are discussed and related to model approaches.
Influence of the nonperturbative quark-gluon vertex on the meson and baryon spectrum
We present a calculation of the Hadron spectrum in the Dyson-Schwinger/Bethe-Salpeter approach to continuum QCD. A sophisticated truncation featuring all covariant structures of the quark-gluon vertex, with its inherent flavour dependence, is employed in a framework that preserves the dynamics of chiral symmetry breaking. The study is suggestive as to the relevance of additional resonant and non-resonant two- and three-body contributions.
Dynamical mass generation in unquenched QED using the Dyson-Schwinger equations
We present a comprehensive numerical study of dynamical mass generation for unquenched QED in four dimensions, in the absence of four-fermion interactions, using the Dyson-Schwinger approach. We begin with an overview of previous investigations of criticality in the quenched approximation. To this we add an analysis using a new fermion-antifermion-boson interaction ansatz, the Kizilersu-Pennington (KP) vertex, developed for an unquenched treatment. After surveying criticality in previous unquenched studies, we investigate the performance of the KP vertex in dynamical mass generation using a renormalized fully unquenched system of equations. This we compare with the results for two hybrid vertices incorporating the Curtis-Pennington vertex in the fermion equation. We conclude that the KP vertex is as yet incomplete, and its relative gauge-variance is due to its lack of massive transverse components in its design.
Kinetic Monte Carlo simulations of scintillation processes in NaI(Tl)
Developing a comprehensive understanding of the processes that govern the scintillation behavior of inorganic scintillators provides a pathway to optimize current scintillators and allows for the science-driven search for new scintillator materials. Recent experimental data on the excitation density dependence of the light yield of inorganic scintillators presents an opportunity to incorporate parameterized interactions between excitations in scintillation models and thus enable more realistic simulations of the nonproportionality of inorganic scintillators. Therefore, a kinetic Monte Carlo (KMC) model of elementary scintillation processes in NaI(Tl) is developed in this work to simulate the kinetics of scintillation for a range of temperatures and Tl concentrations as well as the scintillation efficiency as a function of excitation density. The ability of the KMC model to reproduce available experimental data allows for elucidating the elementary processes that give rise to the kinetics and efficiency of scintillation observed experimentally for a range of conditions.
Experimental and computational results on exciton/free-carrier ratio, hot/thermalized carrier diffusion, and linear/nonlinear rate constants affecting scintillator proportionality
Models of nonproportional response in scintillators have highlighted the importance of parameters such as branching ratios, carrier thermalization times, diffusion, kinetic order of quenching, associated rate constants, and radius of the electron track. For example, the fraction ηeh of excitations that are free carriers versus excitons was shown by Payne and coworkers to have strong correlation with the shape of electron energy response curves from Compton-coincidence studies. Rate constants for nonlinear quenching are implicit in almost all models of nonproportionality, and some assumption about track radius must invariably be made if one is to relate linear energy deposition dE/dx to volume-based excitation density n (eh/cm3) in terms of which the rates are defined. Diffusion, affecting time-dependent track radius and thus density of excitations, has been implicated as an important factor in nonlinear light yield. Several groups have recently highlighted diffusion of hot electrons in addition to thermalized carriers and excitons in scintillators. However, experimental determination of many of these parameters in the insulating crystals used as scintillators has seemed difficult. Subpicosecond laser techniques including interband z scan light yield, fluence-dependent decay time, and transient optical absorption are now yielding experimental values for some of the missing rates and ratios needed for modeling scintillator response. First principles calculations and Monte Carlo simulations can fill in additional parameters still unavailable from experiment. As a result, quantitative modeling of scintillator electron energy response from independently determined material parameters is becoming possible on an increasingly firmer data base. This paper describes recent laser experiments, calculations, and numerical modeling of scintillator response.
Kinetic Monte Carlo simulations of excitation density dependent scintillation in CsI and CsI(Tl)
Nonlinear quenching of electron-hole pairs in the denser regions of ionization tracks created by γ-ray and high-energy electrons is a likely cause of the light yield nonproportionality of many inorganic scintillators. Therefore, kinetic Monte Carlo (KMC) simulations were carried out to investigate the scintillation properties of pure and thallium-doped CsI as a function of electron-hole pair density. The availability of recent experimental data on the excitation density dependence of the light yield of CsI following ultraviolet excitation allowed for an improved parameterization of the interactions between self-trapped excitons (STE) in the KMC model via dipole-dipole Förster transfer. The KMC simulations reveal that nonlinear quenching occurs very rapidly (within a few picoseconds) in the early stages of the scintillation process. In addition, the simulations predict that the concentration of thallium activators can affect the extent of nonlinear quenching as it has a direct influence on the STE density through STE dissociation and electron scavenging. This improved model will enable more realistic simulations of the nonproportional γ-ray and electron response of inorganic scintillators.
Hadronic contribution to the muon g-2 from a Dyson-Schwinger perspective
A novel approach towards the hadronic contributions to the anomalous magnetic moment of the muon a{sub {mu}} is presented, namely the Dyson-Schwinger equations of QCD. It has the advantage of being valid for all momentum scales and has the potential to address off-shell amplitudes. We present our first results for the pseudoscalar (PS) meson exchange and the quark loop contributions. The meson exchange ({pi}{sup 0},{eta},{eta}{sup '}), a{sub {mu}}{sup LBL;PS} = (84{+-}13)x10{sup -11}, is commensurate with previous calculations, while the quark loop contribution a{sub {mu}}{sup LBL;quarloop} (107{+-}48)x10{sup -11}, is strongly enhanced by vertex dressing effects in the quark photon vertex. Taken seriously this leads to the estimate of a{sub {mu}} 116 591 865.0(96.6)x10{sup -11}, giving a 1.9 {sigma} deviation between theory and experiment.
Hadronic light-by-light scattering in the muon g-2: A Dyson-Schwinger equation approach
We determine the hadronic light-by-light scattering contribution to the anomalous magnetic moment of the muon using the framework of Dyson-Schwinger and Bethe-Salpeter equations of QCD. Our result for the pseudoscalar ({pi}{sup 0},{eta},{eta}{sup '}) meson-exchange diagram is commensurate with previous calculations. In our calculation of the quark-loop contribution we improve upon previous approaches by explicitly implementing constraints due to gauge invariance. The impact of transverse contributions, presumably dominated by vector-meson poles, are only estimated at this stage. As a consequence, our value a{sub {mu}}{sup LBL;quarkloop}=(136{+-}59)x10{sup -11} is significantly larger. Taken at face value, this then leads to a revised estimate of the total a{sub {mu}=}116 591 891.0(105.0)x10{sup -11}.
Volume behavior of quark condensate, pion mass, and decay constant from Dyson-Schwinger equations
We solve the coupled system of Dyson-Schwinger and Bethe-Salpeter equations for the quark propagator and the pion Bethe-Salpeter amplitude on a finite volume. To this end we use a truncation scheme that includes pion cloud effects in the quark propagator and light mesons. We study volume effects in the quark condensate, the pion mass, and the pion decay constant and compare to corresponding results in other approaches. In general we find large effects for volumes below V=(1.8 fm){sup 4}.
Random selection as a confidence building tool
Any verification measurement performed on potentially classified nuclear material must satisfy two seemingly contradictory constraints. First and foremost, no classified information can be released. At the same time, the monitoring party must have confidence in the veracity of the measurement. The first concern can be addressed by performing the measurements within the host facility using instruments under the host's control. Because the data output in this measurement scenario is also under host control, it is difficult for the monitoring party to have confidence in that data. One technique for addressing this difficulty is random selection. The concept of random selection can be thought of as four steps: (1) The host presents several 'identical' copies of a component or system to the monitor. (2) One (or more) of these copies is randomly chosen by the monitors for use in the measurement system. (3) Similarly, one or more is randomly chosen to be validated further at a later date in a monitor-controlled facility. (4) Because the two components or systems are identical, validation of the 'validation copy' is equivalent to validation of the measurement system. This procedure sounds straightforward, but effective application may be quite difficult. Although random selection is often viewed as a panacea for confidence building, the amount of confidence generated depends on the monitor's continuity of knowledge for both validation and measurement systems. In this presentation, we will discuss the random selection technique, as well as where and how this technique might be applied to generate maximum confidence. In addition, we will discuss the role of modular measurement-system design in facilitating random selection and describe a simple modular measurement system incorporating six small {sup 3}He neutron detectors and a single high-purity germanium gamma detector.
Probing the Gluon Self-Interaction in Light Mesons
We investigate masses and decay constants of light mesons from a coupled system of Dyson-Schwinger and Bethe-Salpeter equations. We explicitly take into account dominant non-Abelian contributions to the dressed quark-gluon vertex stemming from the gluon self-interaction. We construct the corresponding Bethe-Salpeter kernel that satisfies the axial-vector Ward-Takahashi identity. Our numerical treatment fully includes all momentum dependencies with all equations solved completely in the complex plane. This approach goes well beyond the rainbow-ladder approximation and permits us to investigate the influence of the gluon self-interaction on the properties of mesons. As a first result we find indications of a nonperturbative cancellation of the gluon self-interaction contributions and pion cloud effects in the mass of the rho meson.
The NASA Clinic System
NASA maintains on site occupational health clinics at all Centers and major facilities NASA maintains an on-site clinic that offers comprehensive health care to astronauts at the Johnson Space Center NASA deploys limited health care capability to space and extreme environments Focus is always on preventive health care
Progress in studying scintillator proportionality: Phenomenological model
We present a model to describe the origin of non-proportional dependence of scintillator light yield on the energy of an ionizing particle. The non-proportionality is discussed in terms of energy relaxation channels and their linear and non-linear dependences on the deposited energy. In this approach, the scintillation response is described as a function of the deposited energy deposition and the kinetic rates of each relaxation channel. This mathematical framework allows both a qualitative interpretation and a quantitative fitting representation of scintillation non-proportionality response as function of kinetic rates. This method was successfully applied to thallium doped sodium iodide measured with SLYNCI, a new facility using the Compton coincidence technique. Finally, attention is given to the physical meaning of the dominant relaxation channels, and to the potential causes responsible for the scintillation non-proportionality. We find that thallium doped sodium iodide behaves as if non-proportionality is due to competition between radiative recombinations and non-radiative Auger processes.
Finite-volume effects and dynamical chiral symmetry breaking in QED{sub 3}
We investigate the impact of finite-volume effects on the critical number of flavors, N{sub f}{sup c}, for chiral symmetry restoration in QED{sub 3}. To this end we solve a set of coupled Dyson-Schwinger equations on a torus. For order parameters such as the anomalous dimension of the fermion wave function or the chiral condensate, we find substantial evidence for a large dependence on the volume. We observe a shift in N{sub f}{sup c} from values in the range of 3.61{<=}N{sub f}{sup c}{<=}3.84 in the infinite-volume and continuum limit down to values below N{sub f}{<=}1.5 at finite volumes in agreement with earlier results of Gusynin and Reenders in a simpler truncation scheme. These findings explain discrepancies in N{sub f}{sup c} between continuum and lattice studies.